RTI CP-1650 Installation & Operation Manual
1
It’s Under Control
®
CP-1650
Installation and Operation Guide
70-210098-27 V1.0
Cool Power® Audio Amplier
It’s Under Control
®
Cool Power
Audio Amplier
CP-1650
2
Copyright © 2012
Remote Technologies Incorporated
All rights reserved.
3
It’s Under Control
®
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. Any changes or modications not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the device.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received including
interference that may cause undesired operation.
FEDERAL COMMUNICATIONS COMMISSION NOTICE
N27917
DECLARATION OF CONFORMITY (DOC)
The Declaration of Conformity for this product can be found on the RTI
website at: www.rticorp.com/declaration
Cool Power
Audio Amplier
CP-1650
4
Read Instructions. Read all safety and operating instructions before
operating the unit.
Retain Instructions. Keep the safety and operating instructions for
future reference.
Heed Warnings. Adhere to all warnings on the unit and in the operating
instructions.
Follow Instructions. Install and operate in accordance with the
manufacturer’s instructions.
Accessories. Only use attachments/accessories specied by the
manufacturer.
Portable Cart Warning. Use only with the cart, stand,
tripod, bracket, or table specied by the manufacturer, or
sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid
injury from tip-over.
Heat. Do not block any ventilation openings.
Heat. Keep the unit away from heat sources such as radiators, heat
registers, stoves, etc., including ampliers that produce heat.
Power. Unplug this apparatus during lightning storms or when unused for
long periods of time.
Power Sources. Connect only to the power cord that was included with
the unit.
Power Cord Protection. Route power supply cords so that they are not
likely to be walked on or pinched by items placed on or against them,
paying particular attention to the cords at plugs, at convenient receptacles,
and at the point at which they exit from the unit.
Power Cord Grounding Plug. Do not remove the grounding prong of
the grounding-type plug. A grounding type plug has two blades and a
third grounding prong. The third prong is provided for your safety. If
the provided plug does not t into your outlet, consult an electrician for
replacement of the obsolete outlet.
MAINS Outlet. Where MAINS outlets are used, the apparatus shall be
connected to a MAINS socket outlet with a protective earthing connection.
MAINS Plug. Where the MAINS plug or an appliance coupler is used as
the disconnect device, the disconnect device shall remain readily operable.
Water and Moisture. Do not use the unit near water—for example, near
a sink, in a wet basement, near a swimming pool, near an open window,
etc.
Object and Liquid Entry. Do not allow objects to fall or liquids to be
spilled into the enclosure through openings.
WARNING!
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE.
SAFETY SUGGESTIONS
5
It’s Under Control
®
Cleaning. Clean only with dry cloth.
Servicing. Do not attempt any service beyond that described in the
operating instructions. Refer all other service needs to qualied service
personnel.
Damage Requiring Service. The unit should be serviced by qualied
service personnel when:
Objects have fallen or liquid has been spilled into the unit.
The power supply cord or the plug has been damaged.
The unit does not appear to operate normally or exhibits a marked
change in performance.
The unit has been dropped or the enclosure has been damaged.
SAFETY SUGGESTIONS
Cool Power
Audio Amplier
CP-1650
6
DISCLAIMER
All rights are reserved. No part of this document may be photocopied,
reproduced, or translated without the prior written notice of Remote
Technologies Incorporated.
The information contained in this document is subject to change without
notice. Remote Technologies Incorporated shall not be liable for errors or
omissions contained herein or for consequential damages in connection with
the furnishing, performance, or use of this guide.
CP-1650, Integration Designer, and the RTI logo are registered trademarks of
Remote Technologies Incorporated.
Other brands and their products are trademarks or registered trademarks of
their respective holders.
RTI warrants its products for a period of one (1) year (90 days only for
included battery packs); or for a period of time compliant with local laws
when applicable from the date of purchase from RTI or an authorized RTI
distributor.
This warranty may be enforced by the original purchaser and subsequent
owners during the warranty period, so long as the original dated sales
receipt or other proof of warranty coverage is presented when warranty
service is required. Except as specied below, this warranty covers all
defects in material and workmanship in this product. The following are not
covered by the warranty:
Damage resulting from:
1. Accident, misuse, abuse, or neglect.
2. Failure to follow instructions contained in this Guide.
3. Repair or attempted repair by anyone other than Remote Technologies
Incorporated.
4. Failure to perform recommended periodic maintenance.
5. Causes other than product defects, including lack of skill, competence
or experience of user.
6. Shipment of this product (claims must be made to the carrier).
7. Being altered or which the serial number has been defaced, modied
or removed.
Remote Technologies Incorporated is not liable for any damages caused by
its products or for its failure of its products to perform, including any lost
prots, lost savings, incidental damages, or consequential damages.
Remote Technologies Incorporated is not liable for damages based upon
inconvenience, loss of use of the product, loss of time, interrupted
operation, commercial loss, any claim made by a third party or made by
you for a third party.
Remote Technologies Incorporated’s liability for any defective product is
limited to repair or replacement of the product, at our option.
If any component of your CP-1650 Audio Distribution System needs
service, please contact Remote Technologies Incorporated by telephone,
fax or E-mail for return information. Please do not return products to
Remote Technologies Incorporated without return authorization.
LIMITED WARRANTY
7
It’s Under Control
®
Federal Communications Commission Notice ...............3
Safety Suggestions ...................................................... 4
Limited Warranty ........................................................6
Disclaimer ...................................................................6
Table of Contents ........................................................7
Chapter 1 - Welcome ................................................... 9
- Important Notes..................................................9
- Important Notices to Installers .......................... 10
- Product Contents ................................................11
Chapter 2 - Features and Description .........................12
- Front Panel .........................................................13
- Rear Panel ..........................................................14
Chapter 3 - Installation and Operation .......................17
- Mounting ............................................................ 17
- Connecting Audio Sources .................................. 18
- Speaker Wire Termination .................................. 19
- Controlling the CP-1650 .....................................19
Chapter 4 - Specications ...........................................22
Chapter 5 - Troubleshooting ....................................... 24
Chapter 6 - Service and Support ................................. 25
Index ......................................................................... 27
TABLE OF CONTENTS
Cool Power
Audio Amplier
CP-1650
8
9
It’s Under Control
®
Thank you for using the CP-1650 Audio Distribution System.
The CP-1650 is designed to add more power to an audio distribution
system. Equipped with a 50 Watt per channel Cool Power® Amplier, the
CP-1650 is perfect for installations that require extra speakers for those
bigger rooms and/or adding another room to an audio zone.
The CP-1650 is an ideal complimentary component of an RTI control
system. The CP-1650 provides the amplication for up to sixteen different
channels, while RTI audio distribution systems, central processors and
user interfaces manage the audio source control, user input, and status
feedback. Information such as the selected source, volume level, and
tone control settings are available for each zone. Depending on the source
equipment used, more advanced information such as song playlists,
cover art, and tuner RDS data may also be available. Of course with RTI
control systems, audio is just the beginning. Imagine every aspect of your
environment working in complete harmony – from audio and video to
lighting, ambience, temperature and more. Such scenarios are only made
possible from an audio distribution system backed by a professional grade
control system. Thanks to the efcient engineering that denes the CP-
1650, there is no reason to limit yourself to a system that was designed
only for music – with RTI so much more is possible.
IMPORTANT NOTES
Please read these important notes about the CP-1650:
The CP-1650 should be placed in an area where it is around normal
room temperature (between 60°F to 90°F).
Avoid installing the CP-1650 in a location with little or no air
circulation.
Avoid installing the CP-1650 in a location where it can come in contact
with direct sunlight.
Do not let the CP-1650 system or get wet. It should not be handled
with wet hands or placed in an area where it could get wet.
Do not subject the CP-1650 to smoke, dust, or vibrations.
Only use the power cord that is supplied with the CP-1650. Using the
wrong type of power cord may result in damage.
Do not disassemble the unit. Service of the CP-1650 should be
performed by authorized personnel only.
CHAPTER 1 | WELCOME
Loading...