
BENEFITS
data sheet
Dual band concurrent operation
Industry’s rst 2.4 GHz and 5.0 GHz concurrent wall
switch allows for efcient meshing while streaming
multiple applications simultaneously
Gigabit uplink
Maximizes the network capability to ensure seamless
multi-client streaming connectivity
Ubiquitous connectivity for converged IP services
Multiple SSIDs, port-based VLANs and robust
authentication options make the ZoneFlex 7055 ideal
for supporting concurrent IP-based services such as
VoIP, IPTV, high-speed Internet access and in-room
device connectivity
Flexible deployment options
The ZoneFlex 7055 requires a single POE cable drop,
reducing cabling, switch ports and power sourcing
equipment or power adapter
Easy installation
Installs into any standard network wall jack, offering
two Ethernet uplink options: RJ-45 connector and a
110 punch down block
Wall mounted, inconspicuous compact form factor
for best aesthetics with universal form factor
Low prole design and front port access eliminates
unsightly cabling and disruptive furniture placement
ZoneFlex™ 7055
MULTIPURPOSE DUAL BAND CONCURRENT
80 2.11n WIRED/WIRELESS WALL SWITCH
High Performance 2x2:2 Integrated Wired/Wireless Wall Switch
The Ruckus ZoneFlex 7055 is the industry’s rst dual band concurrent
wired and wireless wall switch that integrates high-speed 802.11n Wi-Fi
into an ultra-sleek, low-prole design that can be quickly and discretely
installed in a standard wall junction box.
Ideal for offering converged services within hotel guest rooms and
university dormitories, the ZoneFlex 7055 provides an easy way to offer
multiple connections into a single room without multiple cables.
The ZoneFlex 7055 delivers high performance 2.4 GHz and 5 GHz 802.11n
wireless coverage and four wired Ethernet access connections that can
be used to support a range of in-room IP device and user connectivity
options. An additional pass-through port allows connectivity for digital
phones that requires native access to an in-house PBX system.
An IEEE 802.3af-compliant POE port, up to 6.5 watts, powers devices
such as IP telephones directly from the wall switch (with 802.3at input can
output 13W). The ZoneFlex 7055 requires only a single POE cable drop
thereby reducing cabling, switch ports, and power sourcing equipment.
The ZoneFlex Wi-Fi Wall Switch is completely inconspicuous, minimizing
the protrusion off the wall to make in-room cabling and furniture
arrangement simple. Flexible deployment options allow the ZoneFlex 7055
to be easily installed via two uplink Ethernet options: an RJ-45 Ethernet
jack or a 110 punch down block connection.
Integrated POE support eliminates more wires
Provides POE out to power devices such as IP-based
VoIP phones eliminating the need for more power
chords that clutter the environment
Plug and play for existing digital phones
Passthrough port allows native connectivity for existing
digital phones or others
The ZoneFlex 7055 can be deployed as a standalone device or centrally
managed by the Ruckus ZoneDirector or FlexMaster Wi-Fi system
management platform.
With the ability to broadcast up to 8 SSIDs per radio, the ZoneFlex 7055
supports port-based VL ANs. Authentication options include: 802.1x,
MAC-based, captive portal, LDAP, RADIUS, Active Directory and through
an internal user database.

ZoneFlex™ 7055
MULTIPURPOSE DUAL BAND
CONCURRENT 802.11n WIRED/
WIRELESS WALL SWITCH
FEATURES
• Integrated 2x2:2 600 Mbps Wi-Fi AP and Ethernet wall switch
• Dual band 11n Wi-Fi and four Ethernet access ports offers
HSIA with a Gigabit Ethernet uplink
• Wi-Fi Redundancy, in-room coverage
30 mm
136 mm
Digital PBX
Pass Through
136 mm
• Powered by either POE or 48 VDC
• Supplies POE power 6.5W or 13W
• SmartCast QoS
• 8 BSSIDs per radio with unique QoS and security policies
• WEP, WPA-PSK, WPA-TKIP, WPA2 AES, 802.11i
• 802.1X support for RADIUS and Active Directory*
• Zero-IT and Dynamic PSK*
• Captive portal and guest accounts*
• Mounts into standard US and EU single gang wall jack
• RJ-45 or 110 punch down block options for uplink
Ethernet port
• One RJ-45 pass-through connection
page 2
POE Uplink Port
POE In Por t
in 110 Punch
Down Block
• Universal form factor
• SmartMesh capable
• Torx screws to secure AP and provide security against
opportunistic theft or tampering
* with ZoneDirector

Specications
PHYSICAL CHARACTERISTICS
POWER • POE 802.3af/802.3at
• 48VDC input
POWER DRAW
PHYSICAL SIZE • 13.6 cm x 13.6 cm (Square), 3 cm
WEIGHT
PHYSICAL PORTS
ENVIRONMENTAL
CONDITIONS
RF
PHYSICAL ANTENNA GAIN • 2 dBi (2.4 GHz); 3 dBi (5.0 GHz)
MINIMUM RX SENSITIVITY
PERFORMANCE AND CAPACITY
CONCURRENT USERS • Up to 100
VOICE CALLS
APPLICATIONS
HOTSPOT • WISPr
VOICE
NETWORK ARCHITECTURE
IP • IPv4, IPv6, dual-stack
VLANs • 802.1Q (1 per BSSID or dynamic,
802.1X FOR ETHERNET PORTS
TUNNELING
• POE: Idle (3.6 w); Typical (4.5 w);
Peak (6.5 w)
• DC-Powered: Idle (3.8 w);
Typical (4.7 w); Peak (6.7 w)
(Deep)
• NEMA 1 Type 1 / IP 20
• 292 g (.64 Lbs.)
• 392 g (.86 Lbs.) with bracket
• 4 10/100 Mbps Base-T 802.3,
802.3u, RJ-45 Ethernet
access ports.
• 1 10 /100/1000 Mpbs Base-T 802.3,
802.3u, 802.3ab, 802.3af (802.3at
Type 1) PoE input, Class 3. RJ-45
and punch down connector
• 1 RJ-45 pass-through port; RJ45
to RJ45
• Operating Temperature:
32°F (0°C) - 122°F (50°C)
• Operating Humidity: 15% - 95%
non-condensing
• Up to -90 dBm
• Up to 30
• 8 0 2.11 e/ W MM
• U-APSD
per user based on RADIUS)
• Port-b ase d
• Authenticator
• Supplicant
• L2TP, PPPoE
MULTIMEDIA AND QUALITY OF SERVICE
802.11e/WMM • Supported
SOFTWARE QUEUES
TRAFFIC CLASSIFICATION
RATE LIMITING
MANAGEMENT
DEPLOYMENT OPTIONS • Standalone (individually managed)
• Per traf c type (4), per client
• Automatic, heuristics and TOS
based or VLAN-dened
• Dynamic, per-user or per-WLAN
• Managed by ZoneDirector
• Managed by FlexMaster
CONFIGURATION • Web User Interface (HTTP/S)
• CLI (Telnet/SSH), SNMP v1, 2, 3
• TR-069 vis FlexMaster
AUTO AP SOFTWARE UPDATES
WI-FI
STANDARDS • I EEE 8 02.11a /b /g/n
• FTP or TFTP, remote auto available
• Dual band (2.4 GHz and 5 GHz)
concurrent operation
RADIO CHAINS • 2 x 2
SPATIAL STREAMS
RF POWER OUTPUT
(Aggregate)
FREQUENCY BAND
• 2
• 2.4 GHz: 22 dBm
• 5.0 GHz: 19 dBm*
• 802.11b/g/n: 2.4-2.484 GHz
• 8 0 2.11 a /n: 5.15 -5 .25 GH z;
5.25-5.35 GHz; 5.47-5.725 GHz
OPERATING CHANNELS
• US/Canada: 1-11
• EU (ETSI X30): 1-13
• Channel availability is country
dependent according to the local
regulations
• 5 GHz Channels
BSSID
WIRELESS SECURITY
• 8 BSSIDs per radio
• WEP, WPA-PSK, WPA-TKIP, WPA2
AES, 8 0 2.11 i
• Authentication via 802.1X with
ZoneDirector, local authentication
database, support for RADIUS,
LDAP, and Active Directory
* Maximum power varies by country
**See price list for latest country certications
Product Ordering Information
MODEL DESCRIPTION
ZoneFlex 7055 Wi-Fi Wall Switch
901-7055-XX01 Dual band Wi-Fi Wall Switch
Optional Accessories
902-0170-XX10 Power Supply (Qty. 10)
902-0111-0000 Adjacent wall plate jacket
PLEAS E NOTE: When ordering you must specify the destination region
by indicating -US, -CN, or -WW instead of XX.
WARRANTY: Sold with a limited lifetime warranty.
For details see: http://support.ruckuswireless.com/warranty
Copyright © 2015, Rucku s Wireless, I nc. All right s reserve d. Ruckus Wir eless and Ruc kus Wireles s design
are registered in the U.S . Patent and Trade mark Offi ce. Ruckus W ireless, the R uckus Wireless logo, Be amFlex,
ZoneFlex, MediaF lex, MetroFlex, FlexM aster, ZoneDi rector, Speed Flex, Smar tCast, a nd Dynamic P SK are
tradema rks of Rucku s Wireless, I nc. in the Unit ed States an d other count ries. All oth er trademar ks mentione d in
this docu ment or websit e are the prope rty of their respecti ve owners. Oc tober 2015
Ruckus Wireless, Inc.
350 West Java Drive
Sunnyvale, CA 94089 USA
(650) 265-4200 Ph \ (408) 738-2065 Fx
www.ruckuswireless.com