
English
MODEL RTA - 3784
Thanks for purchasing one of our products.
Please read carefully the assembly instructions before the installation.
Please save this manual for future reference.
MODEL RTA-3784

Spanish
INSTRUCCIONES DE ENSAMBLAJE.
MODELO RTA - 3784
Gracias por comprar uno de nuestros productos.
Por favor lea cuidadosamente las instrucciones de ensamblaje antes de
instalar la unidad.
Por favor guarde este manual para referencias futuras.
12
11
1
15
4
14
10
X3
13
9
2
11
1
4
MODELO RTA-3784

13.5"
RTA-3784
DIMENSIONS
10.5"
CPU holder
Product Size: 47 "W x 23.5"D x 34.5"H
MAXIMUM WEIGHT CAPACITIES
DO NOT ex ceed this limit
Please use care an d good judgement
when placing obj ects on wood surface

RTA-3784
P.5
16
x 3
1110
x 2
13 14 15
12
PART PARTQTY. QTY.ITEM ITEM
A
B
C
D
E
F
G
4
12
4
7
4
3
4
10X65 MM
6X12 MM
4X4 MM
6X30 MM
6X20 MM
6X20 MM
6X50 MM
H
J
K
L
6X35 MM
8
M6
I
4
4
3
3
1
1
4X14 MM
Φ28 MM
Φ16 MM

RTA-3784
P.8
1
2
Assemble the Studs (3) with it’s Support parts (4) and
tight them with the wrench. Insert Screws A to the
Studs’ support parts (4).
Ensamble las patas (3) con sus soportes (4) y
4
3
ajustelos con la llave. Luego inserte los tornillos A en
X4
la los soportes.
X4
1 1
SCR E WS
10X65 MM
A
TOR N ILLOS
4PCS
Fix the Studs to the Main Structures (1)
inserting the Screws of the step 1 and
tight them
Fije las patas a las extructuras, a traves
de los Tornillos del paso 1 y ajustelas.
4
X4
"
3
3-3/ 8
5
"
5-5/ 8"
3-3/ 8
5-5/ 8
"
1
1
Use Screws G to fix the Horizontal Tubes (5) to between the Main Structures (1).
Pay attention to the orientation of the holes on the structures: The holes
at 3-3/8" from each end Must face UP.
Use Tornillos G para fijar los Tubos Horizontales (5) entre Las estructuras
Principales (1). Preste atención a la orientación de los hoyos en las
estructuras: Los hoyos a 3-3/8" al final de los tubos DEBEN orientarse hacia
ARRIBA.
SCR E WS
G
TOR N ILLOS
6X50 MM
4PCS

RTA-3784
P.9
4
5
Use Screws B to fix the Support
Brackets (11) at the back of the
Main Structures (1).
Use Tornillos B para fijar los Soportes
1
Verticales (11) en la parte posterior de
las Estructuras Principales (1).
11
11
1
11
1
SCR E WS
6X12 MM
B
TOR N ILLOS
4PCS
11
11
2
6
6
X4
7
Left
Use Screws C to fix the Slider’s Bases (6) to the Sliders (7).
Pay attention to the orientation of the parts.
Use Tornillos C para fijar las Bases de Deslizadores (6) a los Deslizadores (7).
Preste atención a la orientación de las partes.
7
Right
SCR E WS
6X20 MM
E
M6
I
SCR E WS
4X4 MM
C
TOR N ILLOS
4PCS
4PCS
TOR N ILLOS
4PCS

RTA-3784
P.10
7
8
8
7
Left
Use Screws B to fix the Slider’s bases (6) to
the Divider Rods (8).
Pay attention to the orientation of the parts.
Use Tornillos B para fijar las Bases de
Deslizadores (6) a los Tubos Divisores (8).
Preste atención a la orientación de las partes.
X2
8
5
Right
Use Screws H to assemble the Divider
Rods (8) between the Horizontal Tubes (5).
Make sure the sliders are located on the
Rods (8) facing towards the inside of the unit.
Use Tornillos H para ensamblar los Tubos
Divisores (8) entre los Tubos Horizontales (5).
Aseg rese que los deslizadores queden sobre
los tubos (8) viendo hacia el interior de la unidad.
7
7
Left
7
Right
ú
2-1/2"
8
8
SCR E WS
6X12 MM
B
8PCS
1"
TOR N ILLOS
9
9
7
Right
7
Left
Use Screws J to assemble the Keyboard Panel (9) to the Slider (7) from
underneath.
Use Tornillos J para fijar el Panel de Teclado (9) a los Deslizadores (7) por
debajo.
SCR E WS
6X35 MM
H
SCR E WS
4X14 MM
J
TOR N ILLOS
4PCS
TOR N ILLOS
4PCS

10
RTA-3784
P.11
Use Screws D to fix the Main Panel (13) to the
13
5
Horizontal Tubes (5). Screw loose and do not
tighten them until all are in place!
Use Tornillos D para fijar el Panel Principal (13) a
los Tubos Horizontales (5). Medio atornille y no
apriete hasta que todos estén colocados!
11
12
K
L
10
10
12
X3
X3
13
SCR E WS
6X30 MM
D
Insert Screws F in the Short Tubes (10) and assemble them
with the Printer Panel (12).
Inserte los Tornillos Fen los Tubos cortos (10) y ensamblelos
con el Panel de Impresora (12).
SCR E WS
F
SCR E WS
6X30 MM
D
TOR N ILLOS
4PCS
TOR N ILLOS
6X20 MM
3PCS
TOR N ILLOS
D
K
Φ28 MM
L
Φ16 MM
3PCS
3PCS
3PCS

13
14
RTA-3784
15
15
15
14
15
16
P.12
X4
15
SCR E WS
6X35 MM
H
TOR N ILLOS
4PCS
Tight all screws well and enjoy your new product!
Apriete todos los Tornillos y disfrute su nuevo producto!

CARE AND MAINTENANCE
English
- DO NOT EXPOSE THE SURFACES TO DIRECT SUNLIGHT, OR
EXTREME ENVIRONMENTAL CONDITIONS. EXPOSURE WILL
DAMAGE THE PRODUCT, WHICH IS NOT COVERED BY THE
WARRANTY.
- DO NOT USE SOLVENTS OVER SURFACES OR STRUCTURAL
TUBES. SURFACES MUST BE CLEANED WITH A SOLUTION OF
A SMOOTH SOAP AND WATER, THEN CLEARED WITH A DRY
TOWEL.
- PRODUCTS THAT ARE HEAVY SHOULD BE LIFTED OR MOVED
BY AT LEAST 2 PERSONS, AND ALL OBJECTS SHOULD BE
REMOVED FROM THE PRODUCT.
Spanish
- NO EXPONGA LAS SUPERFICIES A LA LUZ SOLAR DIRECTA,
O A CONDICIONES AMBIENTALES EXTREMAS. ESTE TIPO DE
DAÑOS NO SON CUBIERTOS POR LA GARANTÍA DEL PRODUCTO.
- NO USE SOLVENTES SOBRE LAS SUPERFICIES O TUBOS
ESTRUCTURALES. LAS SUPERFICIES DEBEN SER LIMPIADOS
CON UN JABÓN SUAVE Y AGUA, Y SECADOS IMMEDIATAMENTE
CON UNA TOALLA LIMPIA Y SECA.
- PRODUCTOS QUE SON PESADOS DEBEN LEVANTARSE O
MOVERSE POR AL MENOS 2 PERSONAS, Y TODOS LOS
OBJETOS DEBEN SER REMOVIDOS DEL PRODUCTO.

PRODUCT WARRANTY
TECHNI MOBILI DESK WARRANTY
LIMITED 5-YEAR WARRANTY
RTA Products, LLC warrants to the Original Purchaser who acquired a new product from RTA Products or its
authorized resellers that this product will be free from defects in its workmanship and materials, under normal
use and service conditions, as described herein. "Defects" as used in this warranty, is dened as any
imperfections that impair the use of the furniture or product. RTA products will repair or replace, at is option,
without charge to the original purchaser ‘other than freight from purchaser to RTA Products, only the defective
products or parts for a period of FIVE (5) Years.
Replacement parts can only be supplied if parts are available. Items out of production may be unavailable.
This warranty will be effective for the applicable time period beginning the date of purchase on your original
sales receipt. RTA product’s obligation under this warranty is limited to repairing or replacing products or parts
as provided herein. This product has been designed for and is intended for ofce and home-ofce use only.
This warranty is Original Purchaser’s sole remedy for product defects, and this warranty does not extend to
any product, or damage to any product, caused by or attributed to abuse or misuse, products used for
commercial or rental purposes, use modications of, or attachments to the product, and products or parts not
used, maintained, or extended hereunder is in lieu of any and all other warranties, express or implied, including
without limitations any implied warranty or merchantability or of tness for a particular purpose. Please note, all
desks made with PVC Laminate surface should not be exposed to direct sunlight, as it may damage the
material. Damage of this nature is not covered under this warranty.
RTA Products will not be responsible for indirect, special, incidental or consequential damages. This warranty
is limited to merchandise purchased in the Continental United States. Some States do not allow the exclusion
or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to
you. This warranty gives you specic legal rights. You may also have other rights that may vary from state to
state.
RTA Products will advise you of the procedure to follow in making warranty claims. The following are the
procedures for warranty claims:
a. Call us Monday – Friday, from 9am-5pm (Eastern Time) at (866) 782-8262 to explain the defect and give
your name, address and phone number. Please have ready the model number of our product, date and place
of purchase. You can also write to us by e-mail to warranty@rtaproducts.com and include the same
information.
b. If we determine that replacement will remedy the situation, and in order to determine the extent or the cause
of the defect, purchaser will need to send the part in question at purchaser’s expense. Once we receive the
part, we will examine it and determine whether the claim is valid (or not), and then proceed to send the
replacement. We will ship the replacement at our expense.