
BENEFITS
data sheet
Best-in-class performance at lowest cost
Unprecedented price/performance with extended
range at the industry’s most affordable price point
Extended range requires fewer APs
Adaptive antenna technology delivers a 2x to 4x
increase in Wi-Fi signal coverage minimizing the
number of APs required to service any area
Sleek, low prole enclosure for ease-of-deployment
Aesthetically-pleasing design ts almost anywhere
Channel selection optimizes throughput
ChannelFly dynamic management, based on throughput
measurements, not just interference, chooses the best
channel to give users the highest throughput
Super simple conguration and management
The industry’s simplest conguration and
management through a Web-based wizard and
automated deployment capabilities
Flexible deployment options
Standalone or controller-based deployment
Hassle free migration to higher speed Wi-Fi
Support for standard 802.3af power over Ethernet
allows enterprises to use existing PoE switches
without costly upgrades
ZoneFlex™ R300
DUAL-BAND 802.11N
SMART WI-FI ACCESS POINTS
High Performance, 802.11n Smart Wi-Fi Access Points
with Adaptive Antenna Technology
The Ruckus ZoneFlex R300 delivers high-performance and reliable
802.11n wireless networking at the industry’s most affordable price
point.
Unlike any other 802.11n wireless solution in its class, the ZoneFlex
R300 combines patented adaptive antenna technology and
automatic interference mitigation to deliver consistent, predictable
performance at extended ranges with up to an additional 4dB of
BeamFlex gain on top of the physical antenna gain and up to 10dB
of interference mitigation.
Additional performance enhancements to signal gain can be
attributed to the chip-based transmit beamforming capability
adding 3 dB when associated to a compatible client.
Each ZoneFlex R300 integrates Ruckus-patented BeamFlex, a
software-controlled, high gain antenna array that continually forms
and directs each 802.11n packet over the best performing signal
path. The ZoneFlex R300 automatically selects channels for highest
throughput potential using Ruckus ChannelFly dynamic channel
management, adapting to environmental changes. Once deployed,
enterprises never have to worry about constant site surveys as the
environment changes.

ZoneFlex™ R300
DUAL-BAND 802.11N
SMART WI-FI ACCESS POINTS
Patented BeamFlex™ Technology Extends Signal Range,
Improves Stability of Client Connections
All ZoneFlex R300 Smart Wi-Fi access points integrate a
software-controlled smart antenna array that delivers up to an
additional 4 dB of BeamFlex gain and 10 dB of interference
mitigation. This allows a 2 to 4x improvement in signal range
and a reduction in packet loss from the ability to automatically
mitigate interference and avoid obstacles.
Advanced WLAN Applications with Smart/OS
When used with the Ruckus ZoneDirector Smart
WLAN controller, each ZoneFlex R300 supports
a wide range of value-added applications such
as guest networking, Dynamic PSK, hotspot
authentication, wireless intrusion detection and
many more. With Smart/OS, WLANs can be
created and mapped to the same or different APs
or VLANs. In a centrally managed conguration, the ZoneFlex
R300 works with a wide range of authentication servers including
Microsoft’s Active Directory, LDAP, and RADIUS.
Flexible Deployment Options
ZoneFlex R300 APs can be deployed as a standalone AP or
as part of a centrally managed wireless LAN using ZoneDirector Smart WLAN controllers. ZoneFlex R300 can be deployed
across any L2/L3 network and can bridge trafc onto the local
network, tunnel to a central location using L2TP or PPPoE, or
route between the WAN and NAT’ed private subnets. When
used with the ZoneDirector, each ZoneFlex R300 is automatically
congured through the network making deployment quick and
ea sy.
Complete Local and Remote Management
Each ZoneFlex R300 can be managed as a standalone AP
through a Web-based GUI,
using SNMP or through the
Ruckus FlexMaster Wi-Fi
remote management system.
Local management can also be
performed using the ZoneDirector Smart WLAN controller. FlexMaster
is a LINUX-based software platform
that uses industry-standard protocols
to perform bulk conguration, fault
detection, monitoring and a wide range
of troubleshooting capabilities over a
wire area connection. The ZoneDirector
enables local management and control
of APs, adding value-added services
such as transmit power control, and guest networking.
FEATURES
• Dual-band concurrent (5GHz/2.4GHz)
• Adaptive antenna technology and advanced RF management
• Up to an additional 4dB BeamFlex gain / 10dB interference
mitigation
• Automatic interference mitigation, optimized for high-density
environments
• Integrated smart antenna technology
• Standard 802.3af Power over Ethernet (PoE)
• Router mode with NAT and DHCP ser vices
• 2 to 4 times extended range and coverage
• IP multicast video streaming support
• Up to 27 BSSIDs per radio with unique QoS and security policies
• Advanced QoS packet classication and automatic priority for
latency-sensitive trafc
• Dynamic, pre-user rate-limiting for hotspot WLANs
• WPA-PSK (AES), 802.1X support for RADIUS and Active
Directory**
• Ethernet 802.1x port-based authentication (authenticator and
supplicant)
• Zero-IT and Dynamic PSK**
• Admission control/load balancing**
• Bandsteering and airtime fairness
• Captive portal and guest accounts **
• Wall, desktop or ceiling mountable
• Limited lifetime warranty
** when used with management
page 2

Specications
PHYSICAL CHARACTERISTICS
POWER • DC Input: 12 VDC 1.0A
• Power over Ethernet 802.3 af
PHYSICAL SIZE • 13cm (L), 13cm (W), 2.8cm (H)
• 5.1 in (L), 5.1 in (W), 1.1 in (H)
WEIGHT • 215g (0.474 lbs.)
ETHERNET PORTS • 1 auto MDX, auto-sensing
LOCK OPTIONS • Hidden latching mechanism
10/10 0/10 00 Mbp s, RJ-4 5,
POE port
• Kensington Lock Hole
• T-ba r To rx
ENVIRONMENTAL
CONDITIONS
POWER DRAW • DC Input
• Operating Temperature: 0°C - 40°C
• Operating Humidity: 10% - 95%
non-condensing
• Idle: 1. 6W
• Ty pi ca l: 3.6W
• Peak: 8.4W
• Power over Ethernet Input
• Idle: 3.4W
• Ty pi ca l: 5.3W
• Pe ak: 9.7W
PERFORMANCE AND CAPACITY
MAX PHY RATE • 300 Mbps / radio
CONCURRENT STATIONS • Up to 256 clients per AP
SIMULTANEOUS VoIP CLIENTS • Up to 30
RF
ANTENNA • Adaptive antenna that provides up
to 128 unique antenna patterns
• 64 patterns per band
RF POWER OUTPUT
(Aggregated)
PHYSICAL ANTENNA GAIN • Up to 3 dBi per spatial stream
BEAMFLEX* SINR TX GAIN • Up to 4 dB
INTERFERENCE MITIGATION • Up to 10 dB
MINIMUM RX SENSITIVITY • Up to -101 dBm
* BeamFlex gains are statistical system level effects translated to enhanced
SINR based on observations over time in real-world conditions with multiple
APs and many clients
MANAGEMENT
DEPLOYMENT OPTIONS • Standalone (individually managed)
• 26 dBm for 2.4GHz†
• 24 dBm for 5GHz†
• Managed by ZoneDirector (9.8.1 & above)
• Managed by FlexMaster
• Managed by SmartCell™
Gateway 200 (2.5.1 & above)
CONFIGURATION • Web User Interface (HT TP/S)
• CLI (Telnet/SSH), SNMP v1, 2, 3
• TR-069 vis FlexMaster
AUTO AP SOFTWARE UPDATES • FTP or TFTP, remote auto available
WI-FI
STANDARDS • I EEE 802 .11a /b /g/n
• 2.4GHz and 5GHz
SUPPORTED
DATA R ATES
• 802.11n: 6.5Mbps – 130Mbps (20MHz)
6.5Mbps – 300Mbps (40MHz)
• 802.11a: 54, 48, 36, 24, 18, 12, 9 and 6Mbps
• 802.11b: 11, 5.5, 2 and 1 Mbps
• 802.11g: 54, 48, 36, 24, 18, 12, 9 and 6 Mbps
RADIO CHAINS • 2 x 2
SPATIAL STREAMS • 2
CHANNELIZATION • 20MHz and/or 40MHz
FREQUENCY BAND • IEEE 802.11 b/g/n: 2.4 – 2.484 GHz
• IEEE 802.11a/n: 5.15 – 5.25 GHz; 5.25 – 5.35
GHz; 5.47 – 5.725 GHz; 5.725 – 5.85 GHz
OPERATING
CHANNELS
• US/Canada: 1-11, Europe ( ETSI X30): 1-13,
Ja pan X41: 1-13
• 5 GHz channels: Country dependent
BSSID • Up to 27 user congurable
POWER SAVE • Supported
WIRELESS SECURITY • WPA-PSK, WPA-TKIP, WPA2
AES , 8 02.11i
• Authentication via 802.1X with the
ZoneDirector, local authentication database,
support for RADIUS, LDAP, and
ActiveDirectory
CERTIFICATIONS** • U.S., Europe, Australia, Brazil, Canada,
Chile, China, Colombia, Costa Rica, Hong
Kong, India, Indonesia, Israel, Japan, Korea,
Malaysia, Mexico, New Zealand, Peru,
Philippines, Saudi Arabia, Singapore, South
Africa, Taiwan, Thailand, UAE, Vietnam
• WEEE/RoHS compliance
• EN-60601-1-2 (Medical)
• Wi-Fi Alliance
• EN 50121-1 Railway EMC
• EN 50121-4 Railway Immunity
• IEC 61373 Railway Shock & Vibration
† Maximum power varies by country
** For current certication status please see price list
Product Ordering Information
MODEL DESCRIPTION
ZoneFlex R300 Smart Wi-Fi 802.11n Access Point
901-R30 0-X XY Y Concurrent dual band 802.11n AP, no power adapter
Optional Accessories
902-0173-XXYY Power Adapter, AC/DC wall plug,100-240Vac
902-0162-XX YY PoE injector (sold in quantities of 10 or 100); (X X
PLEASE NOTE: When ordering ZoneFlex Indoor APs, you must specify the
destination region by indicating -US or -WW instead of XX.
50/60Hz (XX can be US, EU, AR, AU, BR, CN, IN,
KR, SA, UK, UN)
can be US, EU, UK, AU, CH, or IN)
Copyright © 2015, Ruckus W ireless, Inc. A ll rights reser ved. Ruckus W ireless and Ruc kus Wireless de sign
are registered in the U.S. P atent and Trademark O ffice. Ruc kus Wireless, t he Ruckus Wirel ess logo, Beam Flex,
ZoneFlex, MediaFlex , FlexMaster, Zone Director, Speed Flex, Smart Cast, and Dy namic PSK are t rademarks of
Ruckus W ireless, Inc. in t he United States and other cou ntries. All other trademark s mentioned in thi s document
or websit e are the proper ty of their resp ective owner s. September 2015
www.ruckuswireless.com