Ruby Tech GS-1208M User Manual

RUB
TECHTECH
GS-1208M
Gigabit Switch
Web Smart Switch
Gigabit Switch
GS-1208M: 8-Port Web-Smart Gigabit Ethernet Switch
Key FeaturesKey Features
Standard Compliance
---IEEE 802.3 10Base-T Ethernet
(twisted-pair copper)
---IEEE 802.3u 100Base-TX Ethernet (twisted-pair copper)
---IEEE 802.3ab 1000Base-T Ethernet (twisted-pair copper)
---ANSI/IEEE 802.3 Auto-negotiation
---8 Gigabit Ethernet ports
---Auto-negotiation
---Provide the double tagging feature, which is useful for ISP application.
---Provide the loop detection feature for unmanaged environments.
---Supports TP interface auto MDI/MDI­ X function for auto TX/RX swap
---Supports 802.3x flow control pause packet for full-duplex
---Provide these packets are longer than 1518 bytes, but shorter than 9728 bytes that is suitable for multimedia application.
---Back pressure flow control for half­ duplex
---Supports 10/100Mbps auto-detect half/full duplex and 1000Mbps at full duplex
---Connector: 8 RJ-45 ports
Performance
Switching capacity:
---8 Gigabit Ethernet ports with non-
blocking wire-speed performance
---Provide 4 K entry MAC addresses
---128 KB on-chip frame buffer
VLAN
---Port-base VLAN
---IEEE802.1q tag-base VLAN, 4094
max
---up to 8 active VLAN
QoS
---Supports IPv4/v6, Mac, Port, Diffserv and 802.1p QoS with four level priority queue
BenefitsBenefits
QoS with Four Priority Queues
The QoS(Quality Of Service) feature provides four internal queues to support
four different classifications of traffic. High priority packet streams experience less delay inside the switch, which supports lower latency for certain delay­ sensitive traffic. The GS-1208M could classify the packet as one of the four priorities according to 802.1p priority tag or DSCP.
Port Mirroring
This mechanism helps track network errors or abnormal packet transmission
without interrupting the flow of data. Allow ingress traffic to be monitored by a single port that is defined as mirror capture port. The mirror capture port can be any 10/100 port, 10/100/1000 port. Mirroring multiple ports is possible but can create congestion at the mirror capture port.
Broadcast/Multicast/Unknown-Unicast Storm Control
To limit too many broadcast/multicast/unknown-unicast flooding in the
network, broadcast/multicast storm control is used to restrict excess traffic. Threshold values are available to control the rate limit for each port. Packets are discarded if the count exceeds the configured upper threshold.
Trap Event for Exception Management
We use SNMP Trap mechanism to inform supervisor to know the instant
abnormal status of the switch.
Build-in web-base management
Instead of using CLI interface, we provide a more convenient GUI for user.
We just need to configure switch via Web Browser. It is more quickly for user to familiar with the method to control switch on the basis of this design.
Technical SpecificationsTechnical Specifications
LED Description
LED Color Function
Global POWER Green -Lit when +5V power is coming up Global CPU Green -Blinks when CPU is active Port LINK/ACT Green -Lit when connection with remote device 1-8 is good
-Blinks when any traffic is present Port 10/100/ Green -Lit Green when TP link on 1000Mbps 1-8 1000Mbps /Amber speed
-Lit Amber when TP link on 100Mbps speed
-Off when 10Mbps or no link occur
RUB
TECHTECH
Gigabit Switch
Web Smart Switch
Gigabit Switch
Bandwidth Control
---Supports bandwidth rating per port ingress and egress rate limit 1000Mbps with 1Mbps increment Port Trunk
---MAC-based trunking with automatic link failover, max four Ports with 4 trunking group
---Up to 4 ports for each group Broadcast Storm
---Provide Broadcast Storm suppression that mechanism is used to protect regular traffic from an overabundance of broadcast or multicast traffic. Port Mirroring
---Supports port mirroring, allowing ingress and /or egress traffic to be monitored by a single port designated as the mirror capture port. Software Upgrade
---Supports Http firmware upgrade via web GUI
Overview
The GS-1208M Gigabit switch, an 8 port desktop Gigabit web smart switch, meets the demand of bandwidth. This desktop switch seamlessly integrates with the rest of the network through its auto-negotiating and non-blocking design. To break through the bottlenecks at the core of network, the switch provides up to 16Gbps aggregate bandwidth and seamless migration and the most cost effective method for bringing high-speed networking to the desktop. In addition, the switch implements the QoS (Quality of Service), Port Mirror, VLAN, Port Trunk. It is suitable for office application.
Network Interface
Configuration Connector Port
10/100/1000Mbps TP (RJ-45) TP(RJ-45) 1 to 8
Full Forwarding Packet Rate: PPS (64 Bytes packets per second)
Forwarding Rate Speed
14,880PPS 10Mbps
148,800PPS 100Mbps
1,488,000PPS 1000Mbps
Cable and Maximum Length
Feature Detailed Description
10Base-T UTP Cat. 3, 4, 5 or up
100Base-TX UTP Cat. 5 or up
1000Base-T UTP Cat. 5 or up
Hardware Spec
Feature Detailed Description
Voltage 100~240 VAC
Frequency 50~60 Hz
Power Consumption 10W Max
Operation Temperature 0 to 40 C
Operation Humidity 10% to 90%
Storage Temperature 0 to 55 C
Storage Humidity 5% to 95%
Dimensions 27(H) x 159(W) x 102(D) mm
Safety Complies with FCC Part 15 Class A &
CE Mark
Ordering InformationOrdering Information
Model
GS-1208M 8-Port Web-Smart Gigabit Ethernet Switch
Ruby Tech Corp.
2F, No.7, Lane 50, Nan Kang Road, Sec.3, Taipei, Taiwan http://www.rubytech.com.tw TEL:886-2-2785-3961 FAX:886-2-2786-3012 E-mail rubytech@mail.rubytech.com.tw
Loading...