Rtd LAN24225 User Manual
LAN24225 and LAN34225
PCI Express Dual-Gigabit SFP/Fiber Ethernet
User’s Manual
BDM-610020100 Rev. A
RTD Embedded Technologies, Inc.
AS9100 and ISO 9001 Certified
RTD Embedded Technologies, Inc.
103 Innovation Boulevard
State College, PA 16803 USA
Telephone: 814-234-8087
Fax: 814-234-5218
www.rtd.com
sales@rtd.com
techsupport@rtd.com
Advanced Analog I/O, Advanced Digital I/O, aAIO, aDIO, a2DIO, Autonomous SmartCal, “Catch the Express”, cpuModule, dspFramework, dspModule, expressMate, ExpressPlatform, HiDANplus, “MIL Value for
COTS prices”, multiPort, PlatformBus, and PC/104EZ are trademarks, and “Accessing the Analog World”, dataModule, IDAN, HiDAN, RTD, and the RTD logo are registered trademarks of RTD Embedded
Technologies, Inc (formerly Real Time Devices, Inc.). PS/2 is a trademark of International Business Machines Inc. PCI, PCI Express, and PCIe are trademarks of PCI-SIG. PC/104, PC/104-Plus, PCI-104, PCIe/104,
PCI/104-Express and 104 are trademarks of the PC/104 Embedded Consortium. All other trademarks appearing in this document are the property of their respective owners.
Failure to follow the instructions found in this manual may result in damage to the product described in this manual, or other components of the system. The procedure set forth in this manual shall only be performed
by persons qualified to service electronic equipment. Contents and specifications within this manual are given without warranty, and are subject to change without notice. RTD Embedded Technologies, Inc. shall not
be liable for errors or omissions in this manual, or for any loss, damage, or injury in connection with the use of this manual.
Copyright © 2012 by RTD Embedded Technologies, Inc. All rights reserved.
Revision History
Rev A Initial Release
RTD Embedded Technologies, Inc. | www.rtd.com iii BRG2110 User’s Manual
Table of Contents
1 Introduction 6
Product Overview........................................................................................................................................................................ 6 1.1
Board Features ........................................................................................................................................................................... 6 1.2
Ordering Information ................................................................................................................................................................... 7 1.3
Contact Information .................................................................................................................................................................... 8 1.4
1.4.1 Sales Support 8
1.4.2 Technical Support 8
2 Specifications 9
Operating Conditions .................................................................................................................................................................. 9 2.1
Electrical Characteristics ............................................................................................................................................................ 9 2.2
3 Board Connection 10
Board Handling Precautions ..................................................................................................................................................... 10 3.1
Physical Characteristics ............................................................................................................................................................ 10 3.2
Connectors and Jumpers .......................................................................................................................................................... 11 3.3
3.3.1 External I/O Connectors 11
CN4 and CN5: SFP Connectors 11
D1 and D2: Link/Activity LEDs 11
CN6: External LED Connector 12
3.3.2 Bus Connectors 12
CN1(Top) & CN2(Bottom): PCIe Connector 12
CN16: PCI Connector (LAN24225 only) 12
Steps for Installing .................................................................................................................................................................... 13 3.4
4 IDAN Connections 14
Module Handling Precautions ................................................................................................................................................... 14
4.1
Physical Characteristics ............................................................................................................................................................ 14 4.2
Connectors................................................................................................................................................................................ 15 4.3
4.3.1 External I/O Connectors 15
CN4 and CN5: SFP Connectors 15
D1 and D2: Link/Activity LEDs 15
4.3.2 Bus Connectors 15
CN1(Top) & CN2(Bottom): PCIe Connector 15
CN16: PCI Connector(LAN24225 only) 15
Steps for Installing .................................................................................................................................................................... 16 4.4
5 Functional Description 17
Block Diagram........................................................................................................................................................................... 17 5.1
Ethernet Boot ............................................................................................................................................................................ 17 5.2
Driver Support ........................................................................................................................................................................... 17 5.3
6 Troubleshooting 18
7 Additional Information 19
PC/104 Specifications ............................................................................................................................................................... 19 7.1
PCI Express Specification ........................................................................................................................................................ 19 7.2
Ethernet Controller .................................................................................................................................................................... 19 7.3
8 Limited Warranty 20
RTD Embedded Technologies, Inc. | www.rtd.com iv BRG2110 User’s Manual
Table of Figures
Figure 1: Board Dimensions ................................................................................................................................................................................... 10
Figure 2: Board Connections(LAN24225ER-1 shown) ........................................................................................................................................... 11
Figure 3: Example 104™Stack ............................................................................................................................................................................... 13
Figure 4: IDAN Dimensions .................................................................................................................................................................................... 14
Figure 5: Example IDAN System ............................................................................................................................................................................ 16
Figure 6: LAN24225 Block Diagram ....................................................................................................................................................................... 17
Table of Tables
Table 1: Ordering Options ........................................................................................................................................................................................ 7
Table 2: Operating Conditions .................................................................................................................................................................................. 9
Table 3: Electrical Characteristics ............................................................................................................................................................................ 9
Table 4: CN6 External LED Header........................................................................................................................................................................ 12
RTD Embedded Technologies, Inc. | www.rtd.com v BRG2110 User’s Manual
1 Introduction
Product Overview 1.1
The LAN24225 and LAN34225 are server grade, dual Gigabit Ethernet Modules. They provide two Small Form-factor Pluggable (SFP)
connectors that will accept a pre-installed multi-mode Fiber SFP module, or a customer supplied SFP module. This allows the flexibility to have
any combination of multi-mode fiber, single-mode fiber, or twisted pair interfaces. A PCIe x4 interface ensures excellent bandwidth for
communication with the CPU.
Board Features 1.2
The following sections describe the major features of the LAN24225 FireWire communication module.
General Features
o PCIe x4 Connection
PCIe/104 or PC/104-Express Type 2 connection
o Two Independent Gigabit Ethernet Connections
1000 Mbps SFP on each channel
Does not support 10/100 Mbps
Full Duplex support
o Chipset
Intel 82575EB PCIe Gigabit Ethernet Controller
Pre-boot eXecution Environment (PXE) enables system to boot up via the LAN
o Gigabit MAC/PHY Advanced Features
Intel® I/O Acceleration Technology (Intel® I/OAT) accelerates TCP I/O for improved CPU utilization.
MSI-X support minimizes the overhead of interrupts and allows load balancing of interrupt handling between
cores/CPUs.
Mechanism available for reducing interrupts generated from Tx/Rx operations to maximize system
performance and throughput.
Dual 8 kB configurable Rx and Tx FIFO buffers means no external FIFO memory requirements.
Support for transmission and reception of jumbo frames up to 9.5kBytes enables higher and better throughput
of data.
IEEE 802.3 compliant flow-control support with software-controllable pause times and threshold values to
reduce frame loss from receive overruns.
o Host Offloading Features
Direct Cache Access (DCA) enables the I/O device to activate a pre-fetch engine in the CPU that loads the
data into the CPU cache before use, eliminating cache misses and reducing CPU load.
Checksum offloading, segmentation offloading, and packet filtering capabilities lower processor utilization.
IEEE 802.1q virtual local area network (VLAN) support with VLAN tag insertion, stripping and packet filtering
for up to 4096 VLAN tags allows creation of multiple VLAN segments.
o Multi-Mode SFP (with -1 option)
Avago AFBR-5715APZ or equivalent
850nm
For use with Multi-Mode Fiber Optics
LC Connector
Bail latch
Software
o Supports Windows 7/XP (included on companion CD)
Windows 7 requires Intel driver, not pre-packaged Microsoft driver
o Open source Linux drivers included in the kernel
o Drivers included in most modern operating systems. Check with the OS manufacturer
RTD Embedded Technologies, Inc. | www.rtd.com 6 FW25208 and FW35208 User’s Manual
Table 1: Ordering Options
Part Number
Description
LAN24225ER
PCI/104-Express SFP Ethernet Module (with pass-through PCI)
LAN34225ER
PCIe/104 SFP Ethernet Module (without pass-through PCI)
IDAN-LAN24225ER
PCI/104-Express SFP Ethernet Module in IDAN enclosure
IDAN-LAN34225ER
PCIe/104 SFP Ethernet Module in IDAN enclosure
LAN24225ER-1
PCI/104-Express SFP Ethernet Module (with pass-through PCI) with Multi-Mode SFP installed
LAN34225ER-1
PCIe/104 SFP Ethernet Module (without pass-through PCI) with Multi-Mode SFP installed
IDAN-LAN24225ER-1
PCI/104-Express SFP Ethernet Module in IDAN enclosure with Multi-Mode SFP installed
IDAN-LAN34225ER-1
PCIe/104 SFP Ethernet Module in IDAN enclosure with Multi-Mode SFP installed
Ordering Information 1.3
The LAN24225 is available with the following options:
Throughout this document, LAN24225 refers to both the LAN24225 and LAN34225 unless otherwise noted.
The Intelligent Data Acquisition Node (IDAN™) building block can be used in just about any combination with other IDAN building blocks to
create a simple but rugged 104™ stack. This module can also be incorporated in a custom-built RTD HiDAN™ or HiDANplus High Reliability
Intelligent Data Acquisition Node. Contact RTD sales for more information on our high reliability systems.
RTD Embedded Technologies, Inc. | www.rtd.com 7 FW25208 and FW35208 User’s Manual
Loading...