RSA Lighting 850FD-DD, 700FD-DD, 700ERV, 500DCS, 500ERV User Manual

DESCRIPTION

18” flexible conduit

13.38”

14.20”

19.70”

9.48”

9.95”

11.31”

13.01”

1.70”

9.45”

Required

above
ceiling

45º x 45º

Adjust

Double
Gimbal

6.69”

Thermal
Protector

Perforated
Meshplate

Separate Wiring

Compartment

9.25”

4.10”

Integral Electronic

Metal Halide Ballasts

An adjustable Single-lamp Recessed fixture for trimless installation suitable
for downlighting and accent applications. Utilizes ONE (1) PAR38 Metal Halide
lamp.

For remodel applications. Insulation must be kept 3” from all sides and at least
1” above the housing.

SPECIFICATION FEATURES

A ... Housing

Housing and junction box are aluminum,
trimless meshplate is steel with powder
coated finish. Perforated meshplate
allows for trimless installation in drywall/
plaster ceilings by allowing the ceiling’s
mudding compound to be applied right
up to the edge of the fixture opening.
Includes a beveled “knife-edge” lips to
ensure a clean edge. Can accommodate
various ceiling thickness.

B ... System Protection:

Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.

C ... Junction Box

Junction Box is UL listed for through branch
wiring, 6 #12 90º C supply conductors or
60º C for end of run. The fixture is also UL
listed as ‘access above ceiling not required’.

D ... Electrical

Integral electronic metal halide ballasts are
mounted in a separate metal enclosure
box attached to the junction box with
18” of flexible conduit. Ballast enclosure
includes a separated wiring compartment
and two knockouts for conduit entry and
features a perforated metal door for easy
maintenance access and cooler operation.
Entire electrical assembly (jbox and ballast
enclosure) is removable from the housing
for easy maintenance.

E ... Lamps

One (1) PAR38 Metal Halide lamp
mounted in adjustable double gimbal.
Lamp holder is removable and may be
regressed 1” for additional cut-off. Lamp
can accept optical accessories. 45º x 45º
locking lamp adjustment. Beveled-edge
lamp ring is secured with threadless, bay­onet action. Optional retractable arm is
available for lamp pulldown and extreme

Catalog # Type

Project

Comments Date

Prepared by

aiming. Includes Med. Base socket.

F ... Mounting

Mounting clips are provided which
mount the housing edge flush with the
finished ceiling line. Mounting clips are
secured to the housing through the
meshplate with screws.

G ... Labels

cULus listed for non-type IC
applications, suitable for use in damp
locations.

Ceiling Cut-Out: 7.80” x 7.80”

COMBOLIGHT®

Single-Lamp Fixture

PAR38 Metal Halide

Next Generation

Recessed

One (1) Light

Remodel Housing

Trimless

For use with 70W or 100W PAR38 Metal halide lamps.

ORDERING INFORMATION

C1 R E N N

RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX [phone]

Power Supply
Voltage
1 = 120V
2 = 277V

Power Supply
E = Electronic Metal Halide

Ballast

Lamp Mechanism
G = Double Gimbal
R = Retractable Double Gimbal

Trim Insert
N = Trimless

Housing Interior/Electrical Door/Sleeve
Finish
W = White
B = Black
S = Industrial Silver

Configuration

=

COMBOLIGHT

C1

Recessed One (1) Light

www.cooperlighting.com

Housing
R = Remodel

Lamp Type / Wattage Label
070M38 = 70 Watt PAR38 Metal Halide
100M38 = 100 Watt PAR38 Metal Halide

Specifications and Dimensions subject to change without notice.

Trim Insert Finish
N = Trimless

rev 050108