KX10
10” In-Wall Controller
Quick Reference Guide
With a commanding presence and sophisticated style, the KX10 delivers the world of control and automation in residential and
commercial settings. Simplifying and enhancing the control experience, the large 10” widescreen display is programmable to
the nest detail and provides ample screen real estate for the ultimate custom user interface. The KX10’s advanced engineering
makes it much more than a control device – it’s also a high-resolution display that offers a convenient place for viewing HD video,
checking security cameras, and answering the door via the built-in video intercom. Capable of direct control over devices, the
KX10 can also be incorporated into the powerful RTI ecosystem to take advantage of cutting-edge automation. With the KX10,
anything is possible with a simple touch.
Features:
• A large 10.1” widescreen LCD with 1280x800 (WXGA) resolution and integrated capacitive touchscreen.
• The completely customizable touchpanel provides simple, intuitive control with programming that can be tailored to
each installation.
• Display HD video via the integrated HDBaseT video input.
• Display analog video sources such as security cameras via the composite video input.
• Ability to function as a part of an RTI control system for powerful two-way control or control devices directly through
built-in infrared and RS-232 ports.
• The proximity sensor automatically wakes the unit as a user approaches.
• The ambient light sensor adjusts the backlighting.
• Integrated 10/100 Base-T (with PoE+) and 802.11b/g/n wireless Ethernet for viewing video from IP security cameras,
enhanced two-way feedback and remote programming updates.
• Video intercom capability with built-in camera, microphone, and speakers.
• Powered by a separate power supply, an RTI CB8 connecting block or PoE+ (Power over Ethernet Plus).
• Stylish low-prole faceplate available in white, black or brushed aluminum (ships with white).
Touchscreen Control Panel
REV
ECO
REVISION RECORD
DESCRIPTION
DRFT
C
D
12345678
DATE
01 ----- ----- PRELIMINARY RELEASE DRF
RESET
ETHERNET
EXPANSION
PORT 1 PORT 2 PORT 3
PORT 4
PORT 5
PORT 6
+
+ +
+ +
+
USB
RTI COM
POWER
STATUS
RS-232
POWER / IR
+12VDC TRIGGER
+3-24VDC SENSE
RELAYS (+30VDC, 5A MAX)
IR OUTPUT LEVEL
1
2
Model XP-6
Advanced Control Processor
0.750SCALE
Connection Options
The following diagram shows the KX10 connection options in a typical installation, including an RTI control processor (RTI XP-6 shown) and
an RTI connecting block (RTI CB-8 shown).
Mounting Wings (2)
Video Matrix Switch/
HDBaseT Transmitter
HDBT OUTHDMI OUTHDMI INIR RX
HDBT OUTHDMI OUTHDMI INIR RX
HDBT OUTHDMI OUTHDMI INIR RX
HDBT OUTHDMI OUTHDMI INIR RX
HDBT OUTHDMI OUTHDMI INIR RX
HDBT OUTHDMI OUTHDMI INIR RX
AC 100~240V
FUSE: T5AL 250V
RJ-45>DB-9
Adapter
RS-232 Controlled Device
(Ex. Video Projector)
(Wing located on bottom of KX10 also)
Video Source
(Ex. Security Camera)
HDBT OUTHDMI OUTHDMI INIR RX
HDBT OUTHDMI OUTHDMI INIR RX
ETHERNET RS-232
IR CTRL
EDID
DEFAULT
ON
OFF
Remote Technologies Incorporated
Model
P/N
S/N
VHD-8
10-210510-10
Composite Video
HDBaseT Video
RS-232 Port
(Cat-5 cable)
Control Port
(Cat-5 cable)
Control Port
(Pinout)
Pin 8
CB-8 Connecting Block
Ground
Ground
Infrared
+12 to +16 VDC
+12 to +16 VDC
Infrared
RS-485-
RS-485+
Pin 7
Pin 6
Pin 5
Pin 4
Pin 3
Pin 2
Pin 1
KX10 (Rear)
Ethernet
(Cat-5 cable)
Ethernet Network
Router or Switch
XP-6 Control Processor
KX10 Front (Bezel removed)
Mounting Wing
Screws
Camera
Ambient Light and Proximity Sensors
Speaker
Speaker
Reset Button
MicrophoneUSB Port
It’s Under Control
REMOTE TECHNOLOGIES INC.
[30.99mm]
Installation & Operation
MOUNTING
The KX10 is designed for ush-mount, in-wall installations. It requires an available mounting depth of 2 inches (52.5mm) from the surface of the wall.
IMPORTANT NOTE: There is little margin for error when tting the KX10 into the wall opening.
Make sure to use the included cardboard cut-out template to create the correct size opening in the wall. Additionally, carefully double-check that all measurements taken
using the cardboard cut-out template are accurate.
MOUNTING HEIGHT
The recommended mounting height for the KX10 is between 54 inches (1.37m) and 60 inches (1.52m) from the bottom of the faceplate.
MOUNTING WINGS
The two mounting wings are located on the top and bottom of the KX10 can be used to secure the unit to drywall in retrot installations. Place the KX10 in the opening in
the wall and tighten the mounting wing screws located on the front of the unit (bezel removed).
CONDUIT BOX
For new construction installations a conduit box may be purchased separately from an RTI distributor. Refer to the conduit box installation guide for instructions.
®
DIMENSIONS
POWER OPTIONS
CB-8 Connecting Block: Wire a Cat-5 cable from the KX10 Control Port to the CB-8 Connecting Block (see diagram).
Ethernet Port (Power over Ethernet): Wire a Cat-5 cable from the KX10 Ethernet Port to an 802.3at compliant Power-over-Ethernet switch (Class #4).
NOTE: Using a non-compliant PoE device may damage the KX10.
Power Supply: Connect a power supply (+12VDC to +16VDC, 1.6A ) to the KX10 Control Port using an RJ45 connection. Connect the power supply leads to the +12VDC-16VDC and
Ground Pins. (See diagram on previous page for pinout).
CONNECTIONS
COMPOSITE VIDEO INPUT
The Composite Video Input uses a BNC jack and supports video sources such as a security camera or a cable box.
HDBASET VIDEO INPUT
The HDBaseT Video Input allows HD video to be delivered to the KX10 via a Cat-5 cable with an RJ-45 termination from an HDMI video matrix switch with an HDBaseT
video output or an HDBaseT transmitter.
CONTROL PORT
The Control Port on the KX10 uses a Cat-5 cable with RJ-45 termination. When used in conjunction with an RTI control processor (e.g. RTI XP-6) and an RTI connecting
block (e.g. RTI CB-8), this port serves as the power source for the KX10 in addition to infrared and RS-485 communication.
ETHERNET PORT
The KX10 Ethernet Port is for connection to a LAN via Cat-5 cabling with RJ-45 termination and supports PoE+ (Power over Ethernet Plus). When powering the KX10
using PoE+, wire a Cat-5 cable from the KX10 Ethernet Port to an 802.3at compliant Power-over-Ethernet Plus switch (Class #4).
NOTE: Using a non-compliant PoE device may damage the KX10.
RS-232
The KX10 is capable of direct RS-232 communication using a Cat-5 cable with RJ-45 termination. A DB9 - RJ45 adaptor is included for connection to the device being
controlled (See below for adapter pinout).
NOTE: RS-232 communication should be limited to 50 feet (16m) depending on baud rate.
DB-9
Pin Signal Signal
Name Description
1 DCD Carrier Detect
2 RXD Receive Data
3 TXD Transmit Data
4 DTR Data Terminal Ready
5 GND Signal Ground/Common
6 DSR Data Set Ready
7 RTS Request To Send
8 CTS Clear To Send
9 NC Not Connected
KX10 (Rear View) KX10 (Bezel)
10.204”
[259.18mm]
7.353”
[186.77mm]
11.238”
[285.45mm]
DB9 - RJ45 ADAPTOR PINOUT
7.920”
[201.17mm]
RJ-45 (KX10 RS-232 Output)
Pin Signal Signal
Name Description
1 DSR Data Set Ready
2 DCD Carrier Detect
3 DTR Data Terminal Ready
4 GND Signal Ground/Common
5 RXD Receive Data
6 TXD Transmit Data
7 CTS Clear To Send
8 RTS Request To Send
KX10 (Side View)
1.445”
[36.7mm]
1.220”
PROGRAMMING
THE TOUCHSCREEN DISPLAY
The KX10 touchscreen display is programmed using the RTI Integration Designer Programming Software. Normally it is organized into a series of pages containing
objects (buttons, text, graphics, etc.) that are related to each other. For example, they may all display information necessary for controlling a particular music server.
UPDATING FIRMWARE
It is highly recommended that this and all RTI products have the latest rmware installed. The rmware can be found in the Dealer section of the RTI website (www.
rticorp.com). Install the rmware using a USB cable (USB A to Mini B).
UPDATING SOFTWARE
RTI’s Integration Designer data les can be downloaded to the KX10 using a USB cable (USB A to Mini B), or via an Ethernet network (hard-wired or wireless). Also, if the
KX10 is hard-wired to a LAN and the router has DHCP enabled, the initial data le download can be made over the Ethernet network.
CONTROL PANEL
Certain settings can be adjusted directly on the KX10 through the control panel. Please note that changes made directly in the KX10 control panel will be overwritten by
changes made in Integration Designer.
Adjustable settings: Display Backlight and Sensors • Set Clock • Time Out • Sound • Calibrate Touchscreen • Network Information • VOIP Intercom
Access to the Control Panel: Assign a “Control Panel” page link to a button in the Integration Designer
®
programming software.
It’s Under Control
®
Product Contents
• One (1) KX10 In-Wall Touchpanel Keypad
• One (1) Bezel (White)
• Four (4) Mounting Wings (two preinstalled)
• One (1) RJ45 to DB9 Serial Adapters
• One (1) MAC Address Card
• One (1) Drywall Cutout Template
• One (1) Quick Reference Guide
Safety Suggestions
Read and Follow Instructions. Read all safety and operating instructions before
operating the unit.
Retain Instructions. Keep the safety and operating instructions for future
reference.
Heed Warnings. Adhere to all warnings on the unit and in the operating
instructions.
Heat. Keep the unit away from heat sources such as radiators, heat registers,
stoves, etc., including ampliers that produce heat.
Power Sources. Connect the unit only to a power supply of the type described in
the operating instructions, or as marked on the unit.
Power Cord Protection. Route power supply cords so that they are not likely
to be walked on or pinched by items placed on or against them, paying particular
attention to the cord plugs at power receptacles and at the point at which they exit
from the unit.
Water and Moisture. Do not use the unit near water—for example, near a sink, in
a wet basement, near a swimming pool, near an open window, etc.
Object and Liquid Entry. Do not allow objects to fall or liquids to be spilled into
the enclosure through openings.
Servicing. Do not attempt any service beyond that described in the operating
instructions. Refer all other service needs to qualied service personnel.
Damage Requiring Service. The unit should be serviced by qualied service
personnel when:
The power supply cord or the plug has been damaged.
Objects have fallen or liquid has been spilled into the unit.
The unit has been exposed to rain.
The unit does not appear to operate normally or exhibits a marked change in
performance.
The unit has been dropped or the enclosure has been damaged.
Cleaning
To clean your KX10, lightly dampen a lint-free cloth with plain water or a mild detergent
and wipe the touchscreen, keypad and outer surfaces.
NOTE: Do not use harsh chemicals as damage to the unit may occur.
Contacting RTI
For news about the latest updates, new product information, and new accessories,
please visit our web site at:
www.rticorp.com
For general information, you can contact RTI at:
Remote Technologies Incorporated
5775 12th Ave. E Suite 180
Shakopee, MN 55379
Tel. (952) 253-3100
Fax (952) 253-3131
info@rticorp.com
Service & Support
If you are encountering any problems or have a question about your RTI product, please
contact RTI Technical Support for assistance (see the Contacting RTI section of this guide for
contact details).
RTI provides technical support by telephone or e-mail. For the highest quality service, please
have the following information ready:
• Your Name
• Company Name
• Telephone Number
• E-mail Address
• Product model and serial number (if applicable)
If you are having a problem with hardware, please note the equipment in your system, a
description of the problem, and any troubleshooting you have already tried.
*Please do not return products to RTI without return authorization.*
Limited Warranty
RTI warrants its products for a period of one (1) year (90 days only for included battery
packs); or for a period of time compliant with local laws when applicable from the date
of purchase from RTI or an authorized RTI distributor.
This warranty may be enforced by the original purchaser and subsequent owners
during the warranty period, so long as the original dated sales receipt or other proof of
warranty coverage is presented when warranty service is required.
Except as specied below, this warranty covers all defects in material and workmanship
in this product. The following are not covered by the warranty.
Damage resulting from:
1. Accident, misuse, abuse, or neglect.
2. Failure to follow instructions contained in this Guide.
3. Repair or attempted repair by anyone other than Remote Technologies
Incorporated.
4. Failure to perform recommended periodic maintenance.
5. Causes other than product defects, including lack of skill, competence or
experience of user.
6. Shipment of this product (claims must be made to the carrier).
7. Being altered or which the serial number has been defaced, modied or removed.
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. Any changes or modications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the device.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received including interference that may cause undesired operation.
Industry Canada Compliance Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received including interference that may cause undesired operation.
Cet appareil est conforme avec Industrie Canada exempts de licence standard RSS (s). Son fonctionnement est soumis aux deux conditions suivantes:
1. Ce dispositif ne peut causer des interférences nuisibles.
2. Cet appareil doit accepter toute interférence reçue y compris des interférences qui peuvent provoquer un fonctionnement indésirable.
Contains FCC ID: MMURTI2100
Contains IC (Canada): 3166A-RTI2100
DECLARATION OF CONFORMITY (DOC)
The Declaration of Conformity for this product can be found on the RTI website at: www.rticorp.com/declaration
Copyright © 2016 • Remote Technologies Incorporated • All rights reserved. 70-210157-23 V1.0
N27917
Loading...