RUNCO CP-42HD, CP-52HD installation Guide

CP-42HD
CP-52HD

Climate Series High Definition LCD Monitor

Runco CP-42HD/CP-52HD Owner’s Operating Manual i

ii Runco CP-42HD/CP-52HD Owner’s Operating Manual

RuncoCare 1 Year Limited Warranty Features

Warranty Coverage

Length of Warranty

Eligibility

TM

RuncoCare

Congratulations on your purchase of a Runco® product! With proper installation, setup and care, you should enjoy many
years of unparalleled video performance.

This RuncoCare One Year Limited Warranty is provided free of charge by Runco International, LLC (“Runco”) with the
purchase of a covered Runco product.

The following terms and conditions of the RuncoCare One Year Limited Warranty represent a contract between us,
Runco, and you, the customer, who has purchased a Runco product. This contract applies to purchases of covered
Runco products occurring on or after the effective date printed at the bottom of this document. Runco reserves the right
to change the terms of this contract, and such changes shall apply to purchases of covered Runco products that occur on
or after any future effective date.

1-Year protection from defects in material and workmanship
Access to 24x7 phone support
Complimentary, 2nd day one-way shipping

One Year Limited Warranty

For North America

Runco warrants its products to be free from defects in material and workmanship during the warranty period provided
below. If, in Runco‟s sole determination, a product proves to be defective in material or workmanship during the warranty
period, Runco will repair the product, replace the product with a substantially similar new or like new product, or refund a
prorata share of the purchase price (calculated based on the remainder of the warranty period and the then-current
MSRP2 of a similar product), if repair or replacement of the product is determined by Runco to not be feasible. Runco has
sole discretion in determining whether a same or like model is offered, and what constitutes as „substantially similar
model‟.

Runco products are warranted for one (1)-year from the date of shipment from Runco. Lamps are warranted six (6)
months from the date of shipment or 1000 hours of use, whichever comes first. All other accessories, which include but
are not limited to, cables, remotes, carrying cases, lens cap and other peripherals sold with the Runco product, are
warranted for ninety (90) days from the date of the original shipment of the accessory.

This RuncoCare One Year Limited Warranty is valid only for the first customer who purchases the covered product from
an authorized Runco dealer or distributor. This warranty is not transferable. You may be required to provide proof of
purchase in order to receive warranty services.

1. Runco may update this list of products excluded from this warranty from time to time at Runco’s sole discretion, but updates to the list of
covered products will not apply on a retroactive basis.

2. MSRP is defined as the most recent product price listed on Runco’s price list.

Runco CP-42HD/CP-52HD Owner’s Operating Manual iii

RuncoCare Claim Procedure

Warranty Exclusions

In the event of a product defect, please follow the warranty claim procedure provided below:

The customer is required to contact a Runco dealer or Runco Technical Support via email at [e-mail] or

via phone at (toll free) 800-23-RUNCO (800-237-8626). If the customer is located outside North America, call +3589
4200 554 in Europe for product service.

Be prepared to provide the date of purchase, the place of purchase, serial number, product model number,

description of the problem and troubleshooting steps already attempted.

Runco Technical Support staff will attempt to correct any minor issues that may be causing the problem. If Runco is

unable to resolve the problem through troubleshooting, a Return Material Authorization (RMA) number will be issued
for the exchange of the defective product if it is determined that the claim was made within the coverage period of the
Standard Limited Warranty.

If it is determined that the Standard Limited Warranty applies to the claim, the customer will need to return the

defective product to the Runco repair depot location specified by the Runco technical support representative. The
customer will need to properly package the defective product, consisting of the product only, and not include any
accessories (e.g., cables, remotes, carrying cases, lens, lens cap and other peripherals) and return it to the Runco
repair depot specified by the technical support representative. It is the customer‟s responsibility to properly package
the hardware, include all appropriate materials, and return it to the location specified by the Runco technical support
department. The customer will need to address and resolve any shipping damage claims directly with the shipping
company.

The customer is responsible for providing a suitable box to ship the defective product to an authorized Runco repair

depot. Boxes may be purchased from a Runco technical support representative.

The customer is responsible for paying freight charges to ship the defective product to an authorized Runco repair

depot.

For in-warranty repairs, Runco will pay freight charges to return the repaired/replacement product (which shall not

include accessories--e.g., cables, remotes, carrying cases, lens cap and other peripherals sold with the Runco
product) to the customer from the Runco repair depot.

Once an RMA has been created, the customer may contact [e-mail] for follow-up questions or

confirmation status of the claim process.

This RuncoCare Standard Limited Warranty does not include or is limited by the following:

1. Products not purchased from an authorized Runco dealer

2. Rental costs incurred by the customer in the event of product defect or failure

3. Any product with a defaced, modified, or removed serial number

4. Damage, deterioration, or malfunction resulting from:
a. Accident, abuse, misuse, neglect, improper ventilation, fire, water, disaster, lightning, or other acts of nature,

smoke exposure (cigarette or otherwise), unauthorized product modification (including use of an unauthorized

mount), or failure to follow instructions supplied with the product
b. Repair or attempted repair by anyone not authorized by Runco
c. Any damage to the product due to shipment
d. Removal or installation of the product
e. Causes external to the product, such as electric power fluctuations or failure
f. Use of supplies or parts (including lamps) that are not purchased from Runco or do not meet Runco‟s

specifications
g. Normal wear and tear
h. Expected lamp degradation and normal decrease in lamp output over a period of time or as the lamp is consumed
i. Customer caused defects, including but not limited to, scratched/defaced/altered plastics
j. Failure to follow maintenance procedures as outlined in the product‟s user guide where a schedule is specified for

regular cleaning of the product
k. Opening the product and/or tampering with internal circuitry
l. Products lost, stolen or discarded

iv Runco CP-42HD/CP-52HD Owner’s Operating Manual

Extended Service Options

Sub Pixel Policy

Other Terms and Conditions

Online Product Registration

Limitation of Implied Warranties

m. Any damage or dissatisfaction associated with latent images, “burn-in,” or any other damage determined by

Runco to be the result of customer use patterns
n. Any other cause, which does not relate to a product defect in material or workmanship

5. Removal, installation, and set-up service charges are excluded from this Standard Limited warranty

6. Black uniformity issues or other LCD issues associated with usage outside the Runco recommended guidelines and
specifications for the product

7. Bright or dark sub pixels that are characteristic of LCD technology and considered by Runco to be acceptable and
within Runco‟s manufacturing specifications. (See Sub Pixel Policy below)

8. Second day shipment delivery time and availability may vary based on origin and destination and Runco is unable to
deliver to PO Box and FPO Box addresses

It is not uncommon for one or more sub pixels to become bright or dark during or after the manufacturing process. A
bright sub pixel is one that remains in the on position, and a dark sub pixel is one that appears black or off. The sub
pixels are usually hard to see and will not detract from the display quality or usability at normal viewing distance. The
following are Runco‟s criteria for identifying bright or dark sub pixels that would be considered unacceptable: a) the
number of bright or dark sub pixels; b) the location of the bright or dark sub pixels; c) the color of the bright sub pixels; and
d) the Runco model size. If sub pixels have been identified as unacceptable by Runco the LCD will be deemed faulty and
will be replaced if reported within the warranty period. If there are issues with bright or dark sub pixels, gather the
information listed above and call or email [e-mail].

1. Runco will not accept returned Product unless an RMA number has been issued by Runco.

2. If an Advance Exchange return occurs, it is the customer‟s responsibility to properly package the defective product
and ship it to the address provided by the Runco technical support representative with the RMA number prominently
displayed. If the defective product is not properly packaged and is damaged in transit during its return to Runco, you
may be invoiced for either the repair costs, if repairable, or the MSRP of a replacement product and shipping costs
incurred by Runco.

3. The repaired or replaced product will assume the remainder of your original product‟s RuncoCare Service Plan term
or 90 days from the date the repaired unit is shipped, whichever is longer.

4. If a replacement product is sent, the customer agrees to retain the replacement for the product you purchased and
your defective product becomes the property of Runco.

Runco offers extended and expanded service plans. For information on additional product protection, please email
[e-mail] or call (toll free) 800-23-RUNCO (800-237-8626).

Please visit http://www.runco.com/support/product-registration/ to register product.

RUNCO PROVIDES NO WARRANTIES, EXPRESS OR IMPLIED, EXCEPT THOSE EXPRESSLY PROVIDED HEREIN.
RUNCO EXPRESSLY DISCLAIMS ALL OTHER WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Runco CP-42HD/CP-52HD Owner’s Operating Manual v

Exclusion of Damages

Effect of Local Law

COPYRIGHT AND TRADEMARKS

RUNCO‟S MAXIMUM AGGREGATE LIABILITY HEREUNDER IS LIMITED TO THE COST OF REPAIR OR
REPLACEMENT OF THE PRODUCT.

1. RUNCO SHALL NOT BE LIABLE FOR DAMAGE TO OTHER PROPERTY CAUSED BY ANY DEFECT IN THE

PRODUCT, DAMAGES BASED UPON INCONVENIENCE, LOSS OF USE OF THE PRODUCT, LOSS OF TIME,
LOSS OF PROFITS, LOSS OF BUSINESS OPPORTUNITY, LOSS OF GOODWILL, INTERFERENCE WITH
BUSINESS RELATIONSHIPS, OR OTHER COMMERCIAL LOSS, EVEN IF THE CUSTOMER HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

2. RUNCO SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, INDIRECT, SPECIAL, OR

PUNITIVE DAMAGES ANY OTHER DAMAGES, WHETHER INCIDENTAL, INDIRECT, CONSEQUENTIAL OR
OTHERWISE.

3. RUNCO SHALL NOT BE LIABLE FOR ANY CLAIM AGAINST THE CUSTOMER BY ANY OTHER PARTY.

This warranty gives you specific legal rights, and you may have other rights, which vary from locality to locality. Some
localities do not allow limitations on implied warranties and/or do not allow the exclusion of incidental or consequential
damages, so the above limitations and exclusions may not apply to you.

© Copyright 2009 Runco International, LLC (“Runco”). This document contains proprietary information protected by
copyright, trademark and other intellectual property laws. All rights are reserved. No part of this manual may be
reproduced by any mechanical, electronic or other means, in any form, without prior written permission of Runco.

The trademarks reproduced in this Runco Owner‟s Manual and used on the Runco Products are either owned by Runco
or are licensed by Runco. You may not reproduce or use the trademarks without the prior written consent of Runco.

Runco Products are manufactured under one or more of the following patents: US. Patent 6755540 and Other Patents

Pending.

vi Runco CP-42HD/CP-52HD Owner’s Operating Manual

Important Safety Instructions

Thank you for your purchase of this quality Runco video product! For the best performance, please read this manual
carefully as it is your guide through the menus and operation.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not block any of the ventilation openings. Install in accordance with the manufacturer‟s instructions.

6. Do not place your LCD monitor on an unstable stand, shelf or table. Serious bodily injury and/or damage to the LCD
monitor may result if it should fall. Your sales person can recommend an approved wall mounting kit. A special wall
mounting kit is available for this model. To prevent injury, the LCD monitor must be securely attached to the wall in
accordance with the installation instructions provided with the mounting kit. Always mount using recommended and
substantial fixture and fittings.

7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)
that produce heat. Do not mount near an open flame source. Open flames must never be used near this LCD
monitor.

8. This monitor surpasses IP56 weatherproof standards. It is not protected against temporary or continuous immersion
in liquid. Do not submerge this monitor in liquid.

9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third
prong is provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for the
replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles and the point
where they exit from the apparatus. Do not allow anything to rest on the power cord and do not locate this LCD
monitor where the cord will be damaged by people walking on it.

11. Only use the attachments/accessories specified by the manufacturer.

12. Use only with a cart, stand, tripod, bracket or table specified by the manufacturer or sold with
the apparatus. When a cart is used, use caution when moving the cart/apparatus to avoid
injury from tip-over.

13. This LCD monitor should be operated only from the type of power source indicated on the
monitor or as indicated in the Operating Instructions. If you are not sure of the type of power supply, consult your
sales person or your local power company.

14. Unplug this apparatus during lightning storms or when unused for long periods of time.

15. Do not use immediately after moving the LCD monitor from a low temperature to a high temperature environment, as
this causes condensation, which may result in fire, electric shock, or other hazards.

16. Before cleaning, be sure to unplug the power cord from the power outlet.

17. Do not apply liquid cleaners or aerosol cleaners directly onto the LCD monitor. Use a damp cloth for cleaning.

Runco CP-42HD/CP-52HD Owner’s Operating Manual vii

18. This LCD monitor should have a minimum
distance of 5cm away from the wall and the
monitor should have 10cm distance around the
top and sides.

19. Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in an way, such
as power supply cord or plug is damaged,
objects have fallen into the apparatus, the
apparatus does not operate normally, or has been dropped.

20. Keep the packing material in case the equipment should ever need to be shipped.

viii Runco CP-42HD/CP-52HD Owner’s Operating Manual

FCC PART 15:

DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC EQUIPMENT (Applicable throughout
the European Union and other European countries with separate collection programs)

INDUSTRY CANADA (ICES-003)

IMPORTANT RECYCLE INSTRUCTIONS

Compliance Information

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme á la norme NMB-003 du Canada.

Lamp(s) inside this product contain mercury. This product may contain other electronic waste that can be
hazardous if not disposed of properly. Recycle or dispose in accordance with local, state, or federal Laws.

For more information, contact the Electronic Industries Alliance at WWW.EIAE.ORG.
For lamp specific disposal information check WWW.LAMPRECYCLE.ORG.

This symbol found on your product or on its packaging, indicates that this product should not be
treated as household waste when you wish to dispose of it. Instead, it should be handed over to an
applicable collection point for the recycling of electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent potential negative consequences to the
environment and human health, which could otherwise be caused by inappropriate disposal of this
product. The recycling of materials will help to conserve natural resources. This symbol is only valid in
the European Union. If you wish to discard this product, please contact your local authorities or dealer
and ask for the correct method of disposal.

Runco CP-42HD/CP-52HD Owner’s Operating Manual ix

x Runco CP-42HD/CP-52HD Owner’s Operating Manual

Table of Contents

RuncoCare™ Standard One Year Limited Warranty ........................................ iii

Important Safety Instructions ........................................................................... vii

Compliance Information .................................................................................... ix

1. Introduction .................................................................................................... 1

About This Manual ........................................................................................... 1

Target Audience ......................................................................................... 1

If You Have Comments About This Manual ............................................... 1

Textual and Graphic Conventions .............................................................. 1

Using This Manual ........................................................................................... 2

Description, Features and Benefits .................................................................. 3

Key Features and Benefits ......................................................................... 3

Parts List .................................................................................................... 3

2. Controls & Functions .................................................................................... 5

Climate Series LCD at a Glance ...................................................................... 5

Controls and Indicators .............................................................................. 5

Climate Series LCD Inputs and Outputs .................................................... 7

Climate Series LCD Remote Control ............................................................... 9

3. Installation .................................................................................................... 12

Remote Control .............................................................................................. 12

PET Film Removal ................................................................................... 12

Battery Installation ................................................................................... 12

Notes on Remote Control Operation ........................................................ 12

Quick Setup ................................................................................................... 13

Installation Considerations ............................................................................. 14

Wall-Mounting the Climate Series LCD ................................................... 14

Connections to the Climate Series LCD ........................................................ 14

Input/Output Connection Panel Access ................................................... 14

Connecting the Climate Series LCD to Source Components .................. 15

Connecting External Speakers (Optional) ................................................ 18

RS-232 Controller Connection ................................................................. 18

Antenna/Cable TV Connection ................................................................ 19

Runco CP-42HD/CP-52HD Owner’s Operating Manual xi

Table of Contents

4. Operations .................................................................................................... 21

Turning on the Power .................................................................................... 21

Changing the OSD Language ........................................................................ 21

Setting the PC Display Properties ................................................................. 22

Using the On-Screen Menus ......................................................................... 23

Picture ...................................................................................................... 25

Audio ........................................................................................................ 26

Time ......................................................................................................... 27

Setup ........................................................................................................ 28

Lock ......................................................................................................... 29

Channel .................................................................................................... 30

Stereo Sound/SAP ......................................................................................... 31

5. Maintenance and Troubleshooting ............................................................ 33

Cleaning ......................................................................................................... 33

Cleaning the Display, Panel Body and Remote Control .......................... 33

Cleaning the Air Filters and Vents ........................................................... 33

Trouble Shooting Tips .................................................................................... 33

6. Serial Communications ............................................................................... 35

RS-232 Connection and Port Configuration .................................................. 35

Serial Command Syntax ................................................................................ 35

7. Specifications .............................................................................................. 38

Climate Series LCD Specifications ................................................................ 38

Climate Series LCD Dimensions ................................................................... 39

Supported Timings ......................................................................................... 41

xii Runco CP-42HD/CP-52HD Owner’s Operating Manual

Runco CP-42HD/CP-52HD Owner’s Operating Manual xiii

List of Figures

2-1. Climate Series LCD Controls and Indicators ................................. 5

2-2. Climate Series LCD Inputs and Output Interfaces ......................... 7

2-3. Climate Series LCD Remote Control ............................................. 9

3-1. HDMI Connections ...................................................................... 15

3-2. Analog RGB Connections ............................................................ 16

3-3. Component Video Connections ................................................... 17

3-4. Composite and S-Video Connections .......................................... 17

3-5. External Speaker Connection ...................................................... 18

3-6. RS-232 Control System Connection ............................................ 18

3-7. Air/Cable Connection ................................................................... 19

4-1. Climate Series LCD OSD Menu Structure ................................... 24

7-1. CP-42HD Dimensions (Front/Side/Rear) ..................................... 39

7-2. CP-52HD Dimensions (Front/Side/Rear) ..................................... 40

xiv Runco CP-42HD/CP-52HD Owner’s Operating Manual

Runco CP-42HD/CP-52HD Owner’s Operating Manual xv

1.1
About This Manual

Target Audience

If You Have Comments
About This Manual…

Textual and Graphic
Conventions

1. Introduction

This Owner‟s Manual describes how to Install, set up and operate a
Runco Climate Series Model CP-42HD and CP-52HD Weatherproof Flat­Panel LCD. Throughout this manual, the Runco CP-42HD and CP-52HD
are referred to collectively as the “Climate Series LCD.” The information
in this manual applies to both products, except where otherwise indicated.

Runco has prepared this manual to help home theater installers and end
users get the most out of the Climate Series LCD.

Runco has made every effort to ensure that this manual is accurate as of
the date it was printed. However, because of ongoing product
improvements and customer feedback, it may require updating from time
to time. You can always find the latest version of this and other Runco
product manuals on-line, at www.Runco.com.

Runco welcomes your comments about this manual. Send them to
[e-mail].

Text Conventions: The following conventions are used in this manual.
In order to clarify the information and instructions provided:

Remote and built-in keypad button identifiers are set in upper-case

bold type; for example, “Press EXIT to return to the previous menus.”

Computer Input (commands you type) and output (responses that

appear on-screen) is shown in monospace (fixed-width) type; for
example:
“To change the aspect ratio to Letterbox, type op aspect = 1

<Enter>.”

All keys with functional names are initial-capped, set in bold type and

enclosed in angle brackets. These keys are the following: <Enter>,
<Spacebar>, <Control>, <Esc> and <Tab>.

<Enter> indicates that you may press either the RETURN or ENTER

key on your keyboard if it has both keys.

In addition to these conventions, underlining, boldface and/or italics are
occasionally used to highlight important information, as in this example:

Runco CP-42HD/CP-52HD Owner’s Operating Manual 1

A carriage return must be used after each command or string.

If you need…

…Turn to page:

Information about obtaining service

iv

General information about the CP-42HD and CP­52HD Flat-Panel LCDs

3

Installation instructions

12

First-time configuration instructions

21

Troubleshooting Tips

33

Specifications for the CP-42HD and CP-52HD Flat­Panel LCDs

39

1.2
Using This Manual

Introduction

Graphic Conventions: These symbols appear in numerous places throughout

the manual, to emphasize points that you must keep in mind to avoid problems

with your equipment or injury:

TIPS highlight time-saving short cuts and helpful guidelines
for using certain features.

NOTES emphasize text with unusual importance or special
significance. They also provide supplemental information.

CAUTIONS alert users that a given action or omitted action
can degrade performance or cause a malfunction.

WARNINGS appear when a given action or omitted action
can result in damage to the equipment, or possible non-fatal
injury to the user.

DANGER appears when a given action can cause severe
injury or death

Use the following table to locate the specific information you need in this manual.

2 Runco CP-42HD/CP-52HD Owner’s Operating Manual