RSA Lighting RNC20, RNC10, RNC95 User Manual
DESCRIPTION
18” flexible conduit
13.38”
14.20”
19.70”
9.48”
9.95”
11.31”
13.01”
1.70”
9.45”
Required
above
ceiling
45º x 45º
Adjust
Double
Gimbal
6.69”
Thermal
Protector
Perforated
Meshplate
Separate Wiring
Compartment
9.25”
4.10”
Integral Electronic
Metal Halide Ballasts
An adjustable Single-lamp Recessed fixture for trimless installation suitable for
downlighting and accent applications. Utilizes ONE (1) T4 G8.5 Metal Halide
lamp.
For remodel applications. Insulation must be kept 3” from all sides and at least
1” above the housing.
SPECIFICATION FEATURES
A ... Housing
Housing and junction box are aluminum,
trimless meshplate is steel with powder
coated finish. Perforated meshplate
allows for trimless installation in drywall/
plaster ceilings by allowing the ceiling’s
mudding compound to be applied right
up to the edge of the fixture opening.
Includes a beveled “knife-edge” lips to
ensure a clean edge. Can accommodate
various ceiling thickness.
B ... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
C ... Junction Box
Junction Box is UL listed for through branch
wiring, 6 #12 90º C supply conductors or
60º C for end of run. The fixture is also UL
listed as ‘access above ceiling not required’.
D ... Electrical
Integral electronic metal halide ballasts are
mounted in a separate metal enclosure
box attached to the junction box with
18” of flexible conduit. Ballast enclosure
includes a separated wiring compartment
and two knockouts for conduit entry and
features a perforated metal door for easy
maintenance access and cooler operation.
Entire electrical assembly (jbox and ballast
enclosure) is removable from the housing
for easy maintenance.
E ... Lamps
One (1) T4 G8.5 Metal Halide lamp with
reflector mounted in adjustable double
gimbal. Lamp holder is removable and
may be regressed 1” for additional cutoff. Lamp can accept up to three optical
accessories (i.e. lens + hex louver +
snoot). 45º x 45º locking lamp adjustment. Beveled-edge lamp ring is secured
with threadless, bayonet action. Optional
Catalog # Type
Project
Comments Date
Prepared by
retractable arm is available for lamp
pulldown and extreme aiming. Includes
G8.5 socket.
F ... Mounting
Mounting clips are provided which
mount the housing edge flush with the
finished ceiling line. Mounting clips are
secured to the housing through the
meshplate with screws.
G ... Labels
cULus listed for non-type IC
applications, suitable for use in damp
locations.
Ceiling Cut-Out: 7.80” x 7.80”
COMBOLIGHT®
Single-Lamp Fixture
T4 G8.5 Metal Halide
Next Generation
Recessed
One (1) Light
Remodel Housing
Trimless
T4 G8.5 Lamp with Reflectors
This fixture utilizes T4 Metal Halide lamp and includes highperformance clear aluminum reflectors in narrow, medium,
or wide distributions. Non-standard color reflectors are
available upon request.
ORDERING INFORMATION
C1 R E N N
Configuration
=
C1
COMBOLIGHT
Recessed One (1) Light
Square
Housing
R = Remodel
www.cooperlighting.com
Lamp Type / Wattage Label / Reflector Type
039T4N = 39 Watt T4 G8.5 Metal Halide / Narrow
039T4M = 39 Watt T4 G8.5 Metal Halide / Medium
039T4W = 39 Watt T4 G8.5 Metal Halide / Wide
070T4N = 70 Watt T4 G8.5 Metal Halide / Narrow
070T4M = 70 Watt T4 G8.5 Metal Halide / Medium
070T4W = 70 Watt T4 G8.5 Metal Halide / Wide
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
Power Supply
Voltage
1 = 120V
2 = 277V
Power Supply
E = Electronic Metal Halide
Ballast
Lamp Mechanism
G = Double Gimbal
R = Retractable Double Gimbal
Trim Insert
N = Trimless
Housing Interior/Electrical Door
/Sleeve Finish
W = White
B = Black
S = Industrial Silver
Trim Finish
N = Trimless
rev 050108
Loading...