RSA Lighting Indoor Furnishings User Manual

DESCRIPTION

Thermal
Protector

Separate Wiring

Compartment

18” flexible conduit 24” flexible conduit

3.88”

7.75”

9.25”9.25”

8.58”

7.75”

6.25”

12.54”

3.88”

1.60”

6.50”

6.88”

6.50”

6.88”

5.75”

Required

above

ceiling

Integral Electronic Metal

Halide Ballasts

45º x 45º

Adjust

Double
Gimbal

An adjustable Multi-lamp Recessed fixture with a 0.75” trim flange suitable for
downlighting and accent applications. Utilizes FOUR (4) MR16 Metal Halide
lamps in a 2x2 square configuration.

For remodel applications. Insulation must be kept 3” from all sides and at least
1” above the housing.

SPECIFICATION FEATURES

A ... Housing

Housing and junction box are aluminum,
trim assembly is steel with powder coated
finish. Fixture utilizes a removable trim
sleeve to provide a 0.75” flange around
the ceiling opening and to help conceal
the inner hardware of the fixture from sight
below the ceiling. Can accommodate
various ceiling thickness.

B ... System Protection:

Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.

C ... Junction Box

Junction Box is UL listed for through branch
wiring, 6 #12 90º C supply conductors or
60º C for end of run. The fixture is also UL
listed as ‘access above ceiling not required’.

D ... Electrical

Integral electronic metal halide ballasts are
mounted in a separate metal enclosure
box attached to the junction box with
18” of flexible conduit. Ballast enclosure
includes a separated wiring compartment
and two knockouts for conduit entry and
features a perforated metal door for easy
maintenance access and cooler operation.
Entire electrical assembly (jbox and ballast
enclosure) is removable from the housing
for easy maintenance.

E ... Lamps

Four (4) MR16 Metal Halide lamps
mounted in adjustable double gimbal.
Lamp holders are removable and may be
regressed 1” for additional cut-off. Lamps
can accept up to three optical acces­sories (i.e. lens + hex louver + snoot).
45º x 45º locking lamp adjustment.

Catalog # Type

Project

Comments Date

Prepared by

Beveled-edge lamp ring is secured with
threadless, bayonet action. Optional
retractable arm is available for lamp
pulldown and extreme aiming. Includes
GX10 TAL sockets.

F ... Mounting

Mounting clips are provided which
mount the housing edge flush with the
finished ceiling line. Mounting clips are
secured to the housing with screws.

G ... Labels

cULus listed for non-type IC
applications, suitable for use in damp
locations.

Ceiling Cut-Out: 8.84” x 8.84”

COMBOLIGHT®

Multi-Lamp Fixture

Four (4) Light Square

MR16 Metal Halide

w/ 0.75” Trim Flange

Next Generation

Recessed

Remodel Housing

For use with GE 20W or 39W CMH MR16
or ES16MH lamps.

ORDERING INFORMATION

CX R E T

Configuration

=

CX

COMBOLIGHT

Recessed Four (4) Light
Square

www.cooperlighting.com

Housing
R = Remodel

Lamp Type / Wattage Label
020C16 = 20 Watt MR16 Metal Halide
039C16 = 39 Watt MR16 Metal Halide

Specifications and Dimensions subject to change without notice.

RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX [phone]

Power Supply
E = Electronic Metal Halide

Power Supply
Voltage
1 = 120V
2 = 277V

Ballast

Trim Flange
T = 0.75” Trim Flange

Lamp Mechanism
G = Double Gimbal
R = Retractable Double Gimbal

Trim Finish
W = White
B = Black

Housing Interior/Electrical Door/Sleeve
Finish
W = White
B = Black
S = Industrial Silver

S = Industrial Silver

rev 121107