Rudd 024JEZ User Manual

PROJECT NAME ______________________________________________________________________________
LOCATION __________________________________________________________________________________
ARCHITECT__________________________________________________________________________________
ENGINEER __________________________________________________________________________________
CONTRACTOR ______________________________________________________________________________
SUBMITTED BY ______________________________ DATE ________________________________________
UNIT SUMMARY
SUBMIT TAL COVER SHEET
Quantity
Model No.
Total Cooling
Sensible Cooling
Air Ent. Evaporator
Air Lvg. Evaporator
Heating Input
Heating Output
CFM/ESP
EER/SEER
Electrical
Minimum Ampacity
Min.-Max. Breaker
Net Unit Weight
Accessory
Catalog Form Number
ACCESSORIES: NOTES:
PRINTED IN U.S.A. 3-02 DC FORM NO. X11-1123 REV. 1
Supersedes Form No. X11-1123 Rev. 0
SUBMITTAL SHEET FOR (-)ARL- JEZ 2 TO 5 TONS [7.03 TO 17.6 kW] , 16 SEER HIGH EFFICIENCY TWO-STAGE CONDENSING UNITS
FORM NO. X33-1247
JOB NAME LOCATION
CONTRACTOR ORDER NO.
ENGINEER
SUBMITTED FOR APPROVAL RECORD
DATE
UNIT MODEL NO.
COIL MODEL NO.
AIR HANDLER MODEL NO.
DIMENSIONS
[ ] Designates Metric Conversions
UNIT DATA
COOLING PERFORMANCE
EFFICIENCY ................................
_______
SEER
TOTAL CAPACITY*..................
_______
MBH [kW]
SENSIBLE CAPACITY*............
_______
MBH [kW]
OUTDOOR DESIGN TEMP. ....
_______
°F [°C] DB
TEMP. OF AIR ENTERING
EVAPORATOR COIL............
_______
°F [°C] DB
_______
°F [°C] WB
POWER INPUT REQUIREMENT ........
_______
kW
(*uses blower motor heat)
SUPPLY AIR BLOWER PERFORMANCE
TOTAL AIR SUPPLY ................
_______
CFM [L/s]
TOTAL RESISTANCE EXTERNAL
TO UNIT......................................
_______
IWG
BLOWER SPEED ..........................
_______
RPM
POWER OUTPUT REQUIREMENT ..
_______
BHP
MOTOR RATING ........................
_______
HP [W]
POWER INPUT REQUIREMENT ........
_______
kW
ELECTRICAL DATA
POWER SUPPLY ........................
____/____/____
TOTAL UNIT AMPACITY................
_______
AMPS
MINIMUM WIRE SIZE ....................
_______
AWG
MAXIMUM OVERCURRENT DEVICE
FUSES/HACR BREAKER ..........
_______
AMPS
CLEARANCES
ACCESS SIDE 24" [609.6 mm]
AIR INLETS 12" [304.8 mm]
ABOVE UNIT 60" [1524 mm]
Equipped with the Award Winning
Comfort Control System
• Increased Reliability • Fault Recall
• On-Board Diagnostics Active Protection
208-230V/1PH/60Hz
ACCESS PANE L
Model Number
036JEZ/048JEZ/060JEZ 33 [838] 443/8 [1127] 311/2 [800]
ALLOW 60 [1524 mm] CLEARANCE
L
ALLOW 24 [610 mm] ACCESS CLEARANCE
(-)ARL-
024JEZ 23 [584]
AIR DISCHARGE
W
ALTERNATE HIGH VOLTAGE CONNECTION (KNOCKOUT)
11
/32[34 mm]
1
Height “H”
(Inches) [mm]
earth friendly refrigerant
Length “L”
(Inches) [mm]
443/8 [1127] 311/2 [800]
H
AIR INLETS (LOUVERS) ALLOW 6 [152 mm] MIN. CLEARANCE 3 SIDES
Width “W”
(Inches) [mm]
FEATURES FOR (-)ARL- JEZ TWO-STAGE CONDENSING UNITS
2 TO 5 NOMINAL TON [7.03 TO 17.6 kW]
FIELD INSTALLED ACCESSORIES
SPECIAL NOTES ON EQUIPMENT:
• High Efficiency
• All refrigerant connections are on the exterior of the unit, located close to the ground for neat appearing installations.
• Cabinet is constructed of powder painted galvanized steel. The full wrap-around louvered grille protects the coil from damage.
• Copper Tube—Aluminum Fin coils are used on all models.
• The control box is located in the top corner of the cabinet providing easy access through a service panel.
• Control Box Cover.
• Service valves are standard on all models.
• Power and control wiring are kept separate.
• Hard Start Kits standard on all models.
• Separate compressor compartment for easy service access.
• Enhanced Compressor sound-wrap is standard.
• The Comfort Control System
provides on-board diagnostics and fault history for condensing units with single-phase compressors by detecting system and electrical problems without adding sensors. It can also communicate “fault codes” to enabled “L terminal” thermostats. The integrated diagnostics with Active Protection
prevents compressor
operation when damage would occur.
• Features an exclusive 7-Segment LED Display. The information-display quickly and accurately shows technicians the source of malfunctions.
• Reliable Copeland Two-Stage Scroll
Compressor for precise temperature control providing ultimate comfort.
• Comfort Alert
Diagnostics comes installed in each
model.
• Drawn, painted base pan for extra corrosion resistance and sound reduction.
• The 2, 3 and 4 ton models feature an 8-pole motor with a 3 blade outdoor fan. The 5 ton model features the GE
®
ECM two-speed motor with a 3-blade
outdoor fan.
• On-demand dehumidification terminal, when matched with a (-)BHM Air Handler, adjusts airflow to help control humidity for unsurpassed comfort in the cooling mode.
• Factory installed high and low pressure control.
• Certified and rated under ARI Standard 210.
• U.L. listed
• Factory Installed Compressor Time Delay Control.
• Factory run tested prior to shipment.
• Factory limited warranty on parts as follows: Features a 10 year limited parts warranty, applicable only to single-phase products installed in residential applications.
(-)ARL- JEZ Conditional Replacement Warranty: will provide a replacement model (if an exact replacement is not available, an equivalent product will be provided) to the original purchaser if the compressor fails within 10 years. See product warranty card for additional information.
[ ] Designates Metric Conversions
Before proceeding with installation, refer to installation instructions packaged with each model, as well as complying with all Federal, State, Provincial, and Local codes, regulations, and practices.
RHEEM MANUFACTURING COMPANY 5600 Old Greenwood Road, Fort Smith, Arkansas 72908
“In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice.”
PRINTED IN U.S.A. 9-06 DC FORM NO. X33-1247
Low Ambient Control (Model No. RXAD-A07) ..............................
Compressor Crankcase Heater (Model No. 44-17402-44CCH) ......
Thermostat (See Specification Sheet for details) ..........................
Loading...