Ruby Tech RP-1000 User Manual

RUB

Networking & Communications

TECHTECH

RP-1000

R

Gigabit Switch

Redundant Power for FGS-2924R

Gigabit Switch

RP-1000:

2-Slot Redundant Power System

Key FeaturesKey Features

Supports device status detect Signal

for managed switch system:

---Power A,B position

---Power On/Off status

---DC-DC or AC-DC input Power

---Power module inserted or removed

---+5V output voltage status

---Power A,B FAN RPM status

---Case temperature detect

---Device Name RP-1000 read/write

(write protection)

---S/N Number read/write (write

protection)

---HW/ME Version read/write (write

protection)

Supports I2C interface for device

status detect

AC power input 100V ~ 240V, 47-63Hz

or DC power input 36 ~ 72V

Up to +5V/16A 80W power output with

10 pin Mini-Fit 4.2 connector

Redundant power supply to prevent
system failure, if one fails, the
redundant power supply is capable
of taking over immediately (Load­ sharing).

System LEDs

---Power (RP-1000 Power A or B or

FGS-2924R internal AC Power ON),

---Power A (+5V Good),

---Power B (+5V Good)

OverviewOverview

The RP-1000 External Redundancy Power
Supply is designed as a power supply that
can supply backup power to so equipped
RubyTech FGS-2924R. It has 2 redundant
power supply (RPS) ports supporting
backup power to 2 supported RubyTech
FGS-2924R switches. User can detect
RP-1000 status (Power A,B , Power
insert/remove , DC or AC Power, FAN
RPM , Temperature, Device Name, S/N
Number) by the managed Switch's web UI.
Moreover, a redundant power supply is
offered in the power supply set to cope with
any accidental breakdown of power supply.

Ruby Tech Corp.

3F, No.1, Lane 50, Nan Kang Road, Sec.3, Taipei, Taiwan http://www.rubytech.com.tw
TEL:[phone] FAX:[phone] E-mail [e-mail]

2008-08.04-Version A

Technical information listed is subject to change without prior notice. All brand names and trademarks are property of their respective owners.

Technical Specifications

Diagnostic LED: Power A, Power B, Power
Power Requirement:

AC Power Module Input 100-240VAC, 50-60Hz
DC Power Module Input 48VDC
Consumption 80W
Slot Power Plug Output +5V/16A
Ambient Temperature 0 to 40 C
Storage Temperature -20 C to 70 C
Humidity 5% to 90%
Dimensions 440(W) x 211.2 (D) x 44 (H) mm

Complies with FCC Part 15 Class A & CE Mark Approval
LED Description

LED Color Function

Power A Green Lit when Power Module A +5V output is coming up.
Power B Green Lit when Power Module B +5V output is coming up.
Power Green Lit when RP-1000 Power A or B or FGS-2924R
internal AC Power ON.

Ordering InformationOrdering Information

Model Description

RP-1000RAC RP-1000 with Dual AC Input Redundant Power Supply
RP-1000RDC RP-1000 with Dual DC Input Redundant Power Supply
RP-1000RADC RP-1000 with AC+DC Input Redundant Power Supply

Application:Application:

Copyright c 2008 Ruby Tech Corp. All rights reserved.