CX10
Countertop/Under Cabinet Controller
Quick Reference Guide
CX10 Inverted
CX10 - Tilted 90°
CX10 - Tilted 10°
From the executive boardroom to the gourmet kitchen, the versatile CX10 touchpanel delivers simple, intuitive control of
the environment and entertainment. The sleek unit can be set on a countertop or inverted and mounted under a cabinet,
providing custom control on its 10-inch, high-resolution LCD touchscreen. The CX10 is also a high-quality HD video display
with its integrated HDBaseT input and stereo speakers. Additional user-friendly features include video intercom support and
a built-in composite input for viewing video from security cameras and other devices. The CX10’s large display features a
tilt range from 10 degrees to 90 degrees for the best viewing angle possible in countertop and under-cabinet installations.
The touchpanel is programmable to the nest detail via RTI’s Integration Designer
create the ultimate custom user interface. The result is an elegant and sophisticated control solution that allows users to
effortlessly engage with their surroundings.
The CX10 provides superior quality and reliability as well as these features:
• A 10.1” widescreen LCD with 1280x800 (WXGA) resolution and integrated capacitive touchscreen.
• Displays HD video via the integrated HDBaseT video input.
• Analog audio input and stereo speakers.
• Integrated 10/100 Base-T and 802.11 Wireless Ethernet.
• Built-in high output IR for direct control of devices through an IR connecting block.
• Powered using power supply or PoE+ (Power over Ethernet Plus).
• Proximity and ambient light sensors automatically wake the unit up and adjust the brightness upon being approached.
• Video intercom capability available via the built-in camera, microphone, and speakers.
• USB and Ethernet (hard-wired or wireless) software program updates.
• Adjustable tilt display (from 10°-90°) and CX10 can be inverted and mounted under a cabinet.
®
software, allowing integrators to easily
Connection Options
RESET
ETHERNET
EXPANSION
PORT 1 PORT 2 PORT 3
PORT 4
PORT 5
PORT 6
+
+ +
+ +
+
USB
RTI COM
POWER
STATUS
RS-232
POWER / IR
+12VDC TRIGGER
+3-24VDC SENSE
RELAYS (+30VDC, 5A MAX)
IR OUTPUT LEVEL
1
2
Model XP-6
Advanced Control Processor
The following diagram shows a “control system
operation” of the CX10, which utilizes an RTI
control processor (RTI XP-6 shown).
Power On/Off
Switch
CX10 Control Port
NOTE: The Control Port may be used for powering the
CX10 with the included power supply, or it can be wired to
a CB-8 (shown below) for power and control options.
CX10 Power Supply
NOTE: The p
supply is equipped
with an RJ-45 jack to
allow a Cat-5 cable to
be extended from the
power supply to the
location of the CX10.
ower
CX10 (Rear - Underside)
USB Port
CB-8 Connecting Block
Control Port (Cat-5 cable)
Control Port (Pinout)
XP-6 Control Processor
Camera
Touchscreen
Display
RS-485-
RS-485+
Infrared
+12 to +16 VDC
+12 to +16 VDC
Infrared
Ground
Ground
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
Composite Video
HDBaseT Video
Ethernet
(Cat-5 cable)
Tilting the CX10 Display
The CX10 display tilts between 10° and 90° by pushing or
pulling it into to the desired position.
NOTE: Forcing the display past these angles may damage
the unit.
Audio
Audio Source
(Ex. Satellite Tuner)
Video Source
(Ex. Security Camera,
Satellite Tuner)
HDBT OUTHDMI OUTHDMI INIR RX
HDBT OUTHDMI OUTHDMI INIR RX
HDBT OUTHDMI OUTHDMI INIR RX
HDBT OUTHDMI OUTHDMI INIR RX
HDBT OUTHDMI OUTHDMI INIR RX
AC 100~240V
FUSE: T5AL 250V
HDBT OUTHDMI OUTHDMI INIR RX
HDBT OUTHDMI OUTHDMI INIR RX
HDBT OUTHDMI OUTHDMI INIR RX
ETHERNET RS-232
IR CTRL
Remote Technologies Incorporated
Model
P/N
VHD-8
10-210510-10
Video Matrix Switch or
HDBaseT Transmitter
Ethernet Router/Switch
* 802.3at Compliant PoE+ Device (Class #4)
90°
EDID
DEFAULT
ON
OFF
S/N
CX10 (Front) CX10 (Side)
Ambient Light &
Proximity Sensors
TO INSTALL: Insert the RTI logo
mounting posts into the holes
on the front of the CX10 in the
proper orientation depending on
the installation type (table top or
(Mounting posts shown)
Rotatable RTI Logo
10°
inverted).
RTI Logo Backside
It’s Under Control
Mounting
MOUNTING
The CX10 is designed to be hard-wired (with power, video, Ethernet, etc.) and installed upright on a table or countertop. Additionally, the CX10 can be mounted inverted
under a cabinet using the included mounting bracket.
COUNTERTOP INSTALLATION
1. Place CX10 on a table or countertop - no mounting bracket required.
2. Install necessary wiring and the “RTI” logo in the proper orientation.
IMPORTANT NOTE:
Under normal operating conditions, when the CX10 is displaying video via the HDBaseT input,
there is the potential for heat buildup on the underside of the unit reaching temperatures
of 130°F/55°C. The CX10 is equipped with a fan and cooling vents to aid in heat dissipation
while video is playing. Extra precautions such as a mat may also be added to protect the
table/countertop surface from potential damage due to prolonged heat exposure.
1. The cooling fan is only active when HDBaseT video is in use.
2. Regular cleaning of the cooling/fan vents is recommended to prevent dust build up.
3. Do not block the cooling and fan intake vents.
UNDER CABINET (INVERTED) - INSTALLATION
1. Position the CX10 mounting bracket set back one inch from the front edge of a cabinet
underside using the “Front” label/arrow for proper orientation.
2. Attach the bracket using four #8 pan head fasteners* installed through the four mounting
holes. Tighten until snug - do not over tighten.
3. Place the CX10 bottom side up, screen facing out and orient the grooves on the underside
of the unit over the mounting bracket alignment tabs.
4. Once aligned, push up on the CX10 to insert the mounting bracket tabs into the grooves
then pull the unit forward (toward you) until the unit snaps into place.
5. Install necessary wiring and the “RTI” logo in the proper orientation.
NOTE: Depending on the installation, the type and length of fastener used may vary.
UNDER CABINET (INVERTED) - REMOVAL
1. Remove all wiring.
2. Press and hold up the two mounting bracket release tabs on the rear of the bracket.
3. With one hand supporting the weight of the CX10, push the unit backward (away from
you) until it disengages from the bracket.
CX10 - Rear View
Cooling Vents (2)
Fan Intake Vent
CX10 - Inverted Installation
Release Tabs (2)
Mounting Holes (4)
Alignment Grooves (2)
®
Installation & Operation
POWERING THE CX10
A) 12VDC/2A Power Supply: The power supply is equipped with an RJ-45 jack to allow a Cat-5 cable to be extended from the power supply to the location of the CX10.
Plug a Cat-5 cable into the CX10 Control Port and extend the cable to the location of the power supply, then plug the power supply into a AC wall outlet.
Or
B) CB-8 Connecting Block: Wire a Cat-5 cable from the CX10 Control Port to the RTI CB-8 Connecting Block (see diagram).
Or
C) Ethernet Port (Power over Ethernet Plus): Wire a Cat-5 cable from the CX10 Ethernet Port to an 802.3at compliant Power-over-Ethernet switch (Class #4).
CAUTION: Using a non-compliant PoE device may damage the CX10.
CONNECTIONS
CONTROL PORT
The Control Port (RJ-45 Jack) may be used for powering the CX10 via the included power supply (see Powering The CX10 section) or wired to an RTI CB-8 connecting block
for power and control options via the RTI control system. Additionally, the control port provides an infrared output for direct control of devices via IR.
ETHERNET PORT
The Ethernet port (RJ-45 Jack) is for connection to an Ethernet network via Cat-5 cabling. The CX10 may also be powered via the Ethernet port when a Power over Ethernet
Plus Switch is used. Additionally, the CX10 supports wireless Ethernet, which is congured in Integration Designer.
HDBASET VIDEO INPUT
The HDBaseT video input (RJ-45 Jack) allows HD video to be delivered to the CX10 via a Cat-5 cable from HDBaseT compatible devices such as a matrix switch or an
HDBaseT transmitter.
COMPOSITE VIDEO INPUT
The Composite video input (BNC Jack) supports video sources such as a security camera or a satellite tuner.
AUDIO INPUT
The audio input (3.5mm Jack) functions as a stereo audio input to be played on the CX10 internal speakers.
USB PORT
The USB port allows Integration Designer data les and rmware to be downloaded to the CX10 using a USB cable (USB A to Mini B).
PROGRAMMING
THE TOUCHSCREEN DISPLAY
The CX10 touchscreen display is programmed using the Integration Designer Programming Software. Normally it is organized into a series of pages containing objects
(buttons, text, graphics, etc.) that are related to each other such as a music server, satellite TV, lighting, security etc.
ADJUSTING CX10 INTERNAL SPEAKER VOLUME
The CX10 internal speaker’s volume level can be adjusted by programming buttons on the touchscreen with volume adjustment objects in Integration Designer.
UPDATING FIRMWARE
It is highly recommended that this and all RTI products have the latest rmware installed. The rmware can be found in the Dealer section of the RTI website (www.rticorp.
com). Install the rmware using a USB cable (USB A to Mini B).
UPDATING SOFTWARE
RTI’s Integration Designer data les can be downloaded to the CX10 using a USB cable (USB A to Mini B), or via hard-wired or wireless Ethernet. If the CX10 is hard-wired
to a LAN and the router has DHCP enabled, the initial data le can be made over Ethernet.
THE CX10 CONTROL PANEL
The CX10 has many settings that can be adjusted directly on the unit through the control panel. Please note that changes made directly in the CX10 control panel will be
overwritten by changes made in Integration Designer.
Adjustable settings: Display (Backlight Level/Inverted Mode) • Set Clock • Time Out • Sound • Calibrate Touchscreen • Network Information • VOIP Intercom
Access the Control Panel page: Assign a “Control Panel” page link to a button in the Integration Designer programming software.
NOTE: It is not possible to access the Control Panel by resetting the CX10 and pressing the touchscreen.
It’s Under Control
®
Product Contents
• One (1) CX10 Countertop/Undercabinet Controller
• One (1) International power supply kit with RJ-45 connector
• One (1) Rotatable RTI Logo
• One (1) Mounting bracket
• One (1) Quick reference guide
• One (1) Firmware update notication
Safety Suggestions
Read and Follow Instructions. Read all safety and operating instructions before
operating the unit.
Retain Instructions. Keep the safety and operating instructions for future reference.
Heed Warnings. Adhere to all warnings on the unit and in the operating instructions.
Heat. Keep the unit away from heat sources such as radiators, heat registers, stoves, etc.,
including ampliers that produce heat.
Power Sources. Connect the unit only to a power supply of the type described in the
operating instructions, or as marked on the unit.
Power Cord Protection. Route power supply cords so that they are not likely to be
walked on or pinched by items placed on or against them, paying particular attention to the
cord plugs at power receptacles and at the point at which they exit from the unit.
Water and Moisture. Do not use the unit near water—for example, near a sink, in a wet
basement, near a swimming pool, near an open window, etc.
Object and Liquid Entry. Do not allow objects to fall or liquids to be spilled into the
enclosure through openings.
Servicing. Do not attempt any service beyond that described in the operating instructions.
Refer all other service needs to qualied service personnel.
Damage Requiring Service. The unit should be serviced by qualied service personnel
when:
The power supply cord or the plug has been damaged.
Objects have fallen or liquid has been spilled into the unit.
The unit has been exposed to rain.
The unit does not appear to operate normally or exhibits a marked change in
performance.
The unit has been dropped or the enclosure has been damaged.
Cleaning
To clean your CX10, lightly dampen a lint-free cloth with plain water or a mild detergent
and wipe the touchscreen, keypad and outer surfaces.
NOTE: Do not use harsh chemicals as damage to the unit may occur.
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. Any
changes or modications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the device.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in
a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received including interference that may
cause undesired operation.
Industry Canada Compliance Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received including interference that may
cause undesired operation.
Cet appareil est conforme avec Industrie Canada exempts de licence standard RSS (s).
Son fonctionnement est soumis aux deux conditions suivantes:
1. Ce dispositif ne peut causer des interférences nuisibles.
2. Cet appareil doit accepter toute interférence reçue y compris des interférences qui
peuvent provoquer un fonctionnement indésirable.
Contains FCC ID: MMURTI2100
Contains IC (Canada): 3166A-RTI2100
Contacting RTI
For news about the latest updates, new product information, and new accessories, please visit
our web site at: www.rticorp.com
For general information, you can contact RTI at:
Remote Technologies Incorporated
5775 12th Ave. E Suite 180
Shakopee, MN 55379
Tel. (952) 253-3100
Fax (952) 253-3131
info@rticorp.com
Service & Support
If you are encountering any problems or have a question about your RTI product, please
contact RTI Technical Support for assistance (see the Contacting RTI section of this guide for
contact details).
RTI provides technical support by telephone or e-mail. For the highest quality service, please
have the following information ready:
• Your Name
• Company Name
• Telephone Number
• E-mail Address
• Product model and serial number (if applicable)
If you are having a problem with hardware, please note the equipment in your system, a
description of the problem, and any troubleshooting you have already tried.
*Please do not return products to RTI without return authorization.*
Limited Warranty
RTI warrants new products for a period of three (3) years (excluding consumables
such as rechargeable batteries which are warrantied for one (1) year) from the date of
purchase by the original purchaser (end user) directly from RTI / Pro Control (herein
referred to as “RTI”), or an authorized RTI dealer.
Warranty claims may be initiated by an authorized RTI dealer using the original dated
sales receipt or other proof of warranty coverage. In the absence of the receipt of
purchase from the original dealer, RTI will provide warranty coverage extension of six
(6) months from the date code of the product. Note: RTI warranty is limited to the
provisions set forth in this policy and does not preclude any other warranties offered by
third parties who are solely responsible for those other warranties.
Except as specied below, this warranty covers defects in product material and
workmanship. The following are not covered by the warranty:
• Product purchased via unauthorized sellers or internet sites will not be servicedregardless of purchase date.
• Damages caused by accident, misuse, abuse, neglect or acts of God.
• Cosmetic damage, including, but not limited to, scratches, dents and normal wear
and tear.
• Failure to follow instructions contained in the Product Installation Guide.
• Damages due to products used in an application or environment other than that for
which it was intended, improper installation procedures or adverse environmental
factors such as incorrect line voltages, improper wiring, or insufcient ventilation.
• Repair or attempted repair by anyone other than RTI and Pro Control or authorized
service partners.
• Failure to perform recommended periodic maintenance.
• Causes other than product defects, including lack of skill, competence or
experience of user.
• Damage due to shipment of this product (claims must be made to the carrier).
• Altered unit or altered serial number: defaced, modied or removed.
RTI Control is also not liable for:
• Damages caused by its products or for failure of its products to perform, including
any labor costs, lost prots, lost savings, incidental damages, or consequential
damages.
• Damages based upon inconvenience, loss of use of the product, loss of time,
interrupted operation, commercial loss, any claim made by a third party or made
on behalf of a third party.
• Loss of, or damage to, data, computer systems or computer programs.
RTI’s liability for any defective product is limited to repair or replacement of the
product, at the sole discretion of RTI.
In cases where the warranty policy conicts with local laws, the local laws will be
adopted.
DECLARATION OF CONFORMITY (DOC)
The Declaration of Conformity for this product can be found on the RTI website at:
www.rticorp.com/declaration
Copyright © 2017 • Remote Technologies Incorporated • All rights reserved. 70-210161-18 V1.1
Loading...