Rubbermaid 401096 User Manual

High Mount

LEFTLEFT

4. Attach chrome adaptor and anti-rotational
sleeve to your plumbing flush v alve assembly

Adaptor Kit

For Automatic Flusher
Installation Instructions

Components:

Pink Washer

(Included with Automatic Flush)

Chrome Adaptor

Pink Washer

(Included with Adaptor Kit)

Plastic

Push rod

1. Remove valv e handle assembly

2. Install pink washer into chrome adaptor

3. Install anti-rotational sleeve on the side of
the chrome adaptor with the pink washer

assuring flat extension rests on the back of
the flush valve assembly . Tighten securely
with wrench (included with
Automatic Flush unit).

5. Install plastic push rod extension
onto end of Automatic Flush
metal push rod.
Press push rod
extension tip
against hard
surface until
extension is fully
seated on push rod .

RIGHT

LEFT

Anti-Rotational Sleeves

* This adaptor kit includes two different anti-rota tional sleeves. One is to be used for a
left handed valve assembly and the other is for a right handed valve assembly . When
installed properly the lens should be pointing down at approximately a 45° angle.

6. Install Automatic Flush
unit onto chrome adaptor
with pink washer .
Tighten chrome nut.

401096