Rubbermaid Reveal User Manual

Thank you for your purchase of

GETTING STARTED (CONTINUED)

CONTENTS

3 Microfiber Pads

GETTING STARTED

the new Rubbermaid

© Reveal

Microfiber Spray Mop Kit!

Lower & Upper
Mop Assembly

2 Refillable Bottles

™

Refillable bottle is easy to use, just unscrew cap
and fill with hot water or a mixture of your favorite
cleaning solution and water. Securely screw cap back
on before inserting into mop.

Turn bottle upside down and snap into the bottle
receptacle in the lower assembly. Make sure flat side of
bottle is facing away from the pole. Please note that
when switching bottles, it is common for a small amount
of fluid to be left behind in the bottle receptacle. Spray
mop 3-4 times to dispense the leftover liquid and then
snap in new bottle.

USAGE & TIPS

If you prefer a mixed solution, fill bottle first with water
up to water fill line on back and then simply add your
favorite cleaning solution up to solution fill line. This
mixture ratio is the standard cleaning solution ratio of
1/4 cup per gallon of water. Do NOT use bleach.

Align the tabs on the trigger handle pole and
lower spray mop pole. Push together to lock
poles into place.

Washable microfiber pad attaches to bottom of
mop head with “Velcro-like” strips to hold pad in
place during mopping. Each pad can be used for
two or more rooms.

Microfiber Pads

1. Reusable microfiber pads are machine washable and should be

washed with like colors. Pad can be washed up to 100 times!

2. Do NOT wash with bleach.

3. Do NOT wash with fabric softener as this will impede the

microfiber pad performance.

4. Tumble dry air or low heat setting.

Refillable Bottles

1. Bottle can be cleaned by hand or in dishwasher (top rack only).

2. Bottles are NOT to be used for drinking purposes.