RTI CX7 Quick Reference Manual

CX7

Table Top Controller

Quick Reference Guide

CX7 Inverted

CX7 Rear View

CX7 Display Tilted 10°

From the kitchen table top to the conference room, the hard wired CX7 is perfect wherever “always on”, intuitive control

is required. The 7” LCD touchpanel has adjustable tilt, allowing the display to be angled straight up to nearly at. The

CX7 can even be mounted inverted under a cabinet. Additional features include wired and wireless Ethernet for two-way

control, digital video (motion JPEG) and web browsing, while analog audio/video inputs and stereo speakers provide video

viewing from sources such as satellite TV or security cameras.

The CX7 provides superior quality and reliability as well as these features:

• 800x480 WVGA LCD with integrated multi-touch capacitive touchscreen.

• Composite, S-video and component input for viewing video at 480i, 576i, 480p or 576p.

• Analog audio input and stereo speakers.

• Integrated 10/100 Base-T and 802.11 Wireless Ethernet.

• Built-in high output IR for direct control of devices through an IR connecting block.

• Powered using power supply or PoE (Power over Ethernet).

• Proximity and ambient light sensors automatically wake the unit up and adjust the brightness upon being approached.

• Optional modules/processors provide advanced two-way control of electronics such as media servers, lighting and more.

• USB and Ethernet (hard-wired or wireless) software program updates.

• Adjustable tilt display (from 10°-90°) or CX7 can be mounted inverted under a cabinet.

Touchscreen Control Panel

RESET

ETHERNET

EXPANSION

PORT 1 PORT 2 PORT 3

PORT 4

PORT 5

PORT 6

+

+ +

+ +

+

USB

RTI COM

POWER

STATUS

RS-232

POWER / IR

+12VDC TRIGGER

+3-24VDC SENSE

RELAYS (+30VDC, 5A MAX)

IR OUTPUT LEVEL

1
2

Model XP-6
Advanced Control Processor

Connection Options

The following diagram shows a “control
system operation” of the CX7, which

utilizes an RTI control processor (RTI
XP-6 shown) and an RTI connecting
block (RTI CB-8 shown).

CX7 (Rear - Underside)

Power On/Off

Switch

CX7 Control Port

NOTE: The CX7 Control Port may be

used for powering the CX7 with the
included power supply, or it can be

wired to a CB8 (shown below) for

power and control options.

Control Port

(Cat-5 cable)

CB-8 Connecting Block

Control Port

(Pinout)

Ground
Ground

Infrared
+12 to +16 VDC
+12 to +16 VDC

Infrared

RS-485-

RS-485+

Pin 8

Pin 7

Pin 6
Pin 5
Pin 4
Pin 3
Pin 2
Pin 1

Ethernet

(Cat-5 cable)

USB Port

Audio

Video 3 (Pb/C)

Video 2 (Y)

Video 1 (Pr)

Video Source

(Ex. Satellite Tuner, DVD Player)

Ethernet Network

Router or Switch

* 802.3af Compliant PoE Device (Class #3)

XP-6 Control Processor

CX7 (Front) CX7 (Side)

Camera

Touchscreen

Display

Ambient Light &

Proximity Sensors

Rotatable RTI Logo

TO INSTALL: Insert the RTI logo

mounting posts into the holes
on the front of the CX7 in the

proper orientation depending on

the installation type (table top or

inverted).

RTI Logo Backside

(Mounting posts shown)

Tilting the CX7 Display

The CX7 display tilts between 10° and 90° by simply

pushing or pulling it into to the desired position.

NOTE: Forcing the display past these angles may result

in damage to the unit.

90°

10°