RTI VDA-12 User Manual

VDA-12
4K HDMI Splitter 1x2
All Rights Reserved
Version: VDA-12_2017V1.0
4K HDMI Splitter 1x2
Preface
Read this user manual carefully before using the product. Pictures shown in this manual is for reference only, different model and specifications are subject to real product.
This manual is only for operation instruction only, not for any maintenance usage. The functions described in this version are updated till November 3, 2017. In the constant effort to improve our product, we reserve the right to make functions or parameters changes without notice or obligation. Please refer to the dealers for the latest details.
Trademarks
Product model and logo are trademarks. Any other trademarks mentioned in this manual are acknowledged as the properties of the trademark owner. No part of this publication may be copied or reproduced without the prior written consent.
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. It has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation.
Operation of this equipment in a residential area is likely to cause interference, in which case the user at their own expense will be required to take whatever measures may be necessary to correct the interference.
Any changes or modifications not expressly approved by the manufacture would void the user’s authority to operate the equipment.
4K HDMI Splitter 1x2
SAFETY PRECAUTIONS
To insure the best from the product, please read all instructions carefully before using the device. Save this manual for further reference.
Unpack the equipment carefully and save the original box and packing material for
possible future shipment
Follow basic safety precautions to reduce the risk of fire, electrical shock and injury
to persons.
Do not dismantle the housing or modify the module. It may result in electrical shock
or burn.
Using supplies or parts not meeting the products’ specifications may cause damage,
deterioration or malfunction.
Refer all servicing to qualified service personnel. To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this
product near water.
Do not put any heavy items on the extension cable in case of extrusion. Do not remove the housing of the device as opening or removing housing may
expose you to dangerous voltage or other hazards.
Install the device in a place with fine ventilation to avoid damage caused by
overheat.
Keep the module away from liquids. Spillage into the housing may result in fire, electrical shock, or equipment damage. If
an object or liquid falls or spills on to the housing, unplug the module immediately.
Do not twist or pull by force ends of the optical cable. It can cause malfunction. Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to
the device before cleaning.
Unplug the power cord when left unused for a long period of time. Information on disposal for scrapped devices: do not burn or mix with general
household waste, please treat them as normal electrical wastes.
4K HDMI Splitter 1x2
Contents
1. Introduction ................................................................................................................. 1
1.1 Introduction to VDA-12 ................................................................ ...................... 1
1.2 Features ............................................................................................................ 1
1.3 Packing List ....................................................................................................... 1
2. Panel Description ........................................................................................................ 2
3. System Connection ................................ ................................ ................................ ..... 4
3.1 Usage Precautions ............................................................................................ 4
3.2 System Diagram ................................................................ ................................ 4
3.3 Connection Procedures ..................................................................................... 5
3.4 EDID Management ............................................................................................ 5
3.5 Application ......................................................................................................... 5
4. Specification ............................................................................................................... 6
5. Panel Drawing ............................................................................................................ 8
6. Troubleshooting & Maintenance ................................................................................. 9
7. Customer Service ..................................................................................................... 10
4K HDMI Splitter 1x2
1
1. Introduction
1.1 Introduction to VDA-12
VDA-12 is a HDMI splitter featuring the capability to repeat HDMI or DVI source to 2 displays synchronously. Compliance with HDMI2.0& HDCP2.2, VDA-12 provides comprehensive resolution capacities up to 4K& 1080p 3D. Its capable to automatically recognize the resolution and HDCP compliant status of the input signal. Input signal will be automatically equalized for reliable transmission with proper EDID Management.
Moreover, VDA-12 supports convenient online update through USB port.
1.2 Features
2 simultaneous HDMI outputs Support Hot-plug Support HDMI2.0& HDCP2.2 and is backwards compatible with all previous HDMI
standards
The highest resolution is up to 4Kx2K@60Hz 4:4:4 Transmit 4Kx2K signal for 10m via AWG24 HDMI cable High bandwidth: 18Gbps Auto-identify input resolution Support EDID management, automatically adopt the resolution of the first detected
display from port 1~2
Intuitive indicator for connection status& input HDCP compliance status Convenient online firmware update
1.3 Packing List
1 x VDA-12 2 x Mounting ears 4 x Screws 4 x Plastic cushions 1 x Power Adapter (DC 5V 2A) 1 x User Manual
Note: Please confirm if the product and the accessories are all included, if not, please
contact with the dealers.
4K HDMI Splitter 1x2
2
2. Panel Description
No.
Name
Description
Power
indicator
Illuminate red once powered on.
Input HDCP
compliant
Indicator
Indicate the HDCP compliant status of the input signal.
OFF: No HDMI traffic (no picture) or abnormal link.  GREEN: Traffic with HDCP.  Blinking GREEN: Traffic without HDCP.
Output signal
Indicators
Illuminate green when there is HDMI output, correspond to HDMI OUTPUT 1~2 separately
DC 5V
Micro USB port, plug a DC 5V power adapter for power or plug a U-disk for firmware updating.
Note: Firmware updated need auxiliary equipment, please contact with our after-sales department for more details.
OUT1&
OUT2
HDMI output ports, connect to HDMI displays, automatically capture the input resolution.
IN
HDMI input port. Connect with HDMI or DVI source device such as Blu-ray DVD.
OUT 2
OUT 1
IN
DC 5V
IN
2
1
1
4
5
6
2
3
4K HDMI Splitter 1x2
3
Note:
Pictures shown in this manual are for reference only, different model and
specifications are subject to real product.
Output HDCP compliant status depends on input signal. When the input signal is
with HDCP, then output signal is with HDCP and vice versa.
HDMI signal contains both HDMI video signal and embedded audio signal (PCM,
Dolby Digital, DTS, DTS-HD), while DVI signal contains solely video signal.
VDA-12 is capable to switch input signal format according to the displays.  For example, when the input signal is HDMI and the display can only support DVI
signal, VDA-12 will switch the signal into DVI format.
EDID Management: automatically manage output signal (e.g. output resolution) to
fit all displays.
4K HDMI Splitter 1x2
4
3. System Connection
3.1 Usage Precautions
System should be installed in a clean environment and has a prop temperature
and humidity.
All of the power switches, plugs, sockets and power cords should be insulated and
safe.
All devices should be connected before power on.
3.2 System Diagram
The following diagram illustrates typical input and output connections that can be utilized with VDA-12:
OUT 2
OUT 1
IN
DC 5V
7
4K HDMI Splitter 1x2
5
3.3 Connection Procedures
Step1. Connect a HDMI/ DVI source device (e.g. Blue-ray DVD) to the IN socket of
VDA-12 with HDMI cable.
Step2. Connect HDMI displays to OUT 1 and OUT 2 sockets of VDA-12 with HDMI
cables.
Step3. Plug a DC 5V 2A power adapter to the power port of VDA-12. Note: All the ports support hot-plug. Its important to know that hot plugging a display
may result in splash screen at output ends.
3.4 EDID Management
VDA-12 comprises 1 HDMI input port & 2 HDMI output ports, and it possess built-in EDID management function.
When all output ports are connected with displays, the source device will gain the
EDID data from the display connected output 1 port. At this point, if you disconnect the output 1 display and want the source device to gain the EDID from the output 2, the VDA-12 need to be restarted.
All connected displays should be compatible, for example: when output 1 connects
with a 1080p display, VDA-12 will select 1080p as output resolution and distribute 1080p signal to displays connected to output 1~2. If the display connected to output 2 dont support 1080p signal, there will be no output on the display.
3.5 Application
VDA-12 has a good application in various occasions, such as computer realm, monitoring, conference room, big screen displaying, television education, command & control center and smart house etc.
4K HDMI Splitter 1x2
6
4. Specification
Video Input
Input
1 HDMI
Input Connector
1 female type A HDMI 2.0
Video Output
Output
2 HDMI
Output Connector
1 female type A HDMI 2.0
Video General
Max data rate
18Gbit/s
Max Resolution
4Kx2K@60Hz 4:4:4
HDCP
Compliant with HDCP2.2,and is backward compatible to HDCP1.4
EDID
In-built EDID management
HDMI Embedded Audio
Support Dolby D (True HD)/ DTS (HD-Master Audio)/ PCM
General
Temperature
0~ 55
Reference Humidity
10% ~ 90%
Power Supply
Input:100V~240V AC Output: DC5V 2A
Power Consumption
4.5W(Max)
Weight
97g
Dimension (W*H*D)
102mmx 11mmx 70mm
4K HDMI Splitter 1x2
7
Supported Input Video Formats
Input Resolution
HDMI
DVI
720 x 480@60Hz

720 x 480I@30Hz

720 x 576@50Hz

720 x 576I@25Hz

1280 x720@50Hz

1280 x720@60Hz

1920 x 1080@25Hz

1920 x 1080@50Hz

1920 x 1080@60Hz

1920 x 1080I@25Hz

1920 x 1080I@30Hz

3840 x 2160@25Hz

3840 x 2160@30Hz

3840 x 2160@60Hz

1080P 3D@60Hz

Note: VDA-12 supports 4k& 3D HDMI signals, please adopt quality HDMI cables compliant with HDMI2.0 for better transmission when connecting 4K or 3D sources.
4K HDMI Splitter 1x2
8
5. Panel Drawing
OUT 2
OUT 1
IN
IN
DC 5V
2
1
VDA-12
HDMI2.0 & HDCP2.2
1
70 m
m
11 m
m
102 mm
4K HDMI Splitter 1x2
9
6. Troubleshooting & Maintenance
Problems
Potential Causes
Solutions
Color losing or no video signal output in HDMI display
The connecting cables may not be connected correctly or it may be broken.
Check whether the cables are connected correctly and in working condition.
The display is not compatible with the present output resolution.
Make sure the resolution of the display(s) is compatible with the present resolution.
No HDMI signal output in VDA-12 while local HDMI input is in normal working state
The connecting cables may not be connected correctly or it may be broken.
Check whether the cables are connected correctly and in working condition.
Splash screen in output devices
Poor quality of the connecting cable
Change for another cable of good quality.
Static becomes stronger when connecting the video connectors
Bad grounding
Check the grounding and make sure it is connected well.
If your problem persists after following the above troubleshooting steps, seek further help from authorized dealer or our technical support.
4K HDMI Splitter 1x2
10
7. Customer Service
The return of a product to our Customer Service implies the full agreement of the terms and conditions hereinafter. There terms and conditions may be changed without prior notice.
Warranty
The limited warranty period of the product is fixed 3 (three) years.
Scope
These terms and conditions of Customer Service apply to the customer service provided for the products or any other items sold by authorized distributor only.
Warranty Exclusions:
Warranty expiration. Factory applied serial number has been altered or removed from the product. Damage, deterioration or malfunction caused by:
Normal wear and tear. Use of supplies or parts not meeting our specifications. No certificate or invoice as the proof of warranty. The product model showed on the warranty card does not match with the
model of the product for repairing or had been altered.
Damage caused by force majeure. Servicing not authorized by distributor. Any other causes which does not relate to a product defect.
Shipping fees, installation or labor charges for installation or setup of the product.
Documentation:
Customer Service will accept defective product(s) in the scope of warranty coverage at the sole condition that the defeat has been clearly defined, and upon reception of the documents or copy of invoice, indicating the date of purchase, the type of product, the serial number, and the name of distributor.
Remarks: For further assistance or solutions, please contact your local distributor.
Remote Technologies Incorporated
5775 12th Avenue East, Suite 180
Shakopee, MN 55379
Tel: 952-253-3100
Fax: 952-253-3131
www.rticorp.com
Loading...