Ruby Tech ES-1126C-D User Manual

Fast Ethernet Switch

R

RUB

Networking & Communications

TECHTECH

Fast EthernetSwitch

Web Smart Switch

ES-1126C/D

ES-1126C/D:

24-Port Web-Smart Fast Ethernet Switch with 2 SFP/GBIC Gigabit Dual Media Ports

Key FeaturesKey Features

Standard compliance

---IEEE 802.3 10Base-T Ethernet
(twisted-pair copper)

---IEEE 802.3u 100Base-TX Ethernet
(twisted-pair copper)

---IEEE 802.3ab 1000Base-TX Ethernet
(twisted-pair copper)

---IEEE 802.3z 1000Base-TX/FX
Ethernet

---IEEE 802.3x flow control capability

---ANSI/IEEE 802.3 auto-negotiation

---IEEE 802.1q VLAN

RoHS Complianc
Subscriber Interface

---1-24 10/100Mbps Fast Ethernet ports.

---25,26 are Gigabit TP(SFP/GBIC) Fiber
auto sense

---Auto-Negotiation and Auto-MDIX

---Backpressure flow control for half
duplex.

---802.3x flow control for full duplex.

---Connector: 24 RJ-45 and 25,26 dual
media (RJ-45/SFP or RJ-45/GBIC)

Performance

Switching capacity:

---Non-blocking switch fabric supports up

to 24FE+2GbE, ports

---8 K MAC addresses

---256k packet buffer and 128k control
memory
VLAN

---Port-base VLAN

---IEEE802.1q tag-base VLAN, 4094
max

---Support Metro-mode to easily
configure for MAN
Qos

---Port Based, 802.1p based QoS packet
classification

---Supports four level priority queues to
prioritize in-bound and out-bound
traffic
Port Trunk

---2 Fast Ethernet +1 Gigabit Ethernet
groups

---Per-group max 4 member

---Mac-based trunking with automatic
link fail-over

BenefitsBenefits

QoS with Four Priority Queues

The QoS(Quality Of Service) feature provides four internal queues to support

four different classifications of traffic. High priority packet streams experience
less delay inside the switch, which supports lower latency for certain delay­ sensitive traffic. The ES-1126C/D can classify the packet as one of the four
priorities according to 802.1p priority tag. The QoS operate at full wire speed.
The actual scheduling at each egress port can be based upon a strict priority,
weighted round robin or a mix of both.

Port Mirroring

This mechanism helps track network errors or abnormal packet transmission

without interrupting the flow of data. Allow ingress traffic to be monitored by a
single port that is defined as mirror capture port. The mirror capture port can
be any 10/100 port, 10/100/1000 port. Mirroring multiple ports is possible but
can create congestion at the mirror capture port.

VLAN for Performance & Security

The VLAN feature in the switch offers the benefits of both security and

performance. VLAN is used to isolate traffic between different users and thus
provides better security. Limiting the broadcast traffic to within the same VLAN
broadcast domain also enhances performance.

Isolated Group, Provide Secure for Certain Ports

The isolated group feature allows certain ports to be designated as protected.

All other ports are non-isolated. Traffic between isolated group members are
blocked. Traffic can only be sent from isolated group to non-isolated group.

Mac-based Trunking with Automatic Link Fail-over

Dynamic fail-over means packets will not get assigned to any trunk member

port that has failed. If one of the ports were to fail, traffic will automatically get
distributed to the remaining active ports.

Trap Event for Exception Management

We use SNMP Trap mechanism to inform supervisor to know the instant

abnormal status of the switch.

2 Dual Media for Flexible Fiber Connection

25, 26 dual media port are provided for flexible fiber connection. You can

select to install optional transceiver modules in these slots for short, medium
or long distance fiber backbone attachment. Use of the SFP will disable their
corresponding built-in 10/100/1000Base-T connections.

Build-in Web-base Management

Instead of using CLI interface, we provide a more convenient GUI for user.

We just need to configure switch via Web Browser. It is more quickly for user
to familiar the method to control switch on the basis of this design.

RUB

TECHTECH

Networking & Communications

R

Fast EthernetSwitch

Web Smart Switch

Fast Ethernet Switch

Broadcast Storm

----Multicast/Broadcast/Unknown-Unicast
Storm suppression.
Port Mirroring

---Support 1: N RX port mirroring.
Isolated Group

---Provide one group allows certain ports
to be designated as protected.
Rate Limit

---Ingress rate limit

---Egress rate limit

Overview

ES-1126C is a Web-Smart Fast Ethernet
switch with 24 10/100Base-TX (RJ-45
connectors) and 2 Gigabit dual media
(RJ-45/SFP ) ports .It is a
standard switch that meets all IEEE 802.3
/u/x/z Gigabit, Fast Ethernet specifications.
The switch can be managed through
Web-based management unit, associated
with web-based management, the network
administrator can logon the switch to
monitor, configure and control each port's
activity. In addition, the switch implements
the QoS (Quality of Service), VLAN, Trunk.
It has a rich feature set suitable for
streaming VoIP, video, and data traffics for
multimedia applications.
In this switch, Port 25, 26 includes two
types of media --- TP and SFP Fiber

(LC, BiDi-SC....; this port supports 10/100/

1000Mbps TP or 1000Mbps SFP
Fiber with auto-detected function.
1000Mbps SFP Fiber transceiver
is used for high-speed connection
expansion.

or RJ-45/GBIC

/GBIC

/GBIC

/GBIC

Technical SpecificationsTechnical Specifications

LED Description

LED Color Function

Global POWER Green Lit when +5V power is coming up
Global CPU ACT Green Blinks when CPU is activity
Port 1-24 LINK/ACT Green Lit when connection with remote device
is good
Blinks when any traffic is present
Port 1-24 100/10 Green/LiGreen when TP link on 100Mbps speed
Mbps Ambert Lit Amber when TP link on 10Mbps speed
Off when 10Mbps or no link occur
Port SFP/ Green Lit when SFP/GBIC connection with
25,26 GBIC remote device is good
Blinks when any traffic is present

Hardware Spec

Feature Detailed Description

Voltage 100~240V

Frequency 50~60Hz

Consumption 30W

Ambient Temperature 0 to 40 C

Humidity 5% to 90%

Dimensions 44(H) x 442(W) x 209(D) mm

Weight 2.9kg

Safety Comply with FCC Part 15 Class A &

CE Mark Approval

Packing InformationPacking Information

Carton Dimensions (mm) pcs/Carton N.W (KG) G.W (KG)

530x512x345 5 19 20

Ordering InformationOrdering Information

ES-1126C 24-Port Web-Smart Fast Ethernet Switch with
2 SFP Gigabit Dual Media Ports
ES-1126D 24-Port Web-Smart Fast Ethernet Switch with
2 GBIC Gigabit Dual Media Ports

Optional SFP Module
SFP.LC 1000Base-SX GE SFP Fiber Module,

LC Multi-Mode 850nm
SFP.LC.M2 1000Base-SX GE SFP Fiber Module,
LC Multi-Mode 1310nm 2km

Note:

We recommend the SFP transceiver from the following vendors:

1. Ruby Tech Corporation

2. Agilient Technologies

3. AVAGO Technologies

4. Finisar Corporation

Ruby Tech Corp.

3F, No.1, Lane 50, Nan Kang Road, Sec.3, Taipei, Taiwan http://www.rubytech.com.tw
TEL:[phone] FAX:[phone] E-mail [e-mail]

2008-07.30 Version A

Technical information listed is subject to change without prior notice. All brand names and trademarks are property of their respective owners.

Copyright c 2008 Ruby Tech Corp. All rights reserved.