RuggON PM311B Users Manual
PM-311B
User's Manual
©2016 RuggON Corporation. All rights reserved.
TRADEMARKS
RuggON logo is a trademark of RuggON Corporation, registered in the United States Patent and
Trademark Ofce and in other countries. Microsoft and the Windows logo are either registered
trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
Microsoft products are licensed to OEMs by Microsoft Licensing, Inc., a wholly owned subsidiary
of Microsoft Corporation. The Bluetooth® word mark and logos are registered trademarks owned
by Bluetooth SIG, Inc. All other brand and product names are trademarks or registered trademarks
of their respective owners.
Images shown in this document may vary slightly from actual products at time of shipping.
Information in this manual is subject to change without notice.
Table of Contents
About This Manual
Related Information ......................................................................................1
Conventions..................................................................................................1
Basic Safety Guidelines
Intended Use ................................................................................................2
Maintenance and Operation Overview .........................................................2
Safety ...........................................................................................................3
Electrical Hazards.........................................................................................3
Safety Guidelines for Mounting ....................................................................3
Environmental...............................................................................................3
Radio Transmissions ....................................................................................4
Cleaning and Servicing.................................................................................4
Regulatory and Certification .........................................................................4
Lithium Battery Safety Statement .................................................................5
Chapter 1. Introduction
About This Guide ..........................................................................................6
Unpacking the Device...................................................................................6
Technical Specifications ...............................................................................6
PM-311B Configuration Options ...................................................................8
Parts List.......................................................................................................9
Identifying the Device .................................................................................10
Dimensions .................................................................................................15
Touch Screen Features ..............................................................................16
Chapter 2. Getting Started
Charging the Battery...................................................................................18
Powering the Device On and Off ................................................................20
Installing the MicroSD Card ........................................................................25
Removing the MicroSD Card ......................................................................26
Installing on the Vehicle Dock.....................................................................27
Removing from the Vehicle Dock ...............................................................28
i
Installing on the Desktop Dock ...................................................................29
Removing from the Desktop Dock ..............................................................29
Using the Stylus ..........................................................................................30
Removing the Protective Film from the Display ..........................................30
Chapter 3. Operation
Removing the Snap-on Module Connector Cover ......................................31
Replacing the Snap-on Module Connector Cover ......................................32
Opening the I/O Compartment Cover .........................................................34
Closing the I/O Compartment Cover ..........................................................35
Connecting to External Cabling ..................................................................36
Handstrap, Carrying Handle and Shoulder Strap .......................................38
Installing the External Battery .....................................................................43
Removing the External Battery ...................................................................46
Magnetic Stripe Reader and Barcode Scanner ..........................................49
Connecting to a Wireless Network .............................................................50
Paring the NFC Device ...............................................................................51
Chapter 4. Using BIOS Setup Utility
When to Use the BIOS Setup Utility ...........................................................52
Accessing the BIOS Setup Utility ...............................................................52
Installation an Operating System ................................................................54
BIOS Passwords ........................................................................................56
EC and BIOS ..............................................................................................58
Chapter 5. Using the DashON Utility
Overview .....................................................................................................63
Chapter 6. Troubleshooting
Troubleshoot the Wi-Fi Connection ............................................................65
Troubleshoot Operating the Computer .......................................................66
Call Product Support ..................................................................................66
Chapter 7. Maintenance
Cleaning the Device ...................................................................................67
Returning the Device ..................................................................................67
Contacting RuggON ...................................................................................67
ii
About This Manual
The PM-311B User’s Manual provides instruction for qualied personnel to follow when setting up
a new PM-311B device.
This document is intended for use by qualied personnel to compliment the training and expertise,
not to replace it.
Related Information
Current information and manuals are available for download at the following website:
http://www.ruggon.com
Conventions
Bolded or underlined text is used to emphasize the designated information.
A Note is used to provide additional information for the device or settings.
A Caution is used to warn against potential hazards or to caution against unsafe practices.
A Warning is used to identify immediate hazards for property damage, injury or death.
1
Basic Safety Guidelines
The following safety guidelines are intended to help protect the user from injury and prevent
damage to the hardware.
Do not place anything on the AC adapters power cable and make sure the cable is not
located where it can be tripped over or stepped on.
Do not cover the AC adaptor as it reduces the cooling
Do not use the AC adapter while it is inside the carrying case.
Use only the AC adapter, power cord, and batteries that are approved for use with the device.
Use of another type of battery or AC adapter may cause risk of re or explosion.
If you use an extension cable with the AC adapter, ensure that the total ampere rating of
all products plugged in to the extension cable does not exceed the ampere rating of the
extension cable.
If the device is moved between environments with very different temperature and/ or humidity
ranges, condensation may form on or within the device. Avoid damaging the device by
allowing sufcient time for the moisture to evaporate before using the device.
When disconnecting cables, pull on the connector or on its strain relief loop, not on the
cable itself. When pulling out or plugging in the connector, keep it evenly aligned to prevent
bending the connector pins.
Intended Use
The PM-311B rugged tablet is equipped with multi-functional terminals for stationary and mobile
applications in industrial environments such as logistics, warehousing, eet management,
manufacturing and the automotive industry.
Read the safety guidelines thoroughly before starting any servicing on the device. Read the
guidelines before powering up the device, and keep this document for later use.
The operator is solely responsible for any damage resulting from unauthorized modications to the
device.
Unintended Application Use
The device is not designed for use in life-support systems or critical safety/security systems where
system malfunction can lead to the direct or indirect endangerment of human life. The operator is
fully responsible for using the device in these situations.
Maintenance and Operation Overview
The PM-311B is designed and manufactured according to strict controls and following the stated
safety regulations. The following list identies incorrect operating uses of the PM-311B. Incorrect
use of the PM-311B can lead to hardware damage, safety issues and possible risk to personnel
health:
The PM-311B is under operation by untrained personnel;
The PM-311B is not maintained as recommended;
The PM-311B is not used as intended.
2
Safety
To prevent injury and damage, read the following safety guidelines prior to operating the
device. The manufacturer assumes no liability for any and all damages arising from misuse or
noncompliance with these guidelines.
Electrical Hazards
Cleaning/Servicing: Power Off the PM-311B
Disconnect the PM-311B from power before cleaning or servicing it.
Power Adapter
Contact an authorized service personnel for repairs to the power pack. In the event of a blown
fuse after replacing the fuse, contact an authorized service personnel to avoid electrical shock.
Use only Supplied Power Cables
RuggON power cables meet industrial requirements for low-temperature exibility, UV resistance,
and oil resistance. Use only supplied power cables from RuggON.
If other power cables are used, the following may apply:
The operator is solely responsible for the resulting damage;
All RuggON warranties are void.
Environmental Hazards
Do not use the PM-311B in locations near/with ammable gases or vapor.
The use of electrical equipment in explosive environments can be dangerous.
Turn off the device when near a gas station, fuel depot, chemical plant or a place where
blasting operations take place.
Safety Guidelines for Mounting
If the PM-311B is installed on a mounting bracket, make sure all mounting equipment meets
with safety and regulatory standards to prevent damage to the hardware or injury.
If installing in a xed location, it is adviced to properly secure the device to prevent loss of the
device.
Environmental
Ambient Temperature
The PM-311B operates on the basis of a passive cooling concept which internal waste heat is
released via the housing surface and requires fresh airow in the environment.
Operating the PM-311B with no fresh cooling air may cause overheating and damage to the
device.
The operating environment should not be enclosed to prevent the cool air being heated by
the heat waste from the device.
3
Connecting and Disconnecting External Devices
To prevent the considerable damage, the PM-311B and the external device should be
disconnected from power when connecting/disconnecting excluding USB devices.
Only Use Authorized Accessories
Only use the supplied cables, power packs and other accessories that have been tested and
approved by RuggON. Contact your local distributor for further information.
Radio Transmissions
Permitted Transmission Power
Follow the national regulations for the maximum permitted transmission power.
The operator is solely responsible for this type of operation.
Radio Frequency Limited Locations
Considering the radio frequency limitation in hospitals and aircraft, the PM-311B can only be
installed with permission.
Industrial computers may affect the function of implanted medical devices such as pacemakers
and may cause malfunction.
Cleaning and Servicing
Disconnect the PM-311B from power before cleaning or servicing.
Never clean the PM-311B with compressed air, a pressure washer or a vacuum cleaner.
If necessary, clean the housing of the PM-311B with a damp cloth.
Clean the touch-screen with a nonabrasive cloth.
Regulatory and Certication
FCC
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
4
5
■
Consult the dealer or an experienced radio / TV technician for help.
Any changes or modifications not expressly approved by the grantee of this device could void the user¡s
authority to operate the equipment.
This device is operation in 5.15 ¡ 5.25GHz frequency range, then restricted in indoor use only, Outdoor
operations in the 5.15 ¡ 5.25GHz is prohibit.
This device is slave equipment; the device is not radar detection and not ad-hoc operation in the DFS
band.
Labeling Requirements
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
RF Exposure Information (SAR)
This device meets the government¡s requirements for exposure to radio waves. This device is
designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF)
energy set by the Federal Communications Commission of the U.S. Government.
The exposure standard employs a unit of measurement known as the Specific Absorption Rate,
or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted using standard
operating positions accepted by the FCC with the EUT transmitting at the specified power level in
different channels.
The highest SAR value for the device as reported to the FCC is 1.487 W/kg when placed next to
the body.
CE Marking
This product has passed the CE test for environmental specifications when shielded cables are
used for external wiring. We recommend the use of shielded cables. Please contact your local
representative for ordering information.
This product has passed the CE test for environmental specifications. Test conditions for passing
included the equipment being operated within an industrial enclosure. In order to protect the
product from being damaged by ESD (Electrostatic Discharge) and EMI leakage, we strongly
recommend the use of CE-compliant industrial enclosure products.
R&TTE
This device complies with the essential requirements of the R&TTE Directive 2014/53/EU.
CB
This device complies with the IEC 60950-1:2005 (second edition)+Am1:2009+Am2:2013.
Lithium Battery Safety Statement
Lithium battery inside. Danger of explosion if battery is incorrectly replaced. Replace only with same or
equivalent type recommended by battery manufacturer.
Introduction
Chapter 1. Introduction
The PM-311B is a rugged device equipped with 802.11, Bluetooth and GNSS for wireless data
communications.
The PM-311B is a rugged 7” tablet computer capable of 1024 x 600 resolution.
The PM-311B supports the following operating systems:
Windows
Windows
Windows
About This Guide
The PM-311B User Manual provides instruction for qualied personnel to use as a guide for setup
of the device. This document is not intended to replace the training and expertise of the end-user.
Unpacking the Device
®
10 IoT Enterprise for Small Tablets 64bits
®
Embedded 8.1 Industry Pro Tablet 64bits
®
Embedded Standard 8 64bits
Before you begin the installation or conguration process make sure to inspect all components
and accessories. Contact your representative if there are any missing or damaged items. See
“Contacting RuggON” on page 67.
Technical Specications
Table 1. Technical Specications
Item Description
Display 7” LED Backlight, 1024 (W) x 600 (H)
Touch screen 5-point capacitive touch screen
Brightness 800 nits
CPU Intel® Celeron® Processor N2930
Operating System
(Optional)
RAM DDR3L@1600 MHz 4 GB RAM (optional: 8 GB)
Storage M.2 SSD 128 GB (optional: 256 GB)
Windows
Windows
Windows
®
10 IoT Enterprise for Small Tablets 64bits
®
Embedded 8.1 Industry Pro Tablet 64bits
®
Embedded Standard 8 64bits
Standard battery: 7.5V, 2900mAh, Li-ion
Battery
Power Supply AC 100V ~ 240V, 50~60Hz input; 19VDC@3.42A, 65W
Dimensions (W x H x L) 225 mm (8.86”) x 27 mm (1.06”) x 168 mm (6.61”)
Weight 950 g (2.09 lbs)
6
Extended hot swappable battery: 7.4V, 4200 mAh, Li-ion
(optional)
Loading...