R-TEC Automation RTMISS Users manual

R-TEC Smart Controls - Interior Sun Sensor

FEATURES

RTMISS

Interior sun sensors automatically manage daylight transitions at each window,

minimizing reliance on and costs of artificial light.

2-Way RF

Communication

3 Modes of

Operation: Close,

Open / Close &

Shade Detect

4 Light

Sensitivity Levels

Low Battery

Warning

© 2021 Rowley® Company. All rights reserved. R-TEC Automation® is a registered trademark of the Rowley® Company, LLC.

1

TABLE OF CONTENTS

Technical Data / Pack Contents 3

Safety 4

Installation 5

Sensor Battery
Replacing Battery
Mounting

Functional Overview 6 - 7

Buttons
Modes
View and Change Sensor Mode
Light Levels Of Light Intensity Values
Light Intensity Detection
Low Battery Notification
Up Button

Programming

Protocol Selection

Adding or Removing Sensor & Creating Group Control

9

Using Motor P1 Button
Using a Pre-Existing Controller

Troubleshooting

8

10

© 2021 Rowley® Company. All rights reserved. R-TEC Automation® is a registered trademark of the Rowley® Company, LLC.

2

COMPLIANCE STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference.

• This device must accept any interference received, including interference that may cause undesired operation.

TECHNICAL DATA / PACK CONTENTS

PRODUCT SPECIFICATIONS

Parameters Value

Voltage 3 V DC

Battery CR2032

Radio Frequency 433.92 MHz

Transmitting Power 10 milliwatt

Transmission Range 65'

Standby Current 5 uA

Light Intensity Level Range 15 - 75 Klux

Temperature Working Range 14º F - 122º F (-10º C - 50º C)

PACK CONTENTS

1. Sun Sensor

2. Instruction Manual

3. 3V - CR2032 Battery

1 3/4"

1 3/4"

© 2021 Rowley® Company. All rights reserved. R-TEC Automation® is a registered trademark of the Rowley® Company, LLC.

5

/8"

3