1.9
HSS bi-metal hole saws, with varied toothing
Hole saws
Cutting edges: HSS
Jacket: special steel
Cutting depth: up to max. 38 mm (11/2")
Cutting teeth: varied toothing
Right-hand cutting
Packing unit: individual carton
1.9
Ø
mm
14
16
9
5
Ø
inch
/
16
/
8
dimensions PG
17 A1 / A4 / A5 106 017
19
3
/
4
20 A1 / A4 / A5 106 020
21 ~ PG 13,5 A1 / A4 / A5 106 021
22
24
7
/
8
15
/
16
25 1 A1 / A4 / A5 106 025
27 1 1/
28 1 3/
29 1 1/
30 1 3/
32 1 1/
16
32
8
16
4
33 A2 / A6 / A7 106 033
35 1 3/
8
36 A2 / A6 / A7 106 036
37 PG 29 A2 / A6 / A7 106 037
38 1 1/
2
40 A2 / A6 / A7 106 040
41 1 5/
43 1 11/
44 1 3/
46 1 13/
48 1 7/
8
16
4
16
8
51 2 1 1/
52 A2 / A6 / A7 106 052
54 2 1/
8
55 A2 / A6 / A7 106 055
57 2 1/
4
59 A2 / A6 / A7 106 059
60 2 3/
8
63 A2 / A6 / A7 106 063
64 2 1/
2
65 A2 / A6 / A7 106 065
67 2 5/
8
68 A2 / A6 / A7 106 068
70 2 3/
73 2 7/
4
8
76 3 2 1/
79 3 1/
83 3 1/
86 3 3/
89 3 1/
92 3 5/
95 3 3/
98 3 7/
8
4
8
2
8
4
8
102 4 A2 / A6 / A7 106 102
105 3 1/
108 4 1/
111 4 3/
114 4 1/
121 4 3/
4
8
2
4
127 5 A2 / A6 / A7 106 127
140 5 1/
2
152 6 A2 / A6 / A7 106 152
160 6 5/
168 6 5/
16
8
177 A2 / A6 / A7 106 177
210 8 9/
32
Suitable for unalloyed steel (up to 700 N/mm²
strength), non-ferrous and light metals, plastics, plasterboard and light building boards,
fibreboard, plywood and wood.
Through
Tube
dimensions inch
For
arbor holders
Article no. Price /
A1 / A4 / A5 106 014
~ PG 9 A1 / A4 / A5 106 016
~ PG 11
3
/
8
1
/
2
A1 / A4 / A5 106 019
A1 / A4 / A5 106 022
~ PG 16 A1 / A4 / A5 106 024
A1 / A4 / A5 106 027
A1 / A4 / A5 106 028
~ PG 21
3
/
4
A1 / A4 / A5 106 029
A1 / A4 / A5 106 030
A2 / A6 / A7 106 032
1 A2 / A6 / A7 106 035
A2 / A6 / A7 106 038
A2 / A6 / A7 106 041
A2 / A6 / A7 106 043
1 1/
4
A2 / A6 / A7 106 044
A2 / A6 / A7 106 046
~ PG 36 A2 / A6 / A7 106 048
2
A2 / A6 / A7 106 051
PG 42 A2 / A6 / A7 106 054
A2 / A6 / A7 106 057
~ PG 48 A2 / A6 / A7 106 060
2 A2 / A6 / A7 106 064
A2 / A6 / A7 106 067
A2 / A6 / A7 106 070
A2 / A6 / A7 106 073
2
A2 / A6 / A7 106 076
A2 / A6 / A7 106 079
A2 / A6 / A7 106 083
A2 / A6 / A7 106 086
A2 / A6 / A7 106 089
3 A2 / A6 / A7 106 092
A2 / A6 / A7 106 095
A2 / A6 / A7 106 098
2
A2 / A6 / A7 106 105
A2 / A6 / A7 106 108
A2 / A6 / A7 106 111
4 A2 / A6 / A7 106 114
A2 / A6 / A7 106 121
A2 / A6 / A7 106 140
A2 / A6 / A7 106 160
A2 / A6 / A7 106 168
A2 / A6 / A7 106 200
each €
Characteristics:
• High rotational precision
• Sturdy construction
• Hole saw and shank in two parts, so hole
saws of different diameters can be exchanged
and fitted more rapidly
• A1, A2, A5, A6 arbor with hexagonal shank
and A7 arbor with SDS-plus shank
• A4 arbor with cylindrical shank
• Positive chipping and cutting angles ensure
more aggressive cutting
• Varied toothing ensures:
- smoother cutting
- less effort
- less vibration and heat production
during cutting
- up to three times longer tool life
• The HSS teeth are welded onto a jacket of
special steel
• Good chip removal
• Slots in the jacket side assist removal of
cutouts
• Exchangeable centring drill
• Unsuitable for percussion-drill operation
• Only slight pressure required to start drilling
• Drill with light, steady pressure
• Avoid pendulum movements while drilling
• Observe table of drilling speeds
• Use prescribed cooling agents
RUKO HSS bi-metal hole saws can be used
in hand and pillar drills. When employing pillar
drills, use manual advance only.
Also suitable for other makes of drill.
Prices without arbor.
- 186 -
Loading...