Ruby Tech GS-5116C User Manual

RUB
TECHTECH
GS-5116C
Gigabit Switch
Unmanaged Switch
Gigabit Switch
GS-5116C:
16-Port Unmanaged Gigabit Ethernet Switch
Key FeaturesKey Features
16-Port 10/100/1000 Mbps GbE Switch
Provides two Gigabit Ethernet Modules options: 1000Mbps RJ-45/1000Mbps Fiber SFP (single-mode/multi-mode) for remote uplink
802.3ab 1000BASE-T and IEEE 802.3x flow control standards
Supports 10/100Mbps auto-detect half/ full duplex and 1000Mbps at full duplex
Supports TP interface auto MDI/MDI-X function for auto TX/RX swap
Supports 802.3x flow control pause packet for full duplex
LEDs to indicate: 10/100/1000Mbps, Link/Act. and Power Status
Slim & Compact design
RoHS Compliance
Overview
GS-5116C is a cost-effective switch that meets all IEEE 802.3/u/x/z Gigabit, Fast Ethernet specifications. With 32 Gbps switch fabric, the switch improves your network performance. You can connect to backbone or make Gigabit to the PC to perform high speed transfer. The switch has a 8K MAC Address Table and provides a 272K on-chip buffer. It is suitable for workgroups or WAN edge application. The versatile and compact 1RU height design of the GS-5116C enables the device to be rackmounted in a standard 19 inch rack, while conserving valuable rack space.
Easy Installation and Configuration
GS-5116C conforms to plug and play for easy installation and use. With diagnostic LEDs, network and port status can be easily monitoring and trouble-shooting. GS-5116C also build in wiring crossover on all ports allows connection to server or PC without worrying about cabling.
Technical SpecificationsTechnical Specifications
Standard compliance:
IEEE 802.3 10Base-T Ethernet(twisted-pair copper)
IEEE 802.3u 100Base-TX Ethernet(twisted-pair copper) IEEE 802.3ab 1000Base-T Ethernet(twisted-pair copper) IEEE 802.3Z 1000Base-T Ethernet(Gigabit Fiber) ANSI/IEEE 802.3 Auto-negotiation
MAC Address: 8K Network Interface: 16 10/100/1000Mbps RJ-45 ports Flow control:
IEEE802.3x compliant for full-duplex
Back pressure flow control for half-duplex
Media :
10BASE-T: UTP Cat. 3, 4, 5 or up
100BASE-TX: UTP Cat. 5 or up 1000BASE-T: UTP Cat. 5 or up
Transmission Mode: 10/100Mbps, full/half-duplex (Auto-sensing) Transfer Rate:
10Mbps: 14880pps (64 Bytes Package)
100Mbps: 148800pps (64 Bytes Package) 1000Mbps: 1488000pps (64 Bytes Package)
Buffer Memory: 272KB on chip frame buffer Switching Method: Store & forward
LED Description
LED Color Function
Global POWER Green Lit when +5V power is coming up Global CPU/ Green Blinks when CPU is activity ACT Port LINK/ Green Lit when connection with remote device 1-16 ACT is good Blinks when any traffic is present Port 1000/ Green/ Lit Green when TP link on 1000Mbps 1-16 100Mbps Amber speed Lit Amber when TP link on 100Mbps speed Off when 10Mbps or no link occur
RUB
TECHTECH
Gigabit Switch
Unmanaged Switch
Gigabit Switch
Hardware Spec.
Packing InformationPacking Information
Ordering InformationOrdering Information
GS-5116C 16-Port Unmanaged Gigabit Ethernet Switch with 2 SFP Dual Media Port
Optional SFP Module SFP.LC 1000Base-SX GE SFP Fiber Module, LC Multi-Mode 850nm SFP.LC.M2 1000Base-SX GE SFP Fiber Module, LC Multi-Mode 1310nm 2km
Feature Detailed Description
Voltage 100~240 V
Frequency 50~60 Hz Consumption 30W Ambient Temperature 0 to 40 C
Humidity 5% to 90% Dimensions 44(H) x 442(W) x 209(D) mm
Weight 3kg
Safety UL
Comply with FCC Part 15 Class A & CE Mark Approval
Carton Dimensions (mm) pcs/Carton N.W (KG) G.W (KG)
530x512x345 5 20 21
Note: We recommend the SFP transceiver from the following vendors:
1. Ruby Tech Corporation
2. Agilient Technologies
3. AVAGO Technologies
4. Finisar Corporation
Ruby Tech Corp.
3F, No.1, Lane 50, Nan Kang Road, Sec.3, Taipei, Taiwan http://www.rubytech.com.tw TEL:886-2-2785-3961 FAX:886-2-2786-3012 E-mail rubytech@mail.rubytech.com.tw
2008-07.25 Version A
Technical information listed is subject to change without prior notice. All brand names and trademarks are property of their respective owners.
Copyright c 2008 Ruby Tech Corp. All rights reserved.
Loading...