Rubbermaid RMD106 Owner's Manual

Garden
Dump
Cart

Owners Manual

Model RMD106

For product inquiries:
Tricam Industries Asia Ltd.
7677 Equitable Drive
Eden Prairie, MN 55344
800-867-6763

12/05

• Important Safety Instructions

• Assembly Instructions

• Parts and Hardware Identification

CAUTION:

Read, understand and follow ALL instructions before using this product.

U.S. Patent No. 6,851,756
Other Patents Pending

DO NOT EXCEED MAXIMUM OVERALL LOAD CAPACITY 600 LBS.
MAXIMUM DUMPING LOAD CAPACITY 300LBS

CAUTION

Using the Dumping Feature

To operate the dumping feature, pull the dumping
release handle outward to release the plastic bed from
the locking mechanism. Lift up the release handle to
rotate cart upward into the dumping position.

Returning the Plastic Bed to
the Lowered Position

Rotate the plastic bed back down to the lowered position.
Make sure the dumping release handle is locked into place
when the cart is in the lowered position.

Step 1

Remove clips and cotter pins.

Step 2

Rotate t-handle and insert cotter pin.
Secure by attaching the clip.

Step 3

The second cotter pin is used to attach the handle to the
trailer hitch.

T-handle Instructions

Step 3

Assemble lock to tub
using truss head
M8X20 bolts (4pcs.),
M8 lock nuts (4pcs.),
washers (4pcs.).

1. READ ALL INSTRUCTIONS CAREFULLY BEFORE USE. If you do not understand these instructions, need clarification or
further explanation, please call our toll free answer line for assistance at 1-800-867-6763.

2. Do not load Garden Dump Cart with more than 600 lbs. (272 kg). Do not use the dumping feature of the Garden Dump
Cart with more than 300 lbs. (136 kg).

3. Do not allow children to use the Garden Dump Cart unsupervised. This Garden Dump Cart is not a toy.

4. Always distribute payload evenly over the surface of the bed.

5. Do not load any items on the top edges of the plastic tray.

6. If any parts become damaged, broken, or misplaced, do not use the Garden Dump Cart until replacement parts
can be obtained.

7. Do not operate or use on objects that can cause damage to the pneumatic tires or tubes.

Do not inflate tires to more than 30 PSI (2.07 BAR).

8. SAVE THESE INSTRUCTIONS!

Your Garden Dump Cart requires assembly. Account for all parts and hardware before beginning assembly. If any parts are
missing or damaged, or if you have any questions or need additional instructions, call the manufacturer at 1-800-867-6763.

Tools required for assembly: standard screwdriver, phillips screwdriver and socket set (or two adjustable wrenches).

Step 1

The left and right rear struts are preassembled to the
rear axle frame as shown below.

Step 6

Assemble the wheels using bushings (4pcs.), washers
(4pcs.), and cotter pins (4pcs.).

Step 7

Assemble the handle to the yoke using M8X60 bolt (1pc.),

M8 lock nut (1pc.) and washer (1pc.)

Step 5

Assemble front axle assembly to tub using M8X20 truss head
bolts, M8 lock nuts, and washers.

Important Safety Instructions

Assembly Instructions

Step 2

Attach the rear axle assembly to the tub using M8X40
truss head bolts (2pcs.), M8 lock nuts (2pcs.), and
washers. Then attach left and right rear struts to the
tub using M8X20 truss head bolts (4pcs.), M8 lock
nuts, and washers.

Step 4

Assemble front axle assembly to
front frame using M8X40 bolts
(2pcs.), M8 lock nuts (2 pcs.),
and washers (2pcs.). Then
attach front axle support arm to
frame using M8X20 hex head
bolts (2 pcs.), lock nuts (2 pcs.),
and washers (2pcs.)