Runco D-73d Product Sheet
Runco® 3Dimension™ Series
d-73d
Projection Type: Texas Instruments Digital Light Processing™ (DLP) dual imaging system,
SuperOnyx™ DMD™
Native Resolution: Full HD 1920 x 1080 (1080p)
Aspect Ratio: 16:9, 4:3, Letterbox, VirtualWide, Cinema, VirtualCinema, Native
3D Support: All HDMI 1.4a mandatory 3D formats are supported with included Runco
3Dimension Processing system
DTV Compatibility: See DHD4 Specications
Picture Size (16:9 Screens) in 2D: “Recommended Width: 72 - 132 in.
Maximum Width: 200 in.”
Picture Size (16:9 Screens) in 3D: “Recommended Width: 72 - 100 in.
Maximum Width: 120 in.”
Processing: Runco DHD4 Processor with ViVix IV™ technology and BRiC tool
Control: RS-232 and IR remote, as well as HDMI CEC and Ethernet
Inputs: See 3Dimension Series specications
12V Output: See DHD specications
Video Standards: NTSC, PAL, SECAM, CEA-861D
Calibration: ISF Certied Calibration Conguration
Color Gamut: Fully adjustable, > BT.709 (REC709)
Throw Distance: Standard Lens: 1.89-2.40
(With CineWide Whitney: 1.89-2.40)
(With CineWide Shasta: 1.42-1.80)
Short-throw lens: 1.59-1.86
(With CineWide Shasta: 1.19-1.40)
Horizontal & Vertical Offset: Vertical: Up to 60% of image height down or up from center of screen
Horizontal: Up to 25% of image width left or right from center of screen
Light Output in High-Bright 2D CSMS Specications*: Home Theater Calibration: 900 ANSI Lumens; 58
Mode: Foot-Lamberts (fL); 1400 ANSI Lumens (uncalibrated); Light output will drop
less than 10% over the life of the product.
For more information visit www.Runco.com or call 800-237-8626 or +1-503-748-1100.
Specications are subject to change without notice. ©Copyright 2010 Runco International Inc. All rights reserved.
Runco® 3Dimension™ Series
d-73d
Light Output in Standard Brightness CSMS Specications*: Home Theater Calibration: 450 ANSI Lumens;
2D Mode: 29 Foot-Lamberts (fL); 700 ANSI Lumens (uncalibrated); Light output will
drop less than 10% over the life of the product.
Light Output in 3D Mode: CSMS-3D Specications***: Home Theater Calibration: 311 ANSI Lumens;
20 Foot-Lamberts (fL); 483 ANSI Lumens (uncalibrated); Light output will
drop less than 10% over the life of the product.
Contrast Ratio: CSMS Contrast Ratio: 330:1 3 settings: Innity:1, 20000:1, and 10000:1
(sequential). ColorContrast™ for up to 50% higher contrast by color.
Illumination System: InniLight™ LED (RGB) illuminiation system
Color Space: 135% NTSC color gamut in proprietary Runco Native mode with Runco
Smart Color™ and Personal Color Equalizer™. Presets for
SMPTE C, REC-709, DCI, EBU, and others. Adobe achievable.
CineWide: CineWide® and CineWide with AutoScope™ utilizing Whitney and
Shasta lens
Maintenance: Zero maintenance, solid state optical path (no lamps to replace)
Power Requirements for projector: 100 VAC to 240 VAC +/- 10% @ 50/60Hz
Power Consumption for projector: 180-480 W typical (2W standby)
Operating Temperature: 10°C to 40°C, up to 7,500’ altitude,10°C to 35°C, 7,500’ to 10,000’ altitude
Operating Humidity: 10-80% humidity (non-condensing)
Dimensions
(w/o feet or optional CineWide lens): Width: 22.1 in (561.34 mm); Depth: 24.5 in (622.3 mm); Height: 16 in
(406.4 mm); Weight: 100 lbs (without lens)
Warranty and Service: Projector: (2) Two years parts and labor from the date of shipment from
Runco. Extended RuncoCare™, Red Carpet™, and PremierCare™
assurance available
Regulatory: FCC Part 15 Class B, CE Class B, UL, cUL, CB, RoHS, WEEE, local
conformances as required
*Measured on a 1.3 gain, 72" wide 16:9 screen
**distance/screen width, tolerance +/-2.5%
***Measured on a 3.0 gain, 73" wide, 16:9 screen
For more information visit www.Runco.com or call 800-237-8626 or +1-503-748-1100.
Specications are subject to change without notice. ©Copyright 2010 Runco International Inc. All rights reserved.
Loading...