RUIMA RM 610 User Manual

FM Radio

(4)

Press to enter into FM radio mode, press SCAN to enter into radio program
automatic scan. Press for radio program manual scan, Top and bottom
trimming, Turn the TUNER button radio station can be adjusted. Slide around to
adjust radio frequency between 87.5MHz~108.0MHz.

(5) Bluetooth connection

Press to enter into Bluetooth Control connection page, then click "Speaker
Pro BLE" to connect to the speaker.

(6)Line In input - mute

Press to enter into Line IN input page, press to mute music, press
insert a line continue play. Press "Back" to main page.

(7) Equalizer regulation

Press to enter into Sound Set page, and then turn volume or bass or treble to
adjust the volume. There are 4 pre-set EQ modes: dance, Classical, Jazz and Rock.
You can also press G-Eq to access the graphic equalier to set up your preferred
equalize specification.

PORTABLE BATTERY SPEAKER

User Manual

RM-610

4

765

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

Specifications:

Power: 20W
Frequency Response
for main speaker: 80Hz-20KHz

Power Supply: DC9V

3

FCC Warning
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference; and
(2) this device must accept any interference received, including interference that may cause undesired

operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device,

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications not expressly approved by the party responsiblefor compliance

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
andon, the user is encouraged to try to correct the interference by one or more of the following

measures:

could void the user's authority to operate the equipment.

PANEL LAYOUT & FUNCTIONS

1.MIC VOLUME-/+: Mic volume adjustment.

2.LED display.

3.VOLUME-/+: Master volume adjustment.

4.MIC1: Microphone signal input.

5.MIC2: Microphone signal input.

6.TF card input.

7.USB: USB Player/Power Bank 5V 1A
output.

8.POWER/INPUT button.

9.LIGHT/MODE (Light mode selection &
switch on/off button).

10.EQ selection button.

11.Previous song.

12.Play/Pause (In FM mode, hold for 3 seconds the device will enter into automa
tic scan).

13.Next song.

14.LINE input.

15.LED CHARGE STATUS:
RED = Charging
GREEN = Fully charged

16.DC 9V external input.

1 2 3

VOLUMEMIC VOLUME

MIC 1 MIC 2

TF

LIGHT

POWER

USB

EQ

MODE

INPUT

LINE IN

RED CHARGE
GREEN FULL

4 5 6 7 8 9 1011121314 15 16

To control the device via your phone, please find and install the app " Speaker Pro ".
Open the App "Speaker Pro" on your phone, there are 7 function icons on the main
page :

1.Bluetooth Music play

2.USB card play
3

.Light control colour, brightness and light flash mode

FM Radio

4.

DC 9V

5.Control Bluetooth connect

1

2

5

6

6.Line In input - mute
7

.Equalizer,volume adjustment for music, Microphone

and quitar input.

3

7

4

(1) Bluetooth Music play

Press to enter into Bluetooth Music play page, Press "Pick songs to play"
to Pick Song page to choose the song you want to play, press "Done" to return to
Bluetooth Music play page, also you can operate pause, play, backward, forward&
volume adjustment, repeat, random play. Press "Back" to return to the main page.

BASIC OPERATION

1. POWER/INPUT: long press (for above 2 seconds) to turn on the machine; during
working status, short press to select mode: BT/LINE/FM (circulating); during
working status, long press (for above 2 seconds) to turn off the machine.

2. PLAY/PAUSE: during playing status, short press to pause/mute; during FM mode,
long press to automatically scan radio station.

3. MIC VOLUME-/+: Twist the dial anticlockwise to decrease the volume and
clockwise to increase the volume.

4. PREVIOUS/NEXT: during playing status, press to get back to a previous or
next song.

5. VOLUME-/+: adjust volume size.

6.USB: USB Player/Power Bank 5V 1A output.

FM Operation

A. Lightly press Power/Input button to switch to FM mode, long press PLAY/PAUSE
button to automatically scan radio station, by pressing PREVIOUS or NEXT you
can select a previous or next song.
B. When scanning radio programs, adjust the antenna to obtain the best reception.

Bluetooth:

Please press INPUT button on control panel to select Bluetooth mode.
Simultaneously open the Bluetooth setting on your phone, tablet or any other
bluetooth enabled audio device and select "RM-610D"(no need to match code),the
unit and device will then connected via Bluetooth. Press the "next song" and
"previous song" button on the control panel to select the song, press" play/pause"
button to control the playing status.

(2)USB card play
When inserting a USB into the speaker, press to enter the USB Card play
page. To choose a song and play music on the USB card, press "Play" to enter into
the play control page ,where you can operate pause, play, backward, forward &
volume adjustment. Press "List" to return to USB list page, press "Back" to return
to the main page.

(3) Light control colours, brightness and colour change mode

Press to enter into Light Control page, you can select any colour to show the
light colour on the speaker, as well as adjust the brightness of the light. To go back
to main page, press " " in the left corner.
Press "Profiles" to enter into Light Effect mode page, you can choose from a total
of 12 pre-set light effect modes. To return to Light Control page, press "Light"
in the left corner.

1 2 3

21