Runco PlasmaWall XP-OPAL65 DHD Specification

Page 1
For more information visit www.Runco.com or call 800-237-8626 or +1-503-748-1100.
Specications are subject to change without notice. ©Copyright 2010 Runco International Inc. All rights reserved.
Runco® PlasmaWall™
XP-OPAL65 DHD Plasma
Native Resolution: 1920 x 1080
Screen Aspect Ratio: 16:9
Image Area: 57” x 32” (W x H inches)
DTV Compatibility: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p (24,50,60 Hz)
Contrast Ratio: 400:1 (measured at 100 lux); 5000:1 maximum
ISF Settings: Yes
Data/Graphics Compatibility: Up to 1920 x 1200
Power Requirements: 100-240V AC, 50/60Hz
Power Consumption: 790 W (.1 watts in standby), maximum
Operating Environment: 40°- 95º F (5º- 35ºC), 20–80% Humidity (non-condensing) Altitude = up to 9,100 feet (2,800m)
Dimensions (w/o stand) Width: 62.33 in (1582.4 mm Depth: 4.16 in. (104.1 mm) Height: 39.7 in (958 mm)
Weight: 163lbs. (73.98 kg)
Regulatory Approvals: FCC Class B, CE, C-Tick
Limited Warranty: Two years parts and labor from the date of shipment from Runco. RuncoCare™ and Runco RedCarpet™ plans are also available.
The XP-65DHD ships with: Power cords (US, EU), remote control and two batteries (AAA), warranty information and registration card, Runco Operating manual, cable ties.
The Runco XP-65DHD plasma establishes a higher
threshold for at panel display products. Runco’s XP65D­HD’s outstanding performance is so good that it was the rst plasma to meet stringent THX certication standards.
Page 2
For more information visit www.Runco.com or call 800-237-8626 or +1-503-748-1100.
Specications are subject to change without notice. ©Copyright 2010 Runco International Inc. All rights reserved.
Runco® PlasmaWall™
XP-OPAL65 DHD Plasma
Runco DHD Controller Specications
Aspect Ratios: 4:3, 16:9, Letterbox, VirtualWide™, Native, VirtualCinema™ and Cinema
Video Processing: ViVix III™ 1080p output
Video Standards: NTSC, PAL, ATSC and SECAM
Supported Signal Timings: 1080p (23.98, 24, 50, 59.94, 60), 1080i (50, 50 Australia, 59.94, 60), 720p (23.98, 24, 25, 29.97, 30, 50, 60), 576p/i, 480p/i, SCART RGB, standard PC timings
Output: (1) HDMI v1.3 w/ HDCP and Deep Color up to 12 bits/channel; (1) RJ 11 for display control; (1) RJ-11 for display control
Inputs: (1) Composite; (2) S-Video; (1) Component; (2) HD - R (Pr), G (Y), B (Pb), H, V; (2) HDMI v1.3 w/HDCP and Deep Color up to 12 bits/channel
Communications Control Ports: Discrete infrared remote, (1) RS-232 9 pin connector; front panel
Screen Trigger/ Masking Output: (3) +12 VDC, each rated at 250 mA with over-current protection
Power Requirements: 100-240V AC (auto sensing) 50/60 Hz, 40W
Dimensions: Width: 17 1/2 in. (444.50 mm); Depth: 11 3/16 in. (284.10 mm);
Height: 3 3/4 in. (95.25 mm), Weight: 13 lbs. (5.9 kg)
Features: Highly-compatible with today’s video sources, fully-compliant HDMI/HDCP repeater, full ISF™ calibration controls, easy rmware
upgrades via USB or serial, customizable splash screen and side-curtain colors
BRiC Tool: Backup, Recovery and Clone tool for ease of saving, restoring or cloning calibrations settings.
The Runco XP-65DHD plasma establishes a higher
threshold for at panel display products. Runco’s XP65D­HD’s outstanding performance is so good that it was the rst plasma to meet stringent THX certication standards.
Loading...