RSA Lighting COMBOLIGHT User Manual
DESCRIPTION
Thermal
Protector
Wiring
Compartment
4.65”
27.87”
28.70”
40.46”
30.67”
7.95”
9.27”
10.96”
4.65”
7.45”
Required
above
ceiling
45º x 45º
Adjust
Double
Gimbal
An adjustable Multi-lamp Recessed fixture for trimless installation suitable for
downlighting and accent applications. Utilizes SIX (6) PAR20 120V lamps.
For remodel applications. Insulation must be kept 3” from all sides and at least
1” above the housing.
SPECIFICATION FEATURES
A ... Housing
Housing and junction box are aluminum,
trimless meshplate is steel with powder
coated finish. Perforated meshplate
allows for trimless installation in drywall/
plaster ceilings by allowing the ceiling’s
mudding compound to be applied right
up to the edge of the fixture opening.
Includes a beveled “knife-edge” lips to
ensure a clean edge. Can accommodate
various ceiling thickness.
B ... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
C ... Junction Box
Junction Box is UL listed for through
branch wiring, 6 #12 90º C supply conductors or 60º C for end of run. The fixture
is also UL listed as ‘access above ceiling
not required’.
D ... Electrical
Electrical accessible through ceiling
opening. J-Box located on the side
wall of the housing behind removable
access doors. Electrical components on
individually removable “trays” for easy
maintenance.
E ... Lamps
Six (6) PAR20 120V lamps mounted in
adjustable double gimbal. Lamp holders
are removable and may be regressed 1”
for additional cut-off. Lamps can accept
up to three optical accessories (i.e. lens
+ hex louver + snoot). 45º x 45º locking
lamp adjustment. Beveled-edge lamp
ring is secured with threadless, bayonet
action. Optional retractable arm is available for lamp pulldown and extreme aiming. Includes Med. Base sockets.
Catalog # Type
Project
Comments Date
Prepared by
F ... Mounting
A mounting frame is provided which
inserts into the ceiling opening. The
housing is then pushed through the
mounting frame and secured with
screws through the meshplate.
G ... Labels
cULus listed for non-type IC
applications, suitable for use in damp
locations.
Ceiling Cut-Out: 5.90” x 28.96”
COMBOLIGHT®
Multi-Lamp Fixture
Next Generation
Recessed
Six (6) Light
PAR20 120V
Remodel Housing
Trimless
For use with 20W or 39W PAR20 120V lamps.
ORDERING INFORMATION
C6 R N 120 N N
Configuration
=
COMBOLIGHT
C6
Recessed Six (6) Light
www.cooperlighting.com
Housing
R = Remodel
Lamp Type / Wattage Label
050P20 = 50 Watt max. PAR20 120V
Primary Voltage
1 = 120V
Power Supply
N = None - Line Voltage Lamp
Trim Insert
N = Trimless
Lamp Mechanism
G = Double Gimbal
R = Retractable Double Gimbal
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
Trim Insert Finish
N = Trimless
Housing Interior/Electrical Door/Sleeve
Finish
W = White
B = Black
S = Industrial Silver
rev 022408
Loading...