RTX CT816X Users Manual

Quick Reference Guide
Front View
Package Contents:
- RTX8162EX
- Battery
- Belt clip
- This Reference Guide
To use the RTX8162EX for the first time:
- Open the battery lid;
- Remove the plastic strip from the
- Close the battery lid;
- Place the RTX8162EX on the chargedr
battery contacts
to fully charge the battery
g
Main Menu Items
Contacts
Central
Directory
Calls Settings Calendar Accessories Messaging
Top Line Icons
Signal
Strength
Battery
Status
Silenced Locked Ring
Pull
Cord
Message
Voice
Mail
Alarm
Set
Missed
Call
Caller
Filter
USB
GETTING STARTED
Turning the RTX8162 Ex on and off
Press and hold for a few seconds.
Activatin
When the display of your phone is dark, press any key to activate your phone (phone in
Idlemode).
Lock/Unlock your phone
In Idle mode press and then (toggle function) or press “Key Lock” on the side of the phone. To unlock your phone press and then (toggle function).
Make a call
In Idlemode:
your phone
1. Press and then type the number you want to reach. OR
2. Press and then type the number you want to reach (speakerphone call) OR
3. Type the number you want to reach and then press or OR
4. Use a speed dial key ( or ) OR
5. Press soft key or , select the required contact and press soft key , , or .
Answering an incoming call
Press or, for speakerphone call, .
End a call
Press .
r
r
r
I
t
I
e
n
I
d
s
I
v
I
y
t
I
o
a
s
r
u
u
M
a
,
,
,
f
a
s
o
t
u
f
h
o
e
o
q
r
n
u
e
g
e
sig
e
c
c
a
v
q
o
o
o
)
f
r
c
s
o
t
o
n
p
c
n
o
c
f
,
e
b
S
s
ster
o
s
m
u
d
c
c
e
t
u
r
o
w
e
e
s
a
S
)
i
t
o
f
e
a
r
w
a
s
e
y
a
e
s
u
c
s
a
w
e
e
a
a
g
o
e
t
y
v
h
o
t
e
u
y
e
s
t
s
m
e
s
a
s
t
f
e
a
d
e
h
t
e
t
e
y
y
i
ke an en
Du
ing a call
tog
gle betwe
Ch
ange the
Du
ing a call
Us
e the Spe
Du
ing a call
M
te the mi
Pre
ss the so
M
te the mi
In
dlemode
No
e: You m
W
ite and s
In
dlemode
uiry call
press
en the tw
olume
press “V
ker pho
press
rophone
t key
rophone
, press an
y need t
nd a text
, press
and dial t
parties.
lume U
e
; to de-a
during a
. To turn
during a
d hold
enter yo
message
, use the
he numb
Press
” or “Vol
tivate: p
all
the micr
all
for a fe
ur voicem
navigatio
r of the p o transfe
me Do
ess ag
phone on
second
ail numb
n keys to
rty you
the call.
n” on th
in.
again, pr
.
r in the h
select
ant to co
side of t
ss the s
ndset se
and pre
nsult. Pre
e phone.
ft key
tings firs
ss the so
s to
.
.
t key
.
1. Press
2. Use th
Th
n press s
req
uired des
se
tsuccessf
As
In
dlemode
an
press so
to
croll to t
M
ke a shor
In
dlemode
the
navigati
na
igation k
Re
ister th
In
dlemode
the
navigati
ke
s to selec
En
er the re
Wa
it for the
Us
ing the m
ning a
oft key
e navigati
ft key
ination(s
lly.
contact t
, press so
t key
e approp
tcut
, press
n keys to
ys or fun
handset
, press
n keys to
t (Regi
uested re egistrati
nu
, the
on keys t
, sele
. When “
a speed
t key
. Choos
iate num
, use the
select (
tion key
, use the
select
) and
gistration
n to be c
enter th
select a
t the typ
message
ialling k
select th
er (2..9)
navigatio
hortcuts
text of stored dr of the m
ent” is gi
y
e contact
nd press
and pres
n keys to
. Now yo
.
navigatio
(Connect
press sof
informati
n keys to
vity) and
key
n (conta
mpleted.
our mess
ft messa
ssage (n
ven in th
you want
soft key
soft key
select
can assi
select press sof
.
t your S
ge. e and pr rmal or
display
to assign
. Us
.
and pres
gn a func
and pres
key
stem Ad
ss soft k
rgent) an
our mess
a speed
the navi
y .
d choose
ge has b
ialling ke
gation ke
soft key
ion to on
of the
soft key
. Use t
inistrator
e navigat
for this).
OR
. U
. U
he
en
s
se
se
on
In
dlemode
req
uired me
sen men
ch To
go back o
, press
u, menu or menu
ne step in
to acces
ab and item/tab.
the men
the main enu item.
Other so
or leave
menu. U Use soft
t keys m altogethe
e the na
key
y provide
r, press
igation k
( or pres
addition
.
ys to go
) to s l options.
o the
lect the
M
e
o
i
c
e
d
d
r
u
r
S
S
ds
A
n
d
D
N
E
w
L
m
g
o
l
u
r
R
e
r
t
f
N
e
a
o
M
s
e
r
o
k
r
m
a
n
n

i
o
s
s
a
a
f
e
d
e
c
B
M
n
r
e
y
w
l
a
a
e
f
D
e
g
f
g
nu list
1.
2.
3.
4.
Contacts
List
Central D
Sele
Calls
All Ca
Answ
Dialle
Misse
Settings
Gene
-
-
-
(S Fre Tu
-
-
-
-
-
-
-
Soun
-
-
-
f contacts
rectory
t required co
lls
red Calls
Calls
Calls
al Settings
Silent Time & Date Language
pported: Eng nch, Italian, kish, Polish,
hortcuts (for
LED Signal
Red LGreen YelloBlue
Security
PhoneAutoChanProxy
Handset Nam
RFID Reset Setting
tatus
Normal & S
Incoming Cal
Ring
Ring
Gro
Inte
Eme Arb. Incr
Vib
Message No
Noti
Notif
Incr
Vibr
lerts
Alert V
Alert
Increa
Vibrato
tact by nam
lish, Spanish,
utch, Danish orwegian, G
the navigati
D LED
LED
ED
Lock
atic Key Loc e PIN Password
e
s
unds Silent
Volume
External/Inte
p Ring
com Ring
rgency Ring
ing
asing Ring
ator
ifications
ication Volu
ication
ormal/Urgen
asing Notific
tor
lume
elody
ing Alert
r
German, , Swedish,
eek & Russia n keys)
nal/Unknow
e
t/Emergency
tion
Setting
s (continued)
-
Feedback
Key
Con
Cov
Cha
-
Noise Re
Display
Calls
)
Connect
5.
6.
Calendar
Manage y
Accessorie
7.
Messaging
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Alarm
Calcul
Stopw
   
Wallpap
Startup S
Power Sa
Charger
Units
Answer
Caller Fil
Emerge
Numbe Messag SOS Ke Man Do Pull Cor
Voicemai
Silent Ch
Missed C
vity
Register
Deregist
Select Ne
Bluetooth
EnabledSearch Paired
ur appointm
tor
tch
Drafts
Inbox
Sent Messa
Settings
Sound
irmation Sou
rage Warnin
rger Warning
uction
r
reen
ve
acklight
ode
ter
cy Call
n
d
Number
rging
ll Time
r
twork
/Disabled
or Devices
evices
nts
es
nd
Additional Information for RTX8162 EX
Regulatory information
ATEX compliance information
The RTX8162 EX complies with:
IEC/EN60079-0 and IEC/EN60079-11 with marking
I M2 Ex ib I Mb II 2G Ex ib IIC T4 Gb II 2D Ex ib IIIC T135C Db
-10C ~ +50C IP65 Um = 5.25VDC CE0035 Presafe 17 ATEX 9520 X IECEx PRE 17.0011X
The symbol X placed after the certification number indicates that during the use of the handsets the following conditions shall be met:
1. Do not sink the device in oil or hydraulic fluid
2. Protect your device from aggressive liquids and vapors
3. In the case of suspected damage, do not use the device in hazardous zone
Handset Product Markings
The RTX8162 ExDECT handset is a powerful communication tool and with it’sEx design aimed to be used in hazardous area. The RTX8162 ExDECT handset is certified with the protection level “High protection” for use in zone 1 & 2 (Gas), in zone 21 & 22 (Gas) and in De-energized Ex atmosphere (Mining). The following Handset product markings will apply for Europe and EFTA.
Important safety information
Only use batteries marked with”RTX8162 EX ”
Do not use any battery WITHOUT marked “RTX8162 EX”
Since this may present a risk of leakage, fire, explosion or other hazardous situation.
Do not replace battery in hazardous area*
For battery replacement or removal, please do it outside hazardous area. After replacement of battery outside hazardous area, make sure the battery knob on battery has correctly and completely locked into the handset before going into hazardous area. Never disassemble, customize or short-circuit batteries
Charge the battery or handset only outside of the hazardous area
Gx66/I766 EnhDesktop ChargerwithGx66 AC Adapter – Europlugor Gx66 AC Adapter – Multi Regionor with the Gx66/I766 Enh Multi Charger Rack with Gx66 AC Adapter -Multi Charger Rack. Plug the Gx66 AC Adapter – Europlug, Gx66 AC Adapter – Multi Regionor the Gx66 AC Adapter -Multi Charger Rackin a wall outlet socket near the
equipment for easy access/removal of the AC/DC adaptor.
*For more information or enquiries on hazardous area, please contact and consult your supplier or the local authorities for proper use of the product.
and only in combination with the
Important battery information
This product uses rechargeable Lithium-lon batteries
RTX8162 EX
Only use batteries that come with the handset or dedicated spare batteries marked with RTX816x Ex Battery Pack.
- Do not use any other type, since this may present a risk of leakage, fire, explosion or other hazardous situation.
- Never disassemble, customize or short-circuit batteries.
- Do not place battery in fire or heat the battery.
- Charge the battery or handset outside hazardous area* and only in combination with the Gx66/I766 Enh Desktop
Charger with Gx66 AC Adapter – Europlug or Gx66 AC Adapter – Multi Region or with the Gx66/I766 Enh Multi Charger Rack with Gx66 AC Adapter -Multi Charger Rack.
*For more information or enquiries on hazardous area, please contact and consult your supplier or the local authorities for proper use of the product.
(Cell model no.: LP553450SI - Li-ion 3.7V 1100mAh 4.2Wh).
Sensitive Electronic Equipment
Any radio-based equipment can potentially cause interference with other equipment and can be interfered from other equipment. This also applies for DECT equipment. However due to the very low transmission power level the chances for interference are very small. Research proves that operational DECT phones normally don’t influence electronic equipment however some precautions must be taken into account for sensitive electronic equipment e.g. sensitive laboratory equipment. When DECT phones operate in straight nearness of sensitive electronic equipment incidental influence can appear. You are advised not to place the DECT phone on or close (less than 10cm) to this kind of equipment, even in standby mode. Please also use the other documentation supplied with the various parts of your telephone system.
Product disposal information
For countries in the European Union
Be sure to dispose of these products as well as its packing material in an environmentally compatible way. Electrical equipment, including the battery, should not be disposed of as municipal waste. These products should be taken to a designated facility where the best available treatment,
At www.nec-enterprise.com/About-NEC/Environment/Green-policy-148 you can find information about separate disposal and environmentally sound recycling
For countries outside the European Union
Disposal of electrical and electronic products in countries outside the European Union should be done in line with the local regulations. If no arrangement has been made with your supplier, please contact the local authorities for further information
Battery disposal information
Defect or exhausted batteries should never be disposed of as municipal waste. Return old batteries to the battery supplier, a licensed battery dealer or a designated collection facility. Do not incinerate batteries.
Original Manufacturer: RTX Hong Kong Ltd. 8/F Corporation Square, 8 Lam Lok Street, Kowloon Bay, Hong Kong
Model: RTX8162 EX
SAFETY AND REGULATORY INSTRUCTIONS
Alcatel-Lucent 8262EX DECT Handset
Safety Instructions
This approved DECT telephone is intended to be used for industrial applications in hazardous atmospheres of up to zone 2 (gas, vapors and mists) with an Alcatel-Lucent PBX. The following conditions must be respected, notably concerning the use of radioelectric frequencies:
Changes or modifications to the equipment not expressly approved by the party responsible for compliance could void the user's authority tooperate the equipment.
recovery and recycling techniques are available.
English
To limit the risk of interference, people with pacemakers must keep the wireless telephone away from their equipment (minimum distance of15 cm/6 inches).
It is recommended to follow the standard acceptance procedures before using this equipment in human safety critical areas (hospitals...).
DECT equipment can only be used to establish links between fixed points if these links are temporary.
The conditions of access to a DECT equipment telepoint network shall be stipulated by contract with the operator of the
authorized telepointnetwork concerned.
Switch off the telephone before changing the battery.
You must not switch on or use your telephone near gas or inflammable liquids.
The handset includes magnetic elements that may attract sharp metallic objects.
CAUTION:There is a danger of explosion if the battery is replaced incorrectly. Use only recommended battery RTX816x EX
Battery Pack (3BN67361AA, Cell model no.: LP553450SI - Li-ion 3.7V 1100mAh 4.2Wh).
Be sure to dispose of these products as well as its packing material in an environmentally compatible way. Electrical equipment, including the battery, should not be disposed of as municipal waste. These products should be taken to a designated facility where the best available treatment, recovery and recycling techniques are available.
The mains power socket used must be close to the charger/holder and easily accessible, so that it can be used as an 'on/off' facility.
Charge the battery for about 6 hours before initial use.
The 8262 DECT Handset desktop Dual charger (3BN67346AA), is dedicated for 8262 EXDECTHandsets(3BN67345AA) and
needs thefollowing Power Supply Units:
PSU Europe (3BN67335AA)
- TenPao (Model S005AYV0500100) – efficiency level VI (rating I/P:AC 100-240V, 0.2A; O/P: DC 5V, 1A).
- Friwo FW7713/XX – efficiency level V (rating I/P:AC 100-240V, 150mA; O/P: DC 5V, 1A).
PSU WW (3BN67336AA)
- TenPao (Model S008ACM0500100 with UK,US,AUS plugs) – efficiency level VI (rating I/P:AC 100-240V, 0.3A; O/P: DC 5V, 1A).
- Friwo FW7712 - efficiency level V (rating I/P:AC 100-240V, 125mA; O/P: DC 5V, 0.9A).
The 8262 DECT Handset Rack Charger (3BN67351AA) will use a dedicated PSU:
- 8262 Dect handset PSU WW for rack charger (3BN67353AA)
- Ten Pao (Model S030ABM0500500) – efficiency level VI (rating I/P: AC 100-240V, 1A; O/P: DC 5V, 5A).
- Friwo FW7540/05 (rating I/P:AC 100-240V, 600mA; O/P: DC 5V, 5A).
With the 8262EX DECT Handset, use only Bluetooth devices marked with the ATEX logo, usable in an ATEX (potentially explosiveatmosphere) area.
Never charge or install the battery in an ATEX (potentially explosive atmosphere) area.
Regulatory Statements
This equipment uses DECT frequency range that depends on country: 1880 - 1900 Mhz in Europe, 1920 - 1930 MHz in US/Canada, 1910 -1930 MHz in LATAM, 1910 - 1920 MHz in Brazil. The equivalent isotropically radiated power at the antenna is less than 110 mW or 250 mW (itdepends on the country). This equipment offers also Bluetooth® Interface: frequency range 2402-2480 MHz, Radiated Power 1.72 mW.
EUROPE
This equipment is in compliance with the essential requirements of RED Directive 2014/53/EU (from 13 June 2017), ATEX Directive 2014/34/EU and with ROHS Directive 2011/65/UE.
The Declaration of Conformity may be obtained from: ALE International 32 avenue Kléber – 92700 Colombes, France
ebg_global_supportcenter@al-enterprise.com
USA and Canada
Handset: this device complies with Part 15 of the FCC Rules and with RSS of Industry Canada (FCC ID: T7HCT816X ,IC: 4979B­CT816X). Thisdevice complies with Part 68 of the FCC Rules and with IC CS-03 Part V of Industry Canada. Chargers: this device complies with Part 15-B of the FCC Rules and with ICES-003 of Industry Canada.
FCC Caution
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .
ting in conjunction with any other antenna or
Privacy
Privacy of communications may not be ensured when using the Bluetooth® handset or any additionnal Bluetooth® device.
Exposure to Radio Frequency Signals.
This device has been designed and manufactured not to exceed the SAR (Specific Absorption Rate) radio frequency power transmission limitsestablished by the different countries concerned. The SAR value measured is equal to 0.089 W/kg (the globally accepted maximum limit being1.6 W/kg).
User Instructions
Only use the handset in temperatures between -10°C to +50°C (14°F to 122°F). Only charge the battery at temperatures between +5 °C and +45 °C (41 °F and 113 °F).
Acoustic shock protection
Maximum sound pressure level for handset is compliant with European, US and Australian standards.
Directive 2003/10/EC specifying the risks inherent in noise at work
The ring contributes towards overall daily noise. To reduce the level, the following is recommended: reduce the setting, program a progressivering.
This transmitter must not be co-located or opera
transmitter.
Disposal:
The equipment must be returned to a collection point for electronic equipment waste disposal. Defective batteries must be returned to a collection point for chemical waste disposal.
Related Documentation:
Other languages for these Safety and Regulatory Instructions and User Documentation are available at the following Web site:http://enterprise.alcatel-lucent.com?product=All&page=Directory
.
ATEX compliance information
The 8262EX complies with IEC/EN60079-0 and IEC/EN60079-11 with marking
I M2 Ex ib I Mb II 2G Ex ib IIC T4 Gb II 2D Ex ib IIIC T135C Db
-10C ~ +50C IP65 Um = 5.25VDC CE0035 Presafe 17 ATEX 9520 X IECEx PRE 17.0011X
The symbol X placed after the certification number indicates that during the use of the handsets the following conditions shall be met:
1. Do not sink the device in oil or hydraulic fluid
2. Protect your device from aggressive liquids and vapors
3. In the case of suspected damage, do not use the device in hazardous zone
ISEDC statement
This device complies with Innovation, Science, and Economic Development Canad licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d' Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil nedoit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
ISEDC SAR Waring
The device has been tested and compliance with SAR limits, users can obtain Canadian information on RF exposure and compliance
Le présent appareil est conforme
Après examen de ce matériel aux conformité aux limites DAS et/ou aux limites d’intensité de champ RF, les utilisateurs peuvent sur l’exposition aux radiofréquences et la conformité and compliance d’acquérir les informations correspondantes
CS03 Warning
This product meets the applicable Innovation, Science, and Economic Development Canad technical specifications. Le présent matériel est conforme aux specifications techniques applicables d’ Innovation, Sciences et Développement économique Canada.
Loading...