RUCKUS T710 data sheet

T710
Outdoor 802.11ac Wave 2 4x4:4 Wi-Fi Access Point
CASE STUDY
DATA SHEET
The busiest outdoor locations can have the most demanding wireless requirements.
Somehow you need to provide the same top-tier capacity and performance as a
crowded large oce or convention center oor, but packaged in a way that can stand
up to the rigors of outdoor deployments.
Designed for the highest-density outdoor venues, the Ruckus T710 access point delivers Ruckus’ premier Wi-Fi in an ultra-lightweight, industrial-grade (IP 67-rated) enclosure. This dual-band 802.11ac AP features patented Ruckus technologies to extend range, mitigate interference, and deliver blazing fast performance—up to data rates of 800Mbps (2.4GHz) and 1.733Gbps (5GHz), the highest available for Wi-Fi clients. The T710 also provides a full range of next-generation 802.11ac features to
BENEFITS
GREAT OUTDOOR WI-FI
Experience high performance outdoor Wave 2 Wi-Fi with IP-67 weather proong and dual backhaul options with SFP and 2 gigabit Ethernet ports.
STUNNING WI-FI PERFORMANCE
Extends coverage with patented BeamFlex+™ adaptive
antenna technology while mitigating interference by
utilizing over 4,000 directional antenna patterns.
MULTIPLE MANAGEMENT OPTIONS
Manage the T710 from the cloud, with on-premises physical/virtual appliances, or without a controller
GET OPTIMAL THROUGHPUT
ChannelFly™ dynamic channel technology uses ma­chine learning to automatically nd the least congested
channels. You always get the highest throughput the band can support.
SERVE MORE DEVICES
Connect more devices simultaneously with four MU-MIMO spatial streams and concurrent dual-band
2.4/5GHz radios while enhancing non-Wave 2 device
performance
POWER OTHER DEVICES
Daisy chain and power other devices like an IP camera, or another AP directly from the PoE output port
deliver industry-leading capacity, reliability, and coverage in the most crowded outdoor
spaces.
The T710 is an ideal solution for high-density public venues such as airports,
convention centers, plazas, malls, and other dense urban environments. It is also well­suited to public outdoor hotspots, smart cities, and coverage for outdoor enterprise and university campuses, where support for data-intensive streaming HD video
applications is imperative.
The Ruckus T710 802.11ac Wi-Fi AP incorporates patented technologies found only in
the Ruckus Wi-Fi portfolio.
Extended coverage with patented BeamFlex+ utilizing multi-directional antenna
patterns.
Improve throughput with ChannelFly, which dynamically nds less congested Wi-
Fi channels to use.
With 802.11ac Multi-User MIMO (MU-MIMO) support, the T710 can simultaneously transmit to multiple MU-MIMO capable devices, drastically improving RF eciency and overall throughput for even non-Wave 2 clients.
The T710 is also designed with an SFP ber interface that enables seamless
connectivity to a ber backhaul.
Whether you’re deploying ten or ten thousand APs, the T710 is also easy to manage through Ruckus’ appliance, virtual and cloud management options.
BeamFlex Adaptive Antenna Technology
MORE THAN WI-FI
Enhance your network with Cloudpath™ security and management software, SPoT™ real-time Wi-Fi location engine and analytics software, and SCI network analyt-
ics.
© 2017 RUCKUS WIRELESS, INC. COMPANY PROPRIETARY INFORMATION
T710
Outdoor 802.11ac Wave 2 4x4:4 Wi-Fi Access Point
Blinding fast Wave 2 4x4:4 802.11ac with MU-MIMO
vSmartZone
(9.5 cm)
Flexible Architecture
Smart Mesh
(24.1 cm)
(31.7 cm)
DATA SHEET
DATA SHEET
FEATURES
WIRELESS
802.11ac 802.11ac Wave 2 Multi-User MIMO (MU-MIMO)
Concurrent dual-band (5GHz/2.4GHz) support
2,533Mbps maximum PHY rate (1733 Mbps in 5GHz; 800Mbps in
2.4GHz) BeamFlex+ (PD-MRC) smart antenna, with support for 4,000+
unique antenna patterns enables up to 5dB of additional gain and up to 15dB of additional interference mitigation
802.11ac standard Tx Beamforming
Antenna options: omni-directional and 120x30 degrees sector
Unmatched Rx sensitivity down to -104dBm
Improved Maximum Ratio Combining (MRC) for best-in-class re-
ceive sensitivity
Space Time Block Coding for increased handset performance
Low Density Parity Check (LDPC) for increased data throughput at all
ranges
256-QAM support on 5GHz and 2.4GHz
Admission control/load balancing*
Band balancing
Up to 16 BSSIDs per radio with unique QoS and security policies*
Backward compatible with legacy 802.11 clients
Dedicated dual band RF monitor enabling enhanced performance
while providing Zero-Wait DFS capability
IP 67 rated, -40°C to +65°C
WPA-PSK (AES), 802.1X support for RADIUS and AD*
Integrated GPS for location applications
INTERFACES
2 x 1GbE ports
Support for LACP (Link Aggregation Control Protocol) to maximize
the backhaul bandwidth using both Ethernet ports SFP Fiber Interface providing exibility to backhaul to ber
POWER
AC power input (100-250 Vac, 50/60 Hz)
802.3at (PoE+) PoE Input mode of operation
802.3at PoE Output Power Sourcing Equipment (PSE) mode of
operation, useful for daisy chaining and powering an additional Mesh AP or another device like an IP Surveillance Camera
SOFTWARE
SPoT™ Real-time location engine and analytics software
Cloudpath™ Security and management software
SmartCell Insight (Networks analytics engine)
Secure image download – enhancing platform security
Multicast IP video streaming support
Dynamic PSK*
Captive portal and guest accounts *
* when used with management.
© 2016 RUCKUS WIRELESS, INC. COMPANY PROPRIETARY INFORMATION
© 2017 RUCKUS WIRELESS, INC. COMPANY PROPRIETARY INFORMATION
Loading...
+ 2 hidden pages