Rubbermaid 1S85 User Manual
M
N
R
P
C
E
H
Q
J-5H51
G
K
M
D
X
J
F
94.62"
Description Assembly Letter Quantity
Floor J-5H51 1
Left Side Panel C 1
Right Side Panel D 1
Left Back Panel E 1
Right Door Panel F 1
Right Back Panel G 1
Left Front Panel H 1
Right Front Panel J 1
Left Door Panel K 1
Gable M 2
Left Roof Panel N 1
Right Roof Panel P 1
Wall Connector Q 4
Ridge Beam R 1
Lock Hasp X 1
#14 x 1.0" Combo Pan Head Screw AA 24
1/4-20 x 0.5" Combo Round Head Bolt BB 2
1/4-20 Flat Washer CC 2
1/4-Hex Nut DD 2
Roof Pin EE 4
Required Tools
Safety Glasses
Rubber Mallet
Phillips Screw Driver
Liquid Soap
(2) Step Stools/Stepladders
45.06"
88.09"
1S85
RUBBERMAID
7' x 3'6" RESIN STORAGE BUILDING
ASSEMBLY INSTRUCTIONS
Pre-Assembly:
• Review the parts list and make sure that no parts are missing.
• Level the area where the shed will be located.
• Areas of “fill dirt” should be tamped/compacted to prevent
settling/sinking.
• If a foundation is desired, it should be constructed before assembly.
NOTE:
To simplify assembly and to ensure proper engagement of all components,
apply a mild detergent to dovetail and snap fits before assembling.
Two Person Assembly
1
Level construcion site before beginning assembly of shed. A foundation
may be constructed if desired.
OPTIONAL STEP:
If desired, recessed anchor locations (4 places) can be used to anchor the shed floor
to a foundation.
2
41/8" 41/8"
33/4"
321/8"
71/2" 71/2"
41/8" 41/8"
7
43
/16"
84"
Using a utility knife, cut the long sides of each wall slot tab and then use a screwdriver to knock it out 14 places on Floor (J-5H51). Open hinge holes 2 places.
76"
84"
3
3
/4"
437/16"
J-5H51
3
click
Using a srewdriver, punch out the screw holes on the top of Left Side
Panel (C) 2 Places.
Connect Left Side Panel (C) into Floor (J-5H51).
4
Lubricate dovetails on Left Front Panel (H) 4 places with liquid soap.
Connect Left Front Panel (H) into dovetails of Left Side Panel (C), engage
snaps on bottom of Left Front Panel (H) into Floor (J-5H51).
click
5
Screw Holes
C
J-5H51
J-5H51
Lubricate dovetails on Left Back Panel (E) 4 places with liquid soap.
Connect Left Back Panel (E) into dovetails of Left Side Panel (C),
engage snaps on bottom of Left Back Panel (E) into Floor (J-5H51).
C
6
11111
22222
C
H
Repeat Steps 3–5 to assemble right side of shed.
Continue to Step 7.
11111
J-5H51
22222
click
See Step 3
11111
22222
11111
E
C
J-5H51
22222
See Step 5
G
See Step 4
D
J
Loading...