Runco Reflection CL-410, Reflection CL-420, Reflection CL-610, Reflection CL-610LT, Reflection CL-810 Ultra Brochure & Specs

REFLECTION™ PORTFOLIO

CL410, CL 420, CL610, CL610LT,

CL810, CL 810 Ultra

H O M E T H E A T E R A N D
H O M E C I N E M A PR O J E C T O R S

REFLECTIO N ™ P O RT F OLIO

ith the Reflection™ Series, Runco brings its famous video performance to a new level of sophistication, while

putting Runco quality within reach of many aspiring home theater aficionados. These six new Reflection™ Series

models combine a highly efficient SuperOnyx™ DLP™ light engine with broad installation and integration options,

establishing the perfect balance between performance, versatility and a variety of budgets.

The CL-410 features a native resolution of 1024 x 576, and provides an HDMI input for pure digital video signal transmission. The

CL-420, CL-610, 610LT (long throw lens), CL-810 and CL-810 Ultra offer a native resolution of 1280 x 720 and HDMI connectivity

for pure digital video signals.

Runco has implemented a host of advancements into all of these projectors’ light engines to take full advantage of their 16:9 widescreen,

high definition (enhanced definition on the CL-410) DMD™ chips. They feature Runco’s Enhanced GEN 3™ technology to produce deeper

blacks, greater contrast ratio and brightness, and richly saturated colors. A sophisticated color-balancing system is engineered into the

Reflection Series that results in the industry’s best gray scale tracking, and far surpasses the capabilities of CRT projectors.

Runco’s acclaimed Vivix™ video processing and scaling assure pristine video imagery with every model and generous light output capabilities

on these projectors are powerful enough to handle larger screen sizes with ease.

All models feature discrete power, aspect ratio and input selection, as well as IR and RS-232 controls, making it simple to partner these

projectors with other audio/video components and automated control systems for a truly high-end home theater system.

In addition, the CL-610/610LT and CL-810/810 Ultra incorporate SLIC™ or Selectable Lamp Intensity Control™, with a two-stage lamp

output level to more closely match projector light output to room and screen size and lighting conditions. The CL-810 and CL-810 Ultra

also provide an electronically controlled iris, zoom, and focus adjustment for precision installation and calibration. The CL-810 Ultra adds

AxiShift™ multidirectional lens shift capabilities.

CL-410

CL-420

CL-610

CL-810

SD C 1 H I G H DE FI N I TION DIG I TA L V I DE O CON T RO L LER

he optional SDC-1 Controller is a versatile system expansion device designed to centralize all video

signal and system control connections for the projector in the equipment rack with other video source

and system control components. This simplifies connections to the projector and preserves all video signals in

the digital domain.

The SDC-1 provides connections for a variety of components and includes both RGB and HDMI inputs. In addition, it

offers configurable serial control for both RS-232 and RS-422, as well as two assignable 12 volt triggers and one dry contact closure. A USB port control is included for ethernet or PC

communication. The SDC-1 is available with the CL-610/610LT and CL-810 and CL-810 Ultra.

As a finishing touch, Runco engineers gave special consideration to the CL-610/610LT and CL-810/810 Ultra cooling systems. These refined systems are

more efficient, fostering longer projector and lamp life, while noise levels have been reduced to a whisper quiet for your home theater enjoyment.

The CL-810 Ultra shares the heritage of Runco’s top of the line models, incorporating O-Path™ technology for an enhanced optical light path and CinOptx™

Proteus premium lenses for superior image quality and the flexibility of six lens choices for a wide variety of throw distance ranges.

For the ultimate in viewing flexibility and enjoyment, Runco’s exclusive, award winning CineWide™ technology is available on the CL-610/610LT and CL-810/810 Ultra. CineWide

with AutoScope is also offered on the CL-810 Ultra. This ground breaking option can transform these superb home theater systems into a true home cinema experience, reproducing 2:35

CinemaScope™ movies with breathtaking accuracy and full vertical screen image height, eliminating useless black bars for the first time.

SDC-1 Controller SpeCifiCationS

Inputs (from video
sources):

2 x HDMI, 2 x HD (RGBHV or YPbPr,
auto-detecting), Composite Video, S-Video

Outputs (to projector):

Digital Video/Control (HDMI connector)
Analog Video (8-pin DIN connector)

Control Options:

Discrete infrared remote, Serial (RS-232 or
RS-422, selectable), USB, Front-panel input
select, Wired IR remote

Trigger Outputs:

2 x 12 VDC, 800 mA

Dry Contact Output:

Floating; Tip (normally-open) and Ring
(common) shorted together when engaged

Power Requirements:

100 to 240 VAC (auto-sensing)
50/60 Hz, 160W

Operating Environment:

41°– 95° F, (5° – 35° C),
0% – 90% Humidity (non-condensing)

Dimensions:
(w/out feet)

Width: 17 1/2 in. (444.50 mm)
Depth: 11 1/8 in. (282.58 mm)
Height: 3 1/2 in. (88.24 mm)
Weight: 13 lbs. (5.9 kg)

Regulatory Approvals
(pending):

Complies with FCC, CE, C-Tick

Limited Warranty:

(2) Two years parts and labor from the date
of delivery to the end user

O-Path™ Technology and CinOptx™
Premium Grade Lens Systems are
featured on the CL-810 Ultra. O-Path
efficiently collimates the light energy
from the lamp though the optical
path to maximize light output and
eliminate stray light that can reduce
brightness and compromise contrast
ratio performance. The broad variety
of lenses in the CinOptx family are
designed to bring images faithfully to
the screen without the geometric
and color spectrum aberrations
common among “production” lenses.

Runco International has carefully
developed a full set of specification
standards for our video projectors
that is founded upon more realistic
and easier to understand criteria for
expressing the light output or
brightness capability of a display
device, as well as its contrast
ratio. The Cinema Standards
Measurement System™ was
developed based on the actual
experience one has in a movie
theater, providing the consumer with
an objective reference point to
compare specifications.

Runco’s exclusive CineWide™ and
CineWide with AutoScope™
technology ensures uncompromised
widescreen reproduction of movies
originally filmed in the CinemaScope

2.35:1 format. Through a combination
of software, electronics and
anamorphic optics, the projector is
able to use the full pixel array on its
DMD chip, thereby producing a 2.35
image with enhanced resolution and
increased brightness. The full
vertical height of the screen is filled
with the image and useless black
bars are eliminated. (Not available
on the CL-410 and CL-420).

The LiveLink™ DVI cabling system is
Runco’s exclusive solution for
reliable, pure digital video signal
transfer. This is the first DVI cabling
system capable of truly supporting
longer runs while preserving all
essential high-resolution video signal
quality. LiveLink is nothing short of a
revolution for home theater design.

The new Reflection Portfolio
products incorporate the Imaging
Science Foundation’s “ISF 3c™”
(Certified Calibration Configuration)
setup and calibration standards in
projector GUI menus to facilitate
picture quality conforming to the
highest standards in the industry.

™

CL-810 Ultra

CineWide and AutoScope technology is the talk of the industry.

These are among the awards and acknowledgements we have already received.

2005 Overall Most

Creative New Product

Best Video Product

2005

Manufacturer’s

Excellence Award Best

New Product 2005

Electronic House

Product of the Year

2005

Best New Product

2005

CI N E WIDE AN D C INEW I DE W ITH AU TO S CO PE

NO MORE BLACK BARS ABOVE AND BELOW THE PICTURE!

unco’s award winning development of

CineWide™ and CineWide with

AutoScope™ technology has created

a revolution in faithful movie

reproduction, for the first time transforming home

theater into home cinema.

This technology provides uncompromised widescreen

reproduction of movies originally filmed in the

CinemaScope™ 2:35:1 format. It maintains constant vertical height

on the screen just as in a movie theater. When a viewer transitions from 1.78:1 (16:9)

program material to superwide 2.35:1, the image simply gets wider while full screen image

height is maintained, eliminating black bars.

This is done through an ingenious combination of software, electronics and precision

anamorphic optics. With the AutoScope option, the anamorphic lens is motorized and

remote controlled.

With CineWide the projector is able to use the full pixel array on its SuperOnyx™ DMD™

chip, thereby producing a 2.35:1 image with enhanced resolution and increased brightness.

No resolution or image area is lost to useless black bars on the top and bottom of the screen

that contain no picture information. CineWide is available on the CL-610/610LT and

CL-810/810 Ultra. AutoScope is available on the CL-810 Ultra.

A conventional 2.35:1 image displayed

on a 1.78:1 (16:9) screen.

Constant vertical height and full resolution

are maintained. 100% of pixels are used.

Black Bars are eliminated.

Black bars = lost resolution

CineWide™ Technology

Conventional Method

2:35:1 image area

How it works:

The video processor anamorphically “stretches” the 2.35:1 image vertically

to completely fill the display’s imaging chips. This allows all pixels to be used.

2.35:1 Picture on a 16:9 imaging chip 16:9 Image Area

The anamorphic lens then “stretches” the image width to 2.35:1. Correct geometry is restored,

while 100% of the pixels are now used to maintain full resolution and eliminate black bars.

STRETCH

VERTICAL
STRETCH
REMOVES

BLACK BARS

SQUEEZED

APPEARANCE

CineWide requires the use of a 2.35:1 or similar aspect ratio superwide format screen.

IMAGE AREA

16:9 IMAGE AREA

Specifications are subject to change without notice. Optional ceiling bracket available.

© 2007 Runco International. All rights reserved. Reflection, Enhanced GEN3, Vivix, Virtual Cinema, CSMS, CineWide, AutoScope, CinOptx, O-Path,
SLIC, Selectable Lamp Intensity Control, LiveLink, AxiShift, SuperOnyx and VirtualWide are trademarks of Runco International.
Digital Light Processing, DLP and DMD are trademarks of Texas Instruments.
ISF is a trademark of Imaging Science Foundation.
CinemaScope is a trademark of Twentieth Century Fox Film Corporation.
Theater installation photo courtesy of Electronics Design Group, Inc., Piscataway, NJ

*ANSI Lumen specification:

This is the typical projector luminosity (brightness) specification found in most sales literature. This measurement is included in
RUNCO literature to allow for direct comparison with other manufacturer’s projectors. These measurements can be taken at 9,000
to 13,000º Kelvin to get expected performance data when the projector is used in professional, commercial, and industrial displays.

**CSMS Home Theater Calibration ANSI Lumen Specification:

These measurements are taken from the projector as set up in a home theater environment. The projector is calibrated to ISF
specifications including setting the color temperature to 6500º Kelvin, the standard for reproducing video.

**CSMS Home Theater Calibration foot-Lambert (fL) Specification:

This is the unit of measurement used in commercial movie theaters to express image brightness. The Society of Motion Picture
and Television Engineers (SMPTE) specifies 16 fL as the target image brightness for film-based projectors using an open gate
(without film in the projector). More importantly, today SMPTE specifies 12 fL as the target image brightness in Digital Cinema
theaters using DLP™ technology. The foot-Lambert is dependant on screen size, screen gain, and projector light output.

All measurements are made at RUNCO to ANSI/NAPM IT7.228-1997 specifications using the Photo Research PR-650
SpectraColorimeter and Minolta LS-100 Luminance Meter, Video Essentials test DVD, and a Stewart Filmscreen StudioTech 130,

1.3 gain 72-inch wide screen. The projector is calibrated to a color temperature of 6500º Kelvin and has a minimum of 150 hours
of usage.

2900 Faber Street, Union City CA 94587

Tel: [phone] • Fax: [phone]

www.runco.com

Specifications CL-410 CL-420 CL-610/CL-610LT CL-810 CL-810 Ultra

Projector Type:

Digital Light Processing (DLP™), Single-Chip DMD™ Digital Light Processing™ (DLP™)

Single-Chip SuperOnyx™ DMD™

Digital Light Processing™ (DLP™)
Single-Chip SuperOnyx™ DMD™

Digital Light Processing™ (DLP™)
Single-Chip SuperOnyx™ DMD™

Digital Light Processing™ (DLP™)
Single-Chip SuperOnyx™ DMD™

Native Resolution:

1024 x 576 1280 x 720 (16:9) 1280 x 720 (16:9) 1280 x 720 (16:9) 1280 x 720 (16:9)

Aspect Ratios:

4:3, Letterbox, 16:9, VirtualWide™, Cinema,
Virtual Cinema™

4:3, Letterbox, 16:9, Virtual Wide™, Cinema,
Virtual Cinema™

4:3, Letterbox, 16:9, Virtual Wide™, Cinema,
Virtual Cinema™

4:3, Letterbox, 16:9, Virtual Wide™, Cinema,
Virtual Cinema™

4:3, Letterbox, 16:9, Virtual Wide™, Cinema,
Virtual Cinema™

Video Standards:

NTSC, PAL, ATSC NTSC, PAL, ATSC NTSC, PAL, SECAM, ATSC NTSC, PAL, SECAM, ATSC NTSC, PAL, SECAM, ATSC

DTV Compatibility:

480p, 720p, 1080i 480p, 720p, 1080i 480p, 576p, 720p, 1080i 480p, 576p, 720p, 1080i 480p, 720p, 1080i

Picture Size
(16:9 screens)

Recommended Width: 72 – 96 in.
Maximum Width: 150 in.

Recommended Width: 72-96 in.
Maximum Width: 150 in.

Recommended Width: 72-96 in.
Maximum Width: 200 in.

Recommended Width: 72-96 in.
Maximum Width: 200 in.

Recommended Width: 72–96 in
Maximum Width: 200 in.

Throw Distance
(Factor x Screen Width)

(All CineWide Throws are
specified using a 2.35:1
screen)

Zoom 1.37 – 1.67 Zoom 1.40 – 1.70 CL-610 : Zoom 1.37 – 1.82

(with CineWide: 1.55 – 1.82)

CL-610LT : Zoom 1.87 – 2.47
(with CineWide: 1.87 – 2.47)

1.80 to 2.38
(with CineWide: 1.90 – 2.38)

Proteus Lens Options:

A: Fixed 0.67 (for rear-

screen
applications)

B: Zoom 1.22 – 1.44
C: Zoom 1.45 – 1.75
D: Zoom 1.82 – 2.38

(with CineWide

1.38 – 1.77)

E: Zoom 2.42 – 3.57

(with CineWide

1.82 – 2.67)

F: Zoom 3.65 – 5.68

(with CineWide

2.76 – 4.25)

(Proteus A, B or C options not
available with CineWide or
CineWide w/AutoScope)

Horizontal and Vertical
Offset Without CineWide
Option:

(Note: With CineWide
option offsets vary per
lens. Please contact Runco
Technical Support for more
information.)

Horizontal shift: ± 8%,
Vertical shift: Up to 40% above screen center, up to 60%
below screen center

Horizontal shift: ± 8%,
Vertical shift: Up to 46% above screen center, up to 63%
below screen center

Lens is fixed Lens is fixed horizontally

Vertical shift 50% up or down from screen center

Horizontal 13% of screen width left or right

Vertical (ceiling mount)
Up to 71% above screen center, up to 13% below screen
center (depending on lens)

Vertical (floor mount)
Up to 13% above screen center, up to 71% below screen
center (depending on lens )

Light Output:

CSMS™** Specifications:
Home Theater Calibration: 412 ANSI Lumens;
16 Foot-Lamberts (fL);
800 ANSI Lumens*

CSMS** Specifications:
Home Theater Calibration: 421 ANSI Lumens;

16.3 Foot-Lamberts (fL)
850 ANSI Lumens

CSMS** Specifications:
Home Theater Calibration: 395-526 ANSI Lumens;

12.3-19.3 Foot-Lamberts (fL)
1150 ANSI Lumens

CSMS Specifications:
Home Theater Calibration: 442-587 ANSI Lumens;

14.5-21.6 Foot-Lamberts (fL)
†Variable depending on RVR calibration;
1250 ANSI Lumens

CSMS Specifications:
Home Theater Calibration: 442–587 ANSI Lumens;

14.5–21.6 Foot-Lamberts (fL)
†Variable depending on RVR calibration;
1250 ANSI Lumens

Contrast Ratio:

CSMS** Contrast Ratio: 221:1; 2500:1 CSMS** Contrast Ratio: 228:1; 2600:1 CSMS** Contrast Ratio: 185:1-205:1; 1400:1-2200:1 CSMS** Contrast Ratio: 200:1-220:1; 1500:1-3100:1 CSMS** Contrast Ratio: 200:1-220:1; 1500:1-3100:1

Lamp:

250W NSH 250W 250W 250W 250W

Lamp Life:

2000 hours 2000 Hours 2000 Hours 2000 Hours 2000 Hours

Inputs:

(1) Video, (1) S-video, (2) Component,
(1) HDMI w/HDCP, (1) RGB DB15 (1) RS-232

(1) Video, (1) S-video, (2) Component,
(1) HDMI w/HDCP, (1) RGB DB15 (1) RS-232

(1) Composite Video, (1) S-video,
(1) RGB/Component (via BNC),
(1) Component (via RCA), (1) HDMI,
(1) RS-232

(1) Composite Video, (1) S-video,
(1) RGB/Component (via BNC),
(1) Component (via RCA), (1) HDMI,
(1) RS-232

(1) Composite Video, (1) S-video,
(1) RGB/Component (via BNC),
(1) Component (via RCA), (1) HDMI,
(1) RS-232

12V Output:

Max. 0.25 Amps, active when the
projector is on

Max. 0.25 Amps, active when the
projector is on

Max. 0.25 Amps, active when the
projector is on

Max. 0.25 Amps, active when the
projector is on

Max. 0.25 Amps, active when Cinema or Virtual Cinema
Aspect Ratio is selected (CL-810 Ultra/CineWide with
AutoScope only) or when projector is on

Power Requirements:

100 – 240V AC, 50/60Hz, 370W

100-240V AC, 50/60 Hz, 370W 100-240V AC, 50/60 Hz, 310W 100-240V AC, 50/60 Hz, 310W 100-240V AC, 50/60 Hz, 310W

Operating
Environments:

41 to 95ºF (5 to 35ºC);
20-80% humidity (non-condensing)

41° - 95° F, (5° - 35° C),
0% - 90% Humidity (non-condensing)

41° - 95° F, (5° - 35° C),
20% - 80% Humidity (non-condensing)

41° - 95° F, (5° - 35° C),
20% - 80% Humidity (non-condensing)

41° - 95° F, (5° - 35° C),
20% - 80% Humidity (non-condensing)

Dimensions
(w/o feet):

Width: 14 in. (356.00 mm)
Depth: 16 7/8 in. (429.00 mm)
Height: 7 3/8 in. (188.00 mm)
Weight: 25lbs. (11.34kg)

Width: 14 in. (356.00 mm)
Depth: 16 7/8 in. (429.00 mm)
Height: 7 3/8 in. (188.00 mm)
Weight: 25lbs. (11.34kg)

Width: 16 1/2 in. (419.00 mm)
Depth: 16 3/8 in. (416.00 mm)
Height w/feet: 6 1/8 in. (156.00 mm)
Weight: 32 lbs. (14.6 kg) (includes lens)

Width: 19 5/8 in. (499.00 mm)
Depth: 17 5/8 in. (448.00 mm)
Height: 8 3/4 in. (222.00 mm)
Weight: 34 lbs. (15.42 kg) (includes lens)

Width: 19 5/8 in. (499.00 mm)
Depth: 22 in. (559.00 mm)
Height: 8 7/8 in. (226.00 mm)
Weight: 36 lbs. (16.32 kg) (includes lens)

Regulatory Approvals:

Complies with FCC Class B, CE, C-Tick Complies with FCC, CE, C-Tick Complies with FCC Class B, CE, C-Tick Complies with FCC Class B, CE, C-Tick Complies with FCC Class B, CE, C-Tick

Limited Warranty:

Projector: (2) Two years parts and labor from the date of
delivery to the end user.
Lamp Warranty: 1000 hours or (6) Six months, which ever
comes first.

Projector: (2) Two years parts and labor from the date of
delivery to the end user.
Lamp Warranty: 1000 hours or (6) Six months, which ever
comes first.

Projector: (2) Two years parts and labor from the date of
delivery to the end user.
Lamp Warranty: 1000 hours or (6) Six months, which ever
comes first.

Projector: (2) Two years parts and labor from the date of
delivery to the end user.
Lamp Warranty: 1000 hours or (6) Six months, which ever
comes first.

Projector: (2) Two years parts and labor from the date of
delivery to the end user.
Lamp Warranty: 1000 hours or (6) Six months, which ever
comes first.

03/07

Engineered for ISF® calibration.