Page 1
Africa
RS Components SA
P.O. Box 12182,
Vorna Valley, 1686
20 Indianapolis Street,
Kyalami Business Park,
Kyalami, Midrand
South Africa
www.rs-components.com
Asia
RS Components Ltd.
Suite 1601, Level 16, Tower 1,
Kowloon Commerce Centre,
51 Kwai Cheong Road,
Kwai Chung, Hong Kong
www.rs-components.com
China
RS Components Ltd.
Suite 23 A-C
East Sea Business Centre
Phase 2
No. 618 Yan'an Eastern Road
Shanghai, 200001
China
www.rs-components.com
Europe
RS Components Ltd.
PO Box 99, Corby,
Northants.
NN17 9RS
United Kingdom
www.rs-components.com
Japan
RS Components Ltd.
West Tower (12th Floor),
Yokohama Business Park,
134 Godocho, Hodogaya,
Yokohama, Kanagawa 240-0005
Japan
www.rs-components.com
U.S.A
Allied Electronics
7151 Jack Newell Blvd. S.
Fort Worth,
Texas 76118
U.S.A.
www.alliedelec.com
South America
RS Componentes Limitada
Av. Pdte. Eduardo Frei M. 6001-71
Centro Empresas El Cortijo
Conchali, Santiago, Chile
www.rs-components.com
104mm
148mm
Cable Locator
Instruction Manual
1.材质：封面封底105g铜版纸（内页
70g书写纸）
2.结合方式：骑马钉
3.尺寸：104*148mm
4.印刷：封面印彩色（内页单黑）
RS LOGO 色号是PANTONE 485C
RS-1012
Stock No: 136-7891
Page 2
1
13/05/2017 Version No. 001
Cable Locator/English
service
connected to the transmitters, there is already a fault
current
Page 3
2 3
13/05/2017 Version No. 001 13/05/2017 Version No. 001
Cable Locator/English
Cable Locator/English
D
H
H
this
Backlight
that may have been
The
The
Page 4
4 5
13/05/2017 Version No. 001 13/05/2017 Version No. 001
Cable Locator/English
Cable Locator/English
Press the mode button to alternate between
Automatic and manual mode.
Press NCV button to activate the flashlight.
Page 5
6 7
13/05/2017 Version No. 001 13/05/2017 Version No. 001
Cable Locator/English
Cable Locator/English
( )
cables
cables
cable
on the material
Page 6
8 9
13/05/2017 Version No. 001 13/05/2017 Version No. 001
Cable Locator/English
Cable Locator/English
domestic
material
domestic
the test as shown in figure 4.
the the
wires
wires
the
on the material
Switching button 4 from LEVEL 1 to LEVEL lll will
increase sensitvity of Distance up to a factor
of 5.
Switching button 4 from LEVEL 1 to LEVEL lll will increase sensitvity of
Distance up to a factor of 5.
When the supply cable which is fed with the signal via the transmitter is located,
and it is directly in parallel to other conductors (e.g. cable duct), or if these
conductors are crossed, the signal will also transmit into the other conductors.
The fuse must be removed during this example.
For use
.
C
Page 7
10 11
13/05/2017 Version No. 001 13/05/2017 Version No. 001
Cable Locator/English
Cable Locator/English
Switching button 4 from LEVEL 1 to LEVEL lll will increase sensitvity of
Distance up to a factor of 5.
Switching button 4 from LEVEL 1 to LEVEL lll will increase sensitvity of
Distance up to a factor of 5.
correctly
K-ohm
K-ohm
8
6
the connected
working
Page 8
12 13
13/05/2017 Version No. 001 13/05/2017 Version No. 001
Cable Locator/English
Cable Locator/English
Switching button 4 from LEVEL 1 to LEVEL lll will increase sensitvity of
Distance up to a factor of 5.
Switching button 4 from LEVEL 1 to LEVEL lll will increase sensitvity of
Distance up to a factor of 5.
will
By
out
a cable
connect tovia
current
Page 9
14 15
13/05/2017 Version No. 001 13/05/2017 Version No. 001
Cable Locator/English
Cable Locator/English
Switching button 4 from LEVEL 1 to LEVEL lll will increase sensitvity of
Distance up to a factor of 5.
Switching button 4 from LEVEL 1 to LEVEL
lll will increase sensitvity of Distance up
to a factor of 5.
Switching button 4
from LEVEL 1 to LEVEL lll will increase sensitvity of Distance up to a factor
of 5.
method
the
C
Page 10
allows
16 17
13/05/2017 Version No. 001 13/05/2017 Version No. 001
Cable Locator/English
Cable Locator/English
Switching button 4 from LEVEL 1 to LEVEL lll will increase sensitvity of
Distance up to a factor of 5.
Switching button 4 from LEVEL 1 to LEVEL lll will increase sensitvity of
Distance up to a factor of 5.
follows:
as shown in
to ensure
Page 11
18 19
13/05/2017 Version No. 001 13/05/2017 Version No. 001
Cable Locator/English
Cable Locator/English
ground
shown in
Ensure there is sufficiant
ground
short there will be no distinction between
the conductors.
is a of
moving
traced
will be
when
will decrease as distance from the transmitter signal increases.
Detection range will be improved using a single line.
Maintain
agreements
relevant
will increase sensitvity
between
of distance up to a factor of 5.
The range will be reduced when the conductors
are twisted around each other.
To reduce this effect, the circuit should be
connected as in figure 17. This circuit tests
only a single conductor at a time.
The potential distance in this circuit will be
up to 2.5 metres.
If the transmitter is connected across the phase and neutral the signal will be
attenuated reducing sensitivity (see figure 16)
Page 12
20 21
13/05/2017 Version No. 001 13/05/2017 Version No. 001
Cable Locator/English
Cable Locator/English
Switching button 4 from LEVEL 1 to LEVEL lll will increase sensitvity of
Distance up to a factor of 5.
Example
together. You will need
the test as shown
make sure
together.
C
ln the case where
end or the cable
cable ends
number
Page 13
22 23
13/05/2017 Version No. 001 13/05/2017 Version No. 001
Cable Locator/English
Cable Locator/English
Switching button 4 from LEVEL 1 to LEVEL lll will increase sensitvity of
Distance up to a factor of 5.
to illuminate the measurement point.
will need to be cleaned proffessionally.
be
B
Loading...