Rts LCP-102 User Manual

Model LCP-102

Level Control Panel

Up to and including version 1.0

User Manual

9350-7623-000 Rev E 5/2010

Proprietary Notice

SHIPPING TO THE MANUFACTURER

The product information and design disclosed herein were originated by
and are the property of Bosch Security Systems, Inc. Bosch reserves all
patent, proprietary design, manufacturing, reproduction, use and sales
rights thereto, and to any article disclosed therein, except to the extent
rights are expressly granted to others.

COPYRIGHT NOTICE

Copyright 2010 by Bosch Security Systems, Inc. All rights reserved.
Reproduction, in whole or in part, without prior written permission from
Bosch is prohibited.

WARRANTY NOTICE

See the enclosed warranty card for further details.

CUSTOMER SUPPORT

Technical questions should be directed to:

Customer Service Department
Bosch Security Systems, Inc.
12000 Portland Avenue South
Burnsville, MN 55337 USA
Telephone: [phone]
Fax: [phone]
[e-mail]

Technical Questions EMEA

Bosch Security Systems Technical Support EMEA

http://www.rtsintercoms.com/contact_main.php

RETURN SHIPPING INSTRUCTIONS

Customer Service Department
Bosch Security Systems, Inc. (Lincoln, NE)
Telephone: [phone]
Fax: [phone]
Factory Service: 800-553-5992

Please include a note in the box which supplies the company name,
address, phone number, a person to contact regarding the repair, the type
and quantity of equipment, a description of the problem and the serial
number(s).

All shipments of product should be made via UPS Ground, prepaid (you
may request from Factory Service a different shipment method). Any
shipment upgrades will be paid by the customer. The equipment should
be shipped in the original packing carton. If the original carton is not
available, use any suitable container that is rigid and of adequate size. If
a substitute container is used, the equipment should be wrapped in paper
and surrounded with at least four (4) inches of excelsior or similar
shock-absorbing material. All shipments must be sent to the following
address and must include the Proof of Purchase for warranty repair.
Upon completion of any repair the equipment will be returned via
United Parcel Service or specified shipper, collect.

Factory Service Department
Bosch Security Systems, Inc.
8601 East Cornhusker Hwy.
Lincoln, NE 68507 U.S.A.
Attn: Service

THE LIGHTNING
FLASH AND
ARROWHEAD
WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU
OF
“DANGEROUS
VOLTAGE”
INSIDE THE
PRODUCT.

SEE MARKING ON BOTTOM/BACK OF PRODUCT

WARNING: APPARATUS SHALL NOT BE EXPOSED TO DRIPPING
OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS, SUCH
AS VASES, SHALL BE PLACED ON THE APPARATUS.

WARNING: THE MAIN POWER PLUG MUST REMAIN READILY
OPERABLE

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, GROUND­ING OF THE CENTER PIN OF THIS PLUG MUST BE MAINTAINED.

CAUTION: TO REDUCE
THE RISK OF ELECTRIC
SHOCK, DO NOT
REMOVE COVER. NO
USER-SERVICABLE
PARTS INSIDE. REFER
SERVICING TO
QUALIFIED SERVICE
PERSONNEL.

THE
EXCLAMATION
POINT WITHIN
THE TRIANGLE
IS A WARNING
SIGN
ALERTING YOU
OF IMPORTANT
INSTRUCTIONS
ACCOMPANYIN
G THE
PRODUCT

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPRATUS TO RAIN OR MOISTURE.

WARNING: TO PREVENT INJURY, THIS APPARATUS MUST BE
SECURELY ATTACHED TO THE FLOOR/WALL/RACK IN ACCOR­DANCE WITH THE INSTALLATION INSTRUCTIONS.

This product is AC only.

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.

11.Only use attachments/accessories specified by the manufacturer.

12.Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury from tip-over.

13.Unplug this apparatus during lightning storms or when unused for long periods
of time.

14.Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.

Table

of

Contents

LCP-102 Description ................................................................................................................................................3

Specifications .............................................................................................................................................................4

Location and Mounting .............................................................................................................................................5

Connections ...............................................................................................................................................................5

Power Up and Initial Settings ...................................................................................................................................8

APPLYING POWER .....................................................................................................................................................................8

ROGRAMMING MENUS ............................................................................................................................................................8

P

ETTING THE PANEL ADDRESS ..................................................................................................................................................8

S
A

DJUSTING THE DIMMER ..........................................................................................................................................................9

Panel Mode Selection ..............................................................................................................................................11

Page Select ..............................................................................................................................................................11

TRIMS Mode Assignments and Operation ..............................................................................................................12

TRIMS MODE ASSIGNMENT ....................................................................................................................................................12

PAP Mode Assignments and Operation ..................................................................................................................12

PAP MODE ASSIGNMENT ........................................................................................................................................................12

PAP M

CDP Mode Assignments and Operation ..................................................................................................................13

CDP MODE ASSIGNMENTS .....................................................................................................................................................13

CDP M

Saving Configuration Changes ...............................................................................................................................14

Notes ........................................................................................................................................................................15

ODE OPERATION .........................................................................................................................................................13

ODE OPERATION .........................................................................................................................................................13

List

of

Figures

FIGURE 1. LCP-102 Reference View ......................................................................................................................4

FIGURE 2. Connection example for a single LCP-102 or multiple LCP-102s .......................................................6

FIGURE 3. Connection example of an LCP-102 connecting to a UIO-256/GPIO-16 ............................................6

FIGURE 4. Interconnect cable from a Zeus, Cronus or ADAM intercom system to the LCP-102 .........................7

FIGURE 5. Interconnect cable from an ADAM CS intercom system to the LCP-102 .............................................7

FIGURE 6. Y cable for connection of an LCP-102 and a UIO-256/GPIO-16 to a Zeus, Cronus,

or ADAM intercom system. 7

FIGURE 7. Cable to interconnect two LCP-102s (All intercom systems) ...............................................................7

FIGURE 8. Y cable for connection of an LCP-102 and a UIO-256/GPIO-16 to

an ADAM CS intercom system. .............................................................................................................7

FIGURE 9. Cable to connect UIO-256/GPIO-16 to the LCP-102 (All intercom systems) .....................................7