Rubicon Express GEN2 User Manual

RUBICON MANUFACTURING INC. 3290 MONIER CR. RANCHO CORDOVA, CA. 95742 916-473-4600

INSTALLATION INSTRUCTIONS FOR GEN2 SWAY BAR DISCONNECTS

GEN2 DISC D Page 1 of 2

PICTURE -A-

MOUNTING PIN HOLE LOCATION & MOUNTING ORENTATION FOR ALL TJ’S

NOTE- ABOVE IMAGE SHOWS 11” DISCONNECTS (P/N RE1142, FOR 4.5-5.5” LIFTS)

FOR 2-3.5” LIFTS, 9” DISCONNECTS ARE USED (P/N RE1141), MOUNT PIN APPROX 2” FOREWARD FROM ABOVE POSITION

FOR 0-2” LIFTS, 7” DISCONNECTS ARE USED (P/N RE1140), MOUNT PIN APPROX 4” FOREWARD FROM ABOVE POSITION

PICTURE -B-

MOUNTING PIN HOLE LOCATION & MOUNTING ORENTATION FOR ALL XJ & ZJ’S, W /O RE SWAY BAR

RELOCATION BRACKETS (P/N RE9921)

GENERAL INSTALLATION TIPS

MOUNTING ORIENTATION FOR ALL

XJ & ZJ’S WITH RE SWAY BAR RELOCATION

BRACKETS (P/N RE921)

1. FOR 11” TJ DISCONNECTS (P/N RE1142), IT IS NECESSARY TO
SLIGHTLY BEND FORWARD, THE LOWER PART OF THE

FENDER SUPPORT STRUCTURE, TO MAKE CLEARANCE FOR

THE SWAY BAR LEVER.

GEN2 DISC D Page 2 of 2