R-TEC RTMWSR5C Users guide

R-TEC Smart Controls - Surface Mount Wall Switch

RTMWSR5C

Surface Mount Wall Switch in ﬂush mount provides a sensible control option for

individual window treatment, room and home control.

Available in 5 channel model, wall switches are compatible with all ARC motors.

Flush wall switches feature a contemporary design and a wirefree deployment, making them retroﬁt ready for any location. They can be mounted on top of any surface as either a ﬁxed mount or magnetic mount. Its slim proﬁle eliminates the need for any holes to be cut in walls.

FEATURES - 5 CHANNEL

2-Way RF

Communication

Multi Channel

Selectable

Retrofit

Ready

Group

Control

1

2

3

4

5

STOP

Optionally Functions as

a Handheld Remote

1

TABLE OF CONTENTS

Technical Data / Pack Contents 3

Safety 4

Installation 5 - 6

Kit Components Install Switch Batteries Magnetic Wall Clip Fixed Wall Clip

Functional Overview 7

Buttons Selecting a Channel

Programming

8 - 9

Using the P1 Button Using a Pre-Existing Controller

Initial Set Up

10 - 11

Check Motor Direction Set Limits Locking the Limit Setting Function

Adjusting Limits

Adjusting Upper Limit Adjusting Lower Limit

Favorite Positioning

Set a Favorite Position Send Window Treatment to Favorite Position Delete Favorite Position

Troubleshooting

12

13

14

2

COMPLIANCE STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference.

• This device must accept any interference received, including interference that may cause undesired operation.

TECHNICAL DATA / PACK CONTENTS

PRODUCT SPECIFICATIONS

Parameters Value

Voltage 3 V DC

Battery CR2430

Radio Frequency 433.92 MHz

Transmitting Power 10 milliwatt

Transmission Range 65'

Temperature Working Range 14º F - 122º F (-10º C - 50º C)

PACK CONTENTS

1. Surface Mount Wall Switch, 5 Channel

2. Cover

3. Magnetic Wall Clip

4. Fixed Wall Clip

5. Pan Head Screws (2)

6. Phillips Head Screws (2)

7. Anchors (2)

8. 3 V - CR2450 Battery

9. Instruction Manual

5 2 1 47368

3

SAFETY

WARNING

Any changes or modiﬁcations to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Incorrect installation can lead to serious injury and will void manufacturer’s liability and warranty.

CAUTION

• Do not expose to moisture or extreme temperatures.

• Do not allow children to play with this device.

• Use or modiﬁcation outside the scope of this instruction manual will void warranty.

• Installation and programming to be performed by a suitably qualiﬁed installer.

• Use only R-TEC Automation

• Keep clear when in operation.

• Replace battery with correctly speciﬁed type.

®

hardware.

IMPORTANT SAFETY INSTRUCTIONS TO BE READ PRIOR TO OPERATION

• It is important for the safety of persons to follow the enclosed instructions. Save these instructions for future reference.

• Persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge should not be allowed to use this product.

• Frequently inspect for improper operation. Do not use if repair or adjustment is necessary.

• Keep away from children.

Do no dispose of in general waste.

Please recycle batteries and damaged electrical products appropriately.

4

INSTALLATION

INSTALL SWITCH BATTERIES

Open rear battery cover by gently

separating switch covers with screwdriver.

Install CR2430 battery with positive (+) side

facing up. Snap covers back together.

Snap covers back together.

5

R-TEC RTMWSR5C Users guide

Specifications and Main Features

Frequently Asked Questions

User Manual