Ruby Tech CR-2010 User Manual

RUB

TECHTECH

Intellident Switch

Central Office Switch

Intelligent Switch

CR-2010

CR-2010

24-Port 100M SEP-SC Fiber + 2 Gigabit SEP-SC Fiber/TP(Fixed) Dual Media Port Intelligent
Ethernet Switch

Key FeaturesKey Features

Supports in-band/out-of-band

management

Supports backpressure for half
duplex and 802.3x flow control for full
duplex

Supports 2 FE ports on CPU board for
management network

Supports head of line (HOL) blocking
prevention

Max switching capacity: 8.8G non­ blocking at wire speed

Supports chassis ID for location
alignment

Supports management through any
Ethernet port and RS-232

Supports short message and email
for trap and alarm

Supports per port external loopback
capability

Supports port mirroring function

Support MIB II, Bridge MIB, Ethernet
MIB, Enterprise MIB, RMON I MIB

Supports port-based/802.1v and

802.1q tagged VLAN, up to 256
active VLANs

Supports IP multicast with IGMP
snooping

Supports Ethernet multicasting and
broadcasting and flooding storm
control

Supports max of 50 per port allowed
MAC address entries and 50 global
denied MAC address entries for port
security

Supports max. 32 entries of illegal
table

Supports Auto-ping function with
adjustable interval

Supports 802.1p CoS with 2 level
priority

Supports detection of temp. x 2,
voltage, fans speed x 3

Supports 3 fans: two embedded in
power and one driven by two power

Supports dual redundant pluggable
power with loading balance

Technical SpecificationsTechnical Specifications

Performance:

Bandwidth: 8.8Gbps Switching Capacity

VLAN: 256 active
IP multicast table entries: 2k
Supports Packet length up to max of 1536 bytes long
Supports 10k MAC address table

Standards Compliance:

IEEE 802.3u /z /x /ab /ad

IEEE 802.1d /p /q /v /x /advanced 802.1x
100Base-FX Fast Ethernet Fiber Specification
1000Base-SX/1000Base-LX Gigabit Ethernet Fiber specification
SNMP
RMON

Protocol Support :

802.1d/1w/1s STP

802.3ad LACP

802.1q with GVRP/GMRP/GARP

802.1p priority queue
IGMP snooping
ARP, RARP, RIP, DHCP server/client/relay
Telnet, BootP, TFTP, FTP, HTTPD, NTP

Network Management:
RFC 1213 MIB (MIB-II)
Interface MIB

Address Translation MIB
IP MIB
ICMP MIB
TCP MIB
UDP MIB
SNMP MIB
RFC 1757 RMON MIB
Statistics Group 1
History Group 2
Alarm Group 3
Event Group 9
RFC 1493 Bridge MIB
RFC 1643 Ethernet MIB
Enterprise MIB

Maximum Switching Ports:

The maximum service port capability:

- 24 Fast Ethernet ports

- 2 Gigabit Ethernet ports

RUB

TECHTECH

Intellident Switch

Central Office Switch

Intelligent Switch

Overview

CR-2010 implements 24 100Mbps SEP
/SC fiber ports and 2 Giga fiber (SEP/
SC)/TP(Fixed) dual media ports,
specifically designed for MTU (Multi­Tenant Unit) application.
It's fully compliant with the standards
of IEEE 802.3/u/x/z/ab. With SNMP
agent and web-based management,
the network administrator can logon
the switch to monitor, and configure.
In addition, CR-2010 abounds with
functions, including QoS (Quality of
Service), tag-/port-based VLAN, Port
Trunking, Bandwidth Control, Port
Security, Fail-over, RMON and IGMP
snooping capability via the intelligent
software. The overall network
management is enhanced and the
network efficiency is also improved to
accommodate high bandwidth
applications with security.

Overview

Network Interface:

1000Base-T:

- Connectors: RJ-45

- Auto-Negotiation

- Transmission: Full/Half-Duplex

- Max. Cable Length: up to 100m

100Base-FX (Multi mode):

- Connectors: SC

- Transmission: Full/Half-Duplex

- Max. Cable Length: up to 2km for 50/125

- Wavelength: 1310nm

100Base-FX (Single mode):

- Connectors: SC / Bidi-SC

- Transmission: Full/Half-Duplex

- Max. Cable Length: 100km for 9/125

- Wavelength: 1310nm or 1550nm

1000Base-SX (Multi mode):

- Connectors: SC

- Auto-Negotiation

- Transmission: Full-Duplex only

- Max. Cable Length: 220m for 50/125

- Wavelength: 850nm

1000Base-LX (Single mode):

- Connectors: SC

- Auto-Negotiation

- Transmission: Full-Duplex

- Max. Cable Length: 50km for 9/125

- Wavelength: 1310nm or 1550nm

Led Indicate

LED Function

CPU Power Power status

Module LNK/ACT(TP P1-P2) Link and Activity status

CPU run CPU Activity status

Fiber Ports FE Fiber: LNK/ACT Port Link and Activity status

Gbe Fiber: LNK/AC TPort Link and Activity status

Gbe TP Ports LNK/ACT Port Link and Activity status

Power

Requirement

AC Power: 90 ~ 300VAC
DC Power: -36~-72VDC with two independent power cords
Power Consumption: 50W

Ambient Temperature: 0 ~ 50 C
Humidity: 5 ~ 90%
Dimensions: 442(W) x 347.9(D) x 88(H) mm

(Standard 19" rack mount with 2U height)

Certification: FCC Part 15 Class A,CE Mark

Intelligent Switch

RUB

TECHTECH

Intellident Switch

Central Office Switch

Ordering Information

Ordering Information

Model Numbers

CR-2010SP 24-Port 100M SEP-SC+2 Gigabit TP/SFP Dual Media Ports Managed Switch

CR-2010GB 24-Port 100M SEP-SC+2 Gigabit TP/GBIC Dual Media Ports Managed Switch

CR-2010-P01 1U AC Power Module
CR-2010-P02 1U DC Power Module

Optional SEP Fiber Module for 100M Port

FM-SEP.SC SEP, FE SC Multi-Mode Fiber Module 1310nm
FM-SEP.SC.S05 SEP, FE SC Single-Mode 5Km Fiber Module 1310nm
FM-SEP.SC.S20 SEP, FE SC Single-Mode 20Km Fiber Module 1310nm
FM-SEP.SC.S40 SEP, FE SC Single-Mode 40Km Fiber Module 1310nm
FM-SEP.SC.S60 SEP, FE SC Single-Mode 60Km Fiber Module 1310nm
FM-SEP.BS5.S20 SEP, FE BiDi SC Single-Mode 20Km Fiber Module 1550nm, Type 1
FM-SEP.BS3.S20 SEP, FE BiDi SC Single-Mode 20Km Fiber Module 1310nm, Type 2

Optional SFP Fiber Module for Gigabit Port
SFP.LC 1000Base-SX GE SFP Multi-Mode Fiber Module 850nm
SFP.LC.S10 1000Base-LX GE SFP Single-Mode 10Km Fiber Module 1310nm

SFP.LC.S30 1000Base-LX GE SFP Single-Mode 30Km Fiber Module 1310nm
SFP.L5.S50 1000Base-LX GE SFP Single-Mode 50Km Fiber Module 1550nm
SFP.BL5.S10 1000Base-LX GE SFP BiDi_LC 10Km Module Single Fiber 1550nm, Type 1
SFP.BL3.S10 1000Base-LX GE SFP BiDi_LC 10Km Module Single Fiber 1310nm, Type 2
SFP.BL5.S20 1000Base-LX GE SFP BiDi_LC 20Km Module Single Fiber 1550nm, Type 1
SFP.BL3.S20 1000Base-LX GE SFP BiDi_LC 20Km Module Single Fiber 1310nm, Type 2

(without Power Module)

(without Power Module)

Optional GBIC Fiber Module for Gigabit Port

GBIC.SC 1000Base-SX GE GBIC MM Fiber Module MM 850nm
GBIC.SC.S10 1000Base-LX GE GBIC 10Km Fiber Module SM 1310nm
GBIC.SC.S30 1000Base-LX GE GBIC 30Km Fiber Module SM 1310nm
GBIC.SC.S50 1000Base-LX GE GBIC 50Km Fiber Module SM 1550nm
GBIC.BS5.S10 1000Base-LX GE GBIC BiDi_SC 10Km Module Single Fiber 1550nm, Type 1
GBIC.BS3.S10 1000Base-LX GE GBIC BiDi_SC 10Km Module Single Fiber 1310nm, Type 2
GBIC.BS5.S20 1000Base-LX GE GBIC BiDi_SC 20Km Module Single Fiber 1550nm, Type 1
GBIC.BS3.S20 1000Base-LX GE GBIC BiDi_SC 20Km Module Single Fiber 1310nm, Type 2

Note:

We recommend the SFP transceiver from the following vendors:

1. Ruby Tech Corporation

2. Agilient Technologies

3. AVAGO Technologies

4. Finisar Corporation

Ruby Tech Corp.

2F, No.7, Lane 50, Nan Kang Road, Sec.3, Taipei, Taiwan http://www.rubytech.com.tw
TEL:[phone] FAX:[phone] E-mail [e-mail]

2008-03.10 Version A

Technical information listed is subject to change without prior notice. All brand names and trademarks are property of their respective owners.

Copyright c 2008 Ruby Tech Corp. All rights reserved.