Ruggard CS-MBLB, CS-MBLI, CS-MBLR User manual

Leather Laptop Stand

Application Instructions

The Ruggard Leather Laptop Stand provides your laptop with improved airflow, increasing the computer’s ability to stay cool during
use. When applied, the stand automatically lifts up your laptop about 17° upon opening the screen. This incline creates an ergonomic
and comfortable position for typing and viewing. The high-quality leather and slim design make for a stylized and attractive accessory
for Apple laptops and select Ultrabooks.

To apply the stand to your laptop, use the following instructions:

1. Using the included alcohol swab, clean the surfaces of your laptop to which the stand’s adhesive strips will be applied.

2. Remove the plastic covering of the adhesive strips.

3. With your laptop closed and the non-leather backed flap on a table, place the bottom of your laptop centered onto the flap’s

adhesive strip.

4. Attach the leather-backed flap’s adhesive strip onto the surface on the back of your laptop’s screen so that the stand fits snugly
around the edge of your laptop.

5. Open your laptop to automatically elevate.