RSA Lighting PLT42, PLT32, BX50, T5HO39, T5HO54 User Manual

...
Catalog #
Type
Project
COMBOLIGHT® COMBO CLASSIC RECESSED
LAMP GROUP 2 - CONFIGURATION “E” TWO (2) T4 G8.5 Metal Halide lamp cells - TWO (2) Fluorescent lamp cells New Construction Recessed Housing - Trim or Trimless
ORDERING EXAMPLE:
Fluorescent >> BX40 BX50 PLL80 PLT26 PLT32
PLT42 T528 T535 T5HO39
T5HO54
Lamp Group 2
Metal Halide
A
65.18” 65.18” 65.18” 30.18” 31.18” 33.18” 112.18” 136.18” 88.18” 112.18”
B
81.98” 81.98” 81.98” 46.98” 47.98” 49.98” 128.98” 152.98” 104.48” 128.98
C
25.50” 25.50” 25.50” 8.00” 8.50” 9.50” 49.00” 61.00” 37.00” 49.00”
RSA LIGHTING®
RSA LIGHTING LLC 9660 - 9700 TOPANGA CANYON BLVD. CHATSWORTH CA. 91311
TOLL FREE: 800-356-3030 • 818-349-3030 • FAX: 818-349-3031 • www.rsalighting.com
©2003 RSA Lighting LLC All Rights Reserved • Specifications subject to change without notice.
Optional Accessories - See RSA Combo Classic accessory page for details.
Baffle Snoots Louvers Lenses
Fluorescent Diffusers and Louvers - Please specify
TWD - Textured White Diffuser CB1 - 2” Parabolic LouverMPD - Conical Prism Diffuser CB2 - 1” Parabolic Louver
DESCRIPTION:
An adjustable recessed fixture suitable for multiple downlighting applications with one point of elec­trical entry. Mixes the use of metal halide lamps with fluorescent lamps. Powder coat finish on hous­ing & lamp assembly.
CONSTRUCTION:
Housing, Plaster Frame & Trim Assembly: 18 gauge CRS. J-Box Assembly: 16 gauge CRS (galva­nized). Fixture is offered with a .75” ceiling trim or as a trimless fixture. Can accommodate 0.50” to 1.00” ceiling thickness.
LAMP ASSEMBLY:
Two T4 G8.5 Metal Halide lamp cells with two fluorescent lamp cells . Can accept up to two optical accessories. 380º x 45º locking lamp adjustment. Provides 45º visual cut-off. Utilizes a sophisti­cated all aluminum reflector with distributions of 15º, 27º and 55º spreads.
SYSTEM PROTECTION:
Thermal protection provided to guard against overheating, and misuse of insulation over and around fixture. Vent holes in hous­ing provide cooler operation
ELECTRICAL:
Fixture is two circuit. Circuit 1: Integral Aromat® elec­tronic metal halide ballasts for T4 G8.5 metal halide lamps.
Circuit 2: Integral electronic bal­lasts for fluorescent lamps.
Lutron® dimming ballasts avail­able upon request.
Junction box is UL listed for through branch wiring, for 8 #12, 90°C supply conductors or 60°C for end of run (access above ceiling not required).
SPECIFY -
E
Item # / Lamp Type Configuration Fluorescent Lamp Interior Finish Trim Finish Distribution Vol tage
Lamp Group 2 Metal Halide
CR2TC35 - T4 G8.5 MH 35W
E - Two T4 G8.5
Metal Halide lamp cells with Two Fluorescent lamp cells
BX40 - 40W BIAX® BK - Black BK - Black 15 - 15º Narrow Reflector 120 - 120 Volts
CR2TC70 - T4 G8.5 MH 70W
BX50 - 50W BIAX® WH - White WH - White 27 - 27º Medium Reflector 277 - 277 Volts PLL80 - 80W PL-L S - Silver S - Silver 55 - 55º Wide Reflector PLT26 - 26W PL-T PT - Custom PT - Custom PLT32 - 32W PL-T TR - Trimless PLT42 - 42W PL-T T528 - 28W T5 T535 - 35W T5 T5HO39 - 39W T5HO T5HO54 - 54W T5HO
T8 lamps also available
CR2TC35 E BX40 BK WH 27 120
Custom configurations are available with Combo Classic fixtures. Also available with T8 fluorescent lamps. Consult RSA for details
Luminance / Performance Comparison to Regular H.I.D. Lamps
Regular MH Lamp T4 G8.5 MH Lamp Initial Lumens 35W = 2000 70W = 4850 35W = 3300 70W = 6600 Rated Lamp Life 35W = 9000 hrs 70W = 9000 hrs 35W = 9000 hrs 70W = 9000 hrs
___
___
___
___
___
___
9.50"
8.75"
Dual Fluorescent lamp cells w/ integral ballast accessible from below
Ballast Ballast
Integral reflector Integral reflector
6.90"
A
T
I
E
L
D
M
I
R
T
0.75" Trim
7.00"
L
M
E
I
S
R
S
T
D
E
T
A
I
L
Ceiling compund is applied right to the edge of the fixture opening
C
B
A
C
6.90"
Must specify a diffuser or louver
for fluorescent cell. See below.
Aromat® Electronic Metal Halide Ballasts
Thermal Protector
380º x 45º locking angular adjustment 45º visual cut-off
Butterfly Brackets for Black Iron Mounting
Loading...