Runco PFP-11 Brochure
V I V I X P R O C E S S O R S F O R F I X E D P I X E L D I S P L A Y S
V I V I X P R O C E S S O R S
F O R F I X E D P I X E L D I S
P L A Y S
VIVI
VIVI
PIXEL FOR PIXE
PROCESSORS
R U N C O I N T E R N A T I O N A L
V I V I
X
T E C H N O L O G Y
I N NOVAT I V E D I G I TA L P R O C E S S I N G
F O R F I X E D P I X E L D ISPLAY S
M U L I T P L E R E S O L U T IONS
A S P E C T R AT I O C O N T R O L
P I X E L F O R P I X E L
The World’s Finest Home Theater Products™
VIVIX™ PIXEL FOR PIXEL™ PROCESSORS
PFP-7 AND PFP-11
V I V I X
T E C H N O L O G Y
R U N C O I N T E R N A T I O N A L
™
PFP
F O R F I X E D P I X E L D ISPLAY S
M U L I T P L E R E S O L U T IONS
A S P E C T R AT I O C O N T R O L
P I X E L F O R P I X E L
™
I N NOVAT I V E D I G I TA L P R O C E S S I N G
The World’s Finest Home Theater Products™
© 2003 Runco International. All rights reserved. Vivix, Pixel For Pixel and PFP are trademarks of Runco International.
™
V I V I X™ P R O C E S S O R S F O R F I X E D P I X E L D I S P L A Y S
ixed pixel displays, such as DLP, LCD
F
and Plasma displays, have come of
age for home theater applications. Their
compatibility with high-resolution video
sources has made these devices a computer
industry standard for years. Also for years,
the challenge of matching their high quality
displays with standard video signals from
DVD or VHS systems has gone unanswered.
Once again, Runco has met this latest chal-
lenge with its all-new, proprietary VIVIX™
Pixel-for-Pixel™ technology. VIVIX is the
key to turning an otherwise good fixed-pixel
device into a high quality video display suit-
able for the home theater enthusiast. This
technology matches the output resolution,
sync types and output format, to most
efficiently drive the display unit, preventing
‘double scaling’, which can cause a loss of
resolution, or other unwanted artifacts
associated with other processors.
FEATURES
• Pixel-for-Pixel output matched for virtually any fixed-pixel
display
• Film to video (3:2 pulldown) detection
• Time base correction for unstable sources such as VCR’s
• Aspect ratio control for 16:9 or 4:3 screens
• Fully RS-232 or IR Controllable
• Output can be configured for any sync polarity as well as
RGB or Component outputs
OUTPUT RESOLUTIONS:
PFP-7: 854 x 480 1280 x 720 720p
800 x 600 1280 x 768
1024 x 768 480p
1024 x 1024 540p
600p
PFP-11: 854 x 480
• Image shift for flexibility in placement
• Blanking for eliminating the image from being displayed
on screen borders.
• Grey ‘Side bars’ to reduce or eliminate 4:3 burns on
16:9 plasmas or CRT-based Rear Projection televisions
• Pass-through available for high-resolution sources
such as DTV decoders or computers
• 10 bit processing
800 x 600
1024 x 768
1024 x 1024
1280 x 720
1280 x 768
1280 x 1024
1366 x 1024
1366 x 768
480p
540p
600p
720p
In addition to the VIVIX processing, the
PFP-7 and PFP-11 have other features that
no other processor has, including image
shift and blanking capabilities that allow the
image to fit perfectly on the screen. For pro-
jectors that do not have lens shift capability,
the image shift feature adds flexibility to
the projector’s installation without having
to introduce keystone effects in the image.
And to protect 4:3 image burns on plasmas
or CRT-based Rear Projection televisions,
grey side-bars are provided to greatly reduce
or eliminate the possibility of causing irrepa-
rable damage to the display.
Runco’s new PFP-7 and PFP-11 are the
ultimate solution for the Home Theater
enthusiast who wants to get the absolute
best performance AND flexibility from their
fixed-pixel display.
SPECIFICATIONS
Aspect ratios: Anamorphic, Letterbox, 4:3 (on
either 16:9 or 4:3 screens)
Inputs: (1) Composite, (1) S-Video
(1) Component, (1) Pass-through
Video Standards: NTSC, PAL
Control Options: Infrared (with discrete on/off,
aspect ratio and source selection),
RS-232 and front panel
Screen trigger/ (2) 12VDC, 1/8A
masking outputs:
Bandwidth: Video inputs: 5.5 Mhz
Pass-through: 100 Mhz
Power Requirements: 100 – 240 VAC (auto sensing)
50/60 Hz, 15 W
Operating environment: 41° – 95° F (5°-35° C), 0 – 90%
humidity (non-condensing)
Dimensions: Width: 17 1/2 in. (444.50mm)
Depth: 16 in. (406.40mm)
Height: 3 1/2 in. (88.90mm)
Weight: 16 Lbs. (7.26 Kg)
Included Accessories: Rack mounting brackets
Regulatory Approvals: Complies with FCC Class ‘B’, CE,
C-Tick
Limited Warranty: (2) Two years parts and labor from
the date of delivery to the end user
Runco International
2900 Faber Street, Union City, CA 94587
Tel: 510-324-7777 • Fax: 510-324-9300
www.runco.com
®
Call factory for more specific information on export specifications.
Specifications are subject to change without notice.
*854 x 480 and 540p resolutions are available for NTSC only.
12/03
Loading...