AUX
Socket
HDMI ARC
Socket
SERVICE ONLY
Socket
AC~
Socket
SUBWOOFER OUT
Socket
OPTICAL
Socket
4. Product Description
Front View
Rear View
LED Indicator
red/Green：Standby/AUX mode
Orange：Optical mode
Blue：Bluetooth mode
Orange：HDMI ARC mode
2. Standard Accessories
Wall bracket screws
3. Preparations
Wall Brackets
Wall mount guide
User Manual & QSG
3.5mm-3.5mm
audio Cable
Sound Bar
TV
Orange
Quick Start Guide
TB232SW
2.1 Channel Soundbar with Subwoofer
1. Specifications
Sound Bar
Power Requirements: AC 120V~ 60Hz
Power Consumption: 30 W
Output Power: 15W x 2
Audio Input Sensitivity: 500mV
Frequency Response: 200Hz - 20kHz
Speaker Impedance: 4Ω x 2
Unit Dimension (W x H x D):
31.5 x 2.4 x 2.4 inch
Wire Subwoofer
Output power: 30 W
Frequency response: 40Hz - 200Hz
Impedance: 6Ω
Dimensions (W x H x D):
5.9 x 8.7 x 12.6 inch
Remote Control
Distance/Angle: 19.7 feet (6m) / 30°
Battery Type: CR2025
Optical
Cable
HDMI
Cable
Wire
Subwoofer
Remote Control Sensor
Remote
Control
Replace the Remote Control Battery:First-time use：
The battery (batteries or battery pack)
shall not be exposed to excessive heat
such as sunshine, fire or the like.
Remove the protective
tab to activate the
remote control battery.
The actual supply voltage is
120V~ 60Hz。
Standby/ON
• When you first connect the unit to the main socket,
the unit will be in STANDBY mode.
• Press the button on the remote control to switch
the main unit ON or OFF.
• Disconnect the main plug from the main socket if you
want to switch the unit off completely.
- If a TV or an external device is connected, the unit will
switch on automatically when the TV or the external
device is switched on.
- When the unit no input signal for over 15 minutes, the
unit will automatically switch to Standby mode.
Adjust the Volume
- Press the VOL+ / VOL- buttons to adjust the volume.
- If you wish to turn the sound off, press the MUTE button
on the remote control. Press the MUTE button again or
press the VOL+ / VOL- buttons on the unit or on the
remote control to resume normal listening.
- While adjusting the volume, the status indicator flashes
quickly.
- While the volume level reaches its maximum level, if you
press the VOL+ button again, the status indicator flashes
once. While the volume level reaches its minimum level,
if you press the VOL- button again, the status indicator
flashes once.
7. HDMI Operation6. OPTICAL Operation 5. General Operation
Select the play function
Mute or resume the sound
Increase the volume.
Decrease the volume.
Turn on / turn off
OPTICAL
AUX / BT
HDMI ARC
Previous track
Next track
Start/pause play
Activate Bluetooth pairing
Select a preset sound effect
Remote Control
NEWS
MOVIE
MUSIC
VOL+
VOL -
MUTE
BF
/
PAIR
OPTICAL
OPTICAL
TV
Orange
HDMI ARC
HDMI
ARC
Connect to an external audio device.
Power
Cable
10. Wall Mounting
wall mount guide
2.5 feet
(760 mm)
1 Year free guarantee !
Thank you for buying the products of RSR !
We are offering our products with 1 year guarantee from the
date of your purchase.
You can enjoy the after-sales service in case of the product is
faulty or you are simply
struggling to set it up by email to our and our customer
service center will revert to you.
support@richsound.com
Troubleshooting
To keep the warranty valid, never try to repair the system yourself. If you
encounter problems when using this unit, check the following points before
requesting service.
No power
- Ensure that the AC cord of the apparatus is properly connected .
- Ensure that there is power at the AC outlet.
- Press standby button to turn the unit on.
Remote control does not work
- Before you press any playback control button, first select the correct source.
- Reduce the distance between the remote control and the unit.
- Insert the battery with its polarities (+/-) aligned as indicated.
- Replace the battery.
- Aim the remote control directly at the sensor on the front of the unit.
I can’t find the Bluetooth name of this unit on my
Bluetooth device for Bluetooth pairing
- Ensure the Bluetooth function is activated on your Bluetooth device.
- Ensure you have paired the unit with your Bluetooth device.
* Design and specifications are subject to change without notice.
6. AUX操作 9. Bluetooth Operation
8. AUX Operation
TV
AUX
RSR TB232SW
Blue
0000
PIN
flash slowly: not connected
flash fast: pairing mode
solidly: successfully connected
BT
Bluetooth Max. distance
26 feet (8m).
Headphone
Green
> 25mm
3-3.5
mm
5mm
Loading...