RSA Lighting 850FD User Manual
DESCRIPTION
Thermal
Protector
Integral Low Voltage Transformers
Separate Wiring Compartment
18” flexible conduit
3.88”
19.38”
20.20”
20.88”
22.17”
6.25”
8.50”
5.38”
3.88”
1.60”
6.50”
16.83”
5.75”
Required
above
ceiling
45º x 45º
Adjust
Double
Gimbal
An adjustable Multi-lamp Recessed fixture with a 0.75” trim flange suitable for
downlighting and accent applications. Utilizes FIVE (5) 12V MR16 lamps.
For remodel applications. Insulation must be kept 3” from all sides and at least
1” above the housing.
SPECIFICATION FEATURES
A ... Housing
Housing and junction box are aluminum,
trim assembly is steel with powder coated
finish. Fixture utilizes a removable trim
sleeve to provide a 0.75” flange around
the ceiling opening and to help conceal
the inner hardware of the fixture from sight
below the ceiling. Can accommodate
various ceiling thickness.
B ... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
C ... Junction Box
Junction Box is UL listed for through branch
wiring, 6 #12 90º C supply conductors or
60º C for end of run. The fixture is also UL
listed as ‘access above ceiling not required’.
D ... Electrical
Integral electronic or magnetic low voltage
transformers. Transformers and electrical
are mounted in a separate metal enclosure
box attached to the junction box with 18”
of flexible conduit. Transformer enclosure
includes a separated wiring compartment and six knockouts for conduit entry.
Transformer enclosure features perforated
metal door for easy maintenance access
and cooler operation. Entire electrical
assembly (jbox and transformer enclosure)
is removable from the housing for easy
maintenance.
E ... Lamps
Five (5) 12V MR16 lamps mounted in
adjustable double gimbal. Lamp holders
are removable and may be regressed 1”
for additional cut-off. Lamps can accept
up to three optical accessories (i.e. lens
Catalog # Type
Project
Comments Date
Prepared by
+ hex louver + snoot). 45º x 45º locking
lamp adjustment. Beveled-edge lamp
ring is secured with threadless, bayonet
action. Optional retractable arm is available for lamp pulldown and extreme
aiming.
F ... Mounting
A mounting frame is provided which
inserts into the ceiling opening. The
housing is then pushed through the
mounting frame and secured with
screws.
G ... Labels
cULus listed for non-type IC
applications, suitable for use in damp
locations.
Ceiling Cut-Out: 5.13” x 20.47”
COMBOLIGHT®
Multi-Lamp Fixture
w/ 0.75” Trim Flange
Next Generation
Recessed
Five (5) Light
12V MR16
Remodel Housing
NOTES:
De-Rated wattage labels are available.
12V Primary voltage is available.
71W magnetic transformers are remote and sold separately.
ORDERING INFORMATION
C5 R T
Configuration
=
COMBOLIGHT
C5
Recessed Five (5) Light
www.cooperlighting.com
Housing
R = Remodel
Lamp Type / Wattage Label
037M16 = 37 Watt max. MR16 12V
042M16 = 42 Watt max. MR16 12V
050M16 = 50 Watt max. MR16 12V
071M16 = 71 Watt max. MR16 12V
Power Supply
E = Electronic Low Voltage
M = Magnetic Low Voltage
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
Power Supply
Voltage
1 = 120V
2 = 277V
Transformer
Transformer
Trim Flange
T = 0.75” Trim Flange
Lamp Mechanism
G = Double Gimbal
R = Retractable Double Gimbal
Trim Finish
W = White
B = Black
S = Industrial Silver
Housing Interior/Electrical Door/Sleeve
Finish
W = White
B = Black
S = Industrial Silver
rev 121107
Loading...