Ruby Tech IES-2310C User Manual

Industrial Ethernet

R

RUB

Networking & Communications

TECHTECH

Industrial Ethernet

Fast Ethernet Switch

IES-2310C

IES-2310C: Industrial 8-Port L2 Managed Fast Ethernet Switch + 2 TP/SFP Gigabit Dual Media

Key FeaturesKey Features

8-Port 10/100BaseT(X), 2-Port 1000

BaseTX/FX(SFP)(MM/SM, LC/BiDi)

Support IEEE802.3/802.3ab/802.3ad/

802.3u/802.3x/802.3z/802.1d/802.1p/

802.1q/802.1w
Support SNMP, RMON,IGMP,LACP,

GVRP,GARP,STP,RSTP,

R-Ring (Recover Time < 300ms) for

Ethernet Redundancy

Power Input: 24VDC (18~48V)

-10 C to 60 C operating temperature

DIN-Rail mounting ability
Alarm contact

OverviewOverview

IES-2310C is an industrial Managed Fast
Ethernet switch that supports SNMP, Web
UI and CLI management interface and with
8 10/100Base-TX (RJ-45 connectors) and
2 Gigabit dual media (RJ-45/SFP) ports. It
is a standard switch that meets all IEEE

802.3/u/x/z Gigabit, Fast Ethernet

specifications. In addition, the switch
implements the QoS (Quality of Service),
VLAN, Mac Filtering Policy, Port Mirror,
VLAN and full L2 protocols. It has a rich
feature set suitable for streaming VoIP,
video, and data traffics for multimedia
applications.

Moreover, for industrial automation
application, redundancy is an important
issue to ensure the network reliability,
IES-2310C provides R-Ring technology
to enable self-recover time in less than
300ms.

In this switch, Port 9, 10 support two
types of media --- TP and SFP Fiber
(LC, BiDi-LC...); both ports support
10/100/1000Mbps TP or 1000Mbps SFP
Fiber with auto-detected function.
1000Mbps SFP Fiber transceiver is used
for high-speed connection expansion.

Technical SpecificationsTechnical Specifications

Standard compliance

---IEEE 802.3 10Base-T

---IEEE 802.3u 100Base-TX

---IEEE 802.3x Flow Control Capability

---IEEE 802.3z 1000Base-X Ethernet

---IEEE 802.3ab 1000Base-TX

---ANSI/IEEE 802.3 Auto-negotiation

---IEEE 802.1q VLAN

---IEEE 802.1d Spanning Tree Protocol.

---IEEE 802.1w Rapid Spanning Trees

---IEEE 802.1x port-based network access control

---IEEE802.1p Class of Service

Subscriber Interface

---1-8 10/100Mbps Fast Ethernet ports.

---Port 9 and 10 are Gigabit TP/SFP Fiber auto sense

---Auto-Negotiation and Auto-MDIX

---Back pressure flow control for half duplex.

---Connector: 8 RJ-45 and 2 dual media, RJ-45/SFP

Performance

Switching capacity:

---Non-blocking switch fabric supports up to 8FE + 2GbE ports

8 K MAC addresses---
256K packet buffer and 128K control memory---

VSM(Virtual Stacking Management)

---Supports 16 devices stacking

Multiple switches can be managed via one IP address, just like software ---

stacking

VLAN

---Supports SVL/IVL configuration to meet your VLAN requirement

Port-base VLAN---
IEEE802.1q tag-base VLAN, 4094 max, up to 256 active VLANs including ---

static plus dynamic entry

Flooding unknown VLAN frame setting, can flood packet with some VLAN---

tag associated to a invalid/inactive VLAN

In tag-base VLAN, supports egress/ingress packet filter---
Q-in-Q is an efficient method for enabling Subscriber Aggregation---

QoS

---Port Based (VIP Port), 802.1p , TOS and DiffServ.(IPv4/IPv6) based QoS

packet classification

---Supports four level priority queues to prioritize in-bound and out-bound

traffic

---Supports two scheduling, WRR and Strict

---Supports priority in a Q-in-Q tag

Industrial Ethernet

R

RUB

Networking & Communications

TECHTECH

Industrial Ethernet

Fast Ethernet Switch

Bandwidth Control

---Supports bandwidth rating per port ingress and egress rate limit with

1Mbps increment

Broadcast Storm

---Multicast/Broadcast/Unknown-Unicast Storm suppression.
Transmission Mode

---10/100Mbps support full or half duplex

Transmission Speed

---10/100Mbps for TP and 100Mbps for Fiber

Port Mirroring

---Support 1: N RX port mirroring

---Supports port sniffer function with 3 modes:(TX Monitor Mode, RX Monitor Mode and TX-RX pair Monitor Mode)

Redundant Ethernet Ring Capability (Recover time <300ms)

Protocol

LACP

---2 Fast Ethernet +1 100BaseFX groups

---Per-group max 4 member

---Provides DA, SA and DA+SA Mac-based trunking with automatic link fail-over GVRP/GARP

GVRP/GARP

---802.1q with GVRP/ GARP

Multicasting

---Supports IGMP snooping including active and passive mode

STP/RSTP

---802.1d/1w

Network Security

---802.1x access control

---Isolated group, to allow certain ports being designated as protected

Restricted group, to decide the direction of transmitting packets for specific ports.---

---Management Access Policy Control

---Static Mac, to limit which Mac addresses can pass through or not

---Mac addresses learning limit, to set up the maximum amount of Mac that each port can learn

Snmpv1,v2c Network Management

RFC 1213 MIB (MIB-II) RFC 1757 RMON MIB

---Interface MIB ---Statistics Group 1

---Address Translation MIB ---History Group 2

---IP MIB ---Alarm Group 3

---ICMP MIB ---Event Group 9

---TCP MIB RFC 1493 Bridge MIB

---UDP MIB RFC 1643 Ethernet MIB

---SNMP MIB Enterprise MIB

LED Description

LED

Global POWER

Global CPU

Port 1-8 10/100M TP LINK/ACT/SPD, FDX/COL

Port 9,10 1000M TP/SFP LINK/ACT/SPD, SFP LINK

Network Interface:

Category Connector Transmission Max. Cable Length Wavelength

1000-T RJ-45 Full Duplex 100M /

1000-SX(M-M) LC(SFP) Full Duplex 220M 850nm

50/125

1000-SX(S-M) LC(SFP) Full Duplex 10km 1310nm

9/125