RSA Lighting TX97-X User Manual

DESCRIPTION
7.45”
4.65”
23.23”
34.77”
24.73”
38.90”
15.01”
6.14”
4.64”
Integral Electronic
Metal Halide Ballasts
45º x 45º
Adjust
Double Gimbal
An adjustable Multi-lamp Recessed fixture with a 0.75” trim flange suitable for downlighting and accent applications. Utilizes FIVE (5) PAR20 Metal Halide lamps.
For new construction applications. Insulation must be kept 3” from all sides and at least 1” above the housing.
SPECIFICATION FEATURES
A ... Housing
Housing, junction box & trim assembly are all steel construction. Fixture utilizes a removable trim sleeve to provide a
0.75” flange around the ceiling opening and to help conceal the inner hardware of the fixture from sight below the ceiling. Can accommodate 0.50” to 1.25” ceiling thickness. Optional Chicago Plenum configuration available.
B ... System Protection:
Thermal protection provided to guard against overheating and misuse of insulation over and around fixture. Vent holes in housing provide cooler operation.
C ... Junction Box
Junction Box is UL listed for through branch wiring, 6 #12 90º C supply con­ductors or 60º C for end of run. The fixture
is also UL listed as ‘access above ceiling not required’.
D ... Electrical
Electrical accessible through ceiling opening. J-Box located on the side wall of the housing behind removable access doors. Integral electronic metal halide ballasts on individually removable “trays” for easy maintenance. May also be con­figured for remote power.
E ... Lamps
Five (5) PAR20 Metal Halide lamps mount­ed in adjustable double gimbals. Lamp holders are individually removable and may be regressed 1” for additional cut-off. Lamp can accept up to three optical accessories (i.e. lens + hex louver + snoot). 45º x 45º locking lamp adjustment. Beveled-edge
Catalog # Type
Project
Comments Date
Prepared by
lamp ring is secured with threadless, bayonet action. Optional retractable arm is available for lamp pulldown and extreme aiming. Includes Med. base sockets.
F ... Mounting
Butterfly Brackets accept 1/2” EMT, C Channel, Tbar fasteners, and bar hangers. Four tabs on housing for securing to structure.
G ... Labels
cULus listed for non-type IC applications, suitable for use in damp locations.
Ceiling Cut-Out: 5.44” x 24.02”
COMBOLIGHT®
Multi-Lamp Fixture
PAR20 Metal Halide
w/ 0.75” Trim Flange
Next Generation
Recessed
Five (5) Light
New Construction
Housing
For use with 20W or 39W PAR20MH lamps.
ORDERING INFORMATION
C5 E T
Configuration C5
Recessed Five (5) Light
www.cooperlighting.com
=
COMBOLIGHT
Lamp Type / Wattage Label 020M20 = 20 Watt PAR20 Metal Halide 039M20 = 39 Watt PAR20 Metal Halide
Housing N = New Construction C = Chicago Plenum
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
Power Supply Voltage 1 = 120V 2 = 277V
Power Supply E = Electronic Metal Halide
Ballast
Lamp Mechanism G = Double Gimbal R = Retractable Double Gimbal
Trim Flange T = 0.75” Trim Flange
Trim Finish W = White B = Black S = Industrial Silver
Housing Interior/Electrical Door/Sleeve Finish W = White B = Black S = Industrial Silver
rev 022408
Loading...