RSA Lighting 62-14410001 User Manual

DESCRIPTION

Thermal
Protector

7.45”

4.65”

27.87”

40.46”

29.37”

44.59”

15.01”

6.14”

4.64”

Integral Electronic

Metal Halide Ballasts

45º x 45º

Adjust

Double
Gimbal

An adjustable Multi-lamp Recessed fixture with a 0.75” trim flange suitable

for downlighting and accent applications. Utilizes SIX (6) PAR20 Metal Halide

lamps.

For new construction applications. Insulation must be kept 3” from all sides
and at least 1” above the housing.

SPECIFICATION FEATURES

A ... Housing

Housing, junction box & trim assembly
are all steel construction. Fixture utilizes
a removable trim sleeve to provide a

0.75” flange around the ceiling opening
and to help conceal the inner hardware
of the fixture from sight below the ceiling.
Can accommodate 0.50” to 1.25” ceiling
thickness. Optional Chicago Plenum
configuration available.

B ... System Protection:

Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.

C ... Junction Box

Junction Box is UL listed for through
branch wiring, 6 #12 90º C supply con­ductors or 60º C for end of run. The fixture

is also UL listed as ‘access above ceiling
not required’.

D ... Electrical

Electrical accessible through ceiling
opening. J-Box located on the side wall
of the housing behind removable access
doors. Integral electronic metal halide
ballasts on individually removable “trays”
for easy maintenance. May also be con­figured for remote power.

E ... Lamps

Six (6) PAR20 Metal Halide lamps mounted
in adjustable double gimbals. Lamp holders
are individually removable and may be re­gressed 1” for additional cut-off. Lamp can
accept up to three optical accessories (i.e.
lens + hex louver + snoot). 45º x 45º locking
lamp adjustment. Beveled-edge lamp ring

Catalog # Type

Project

Comments Date

Prepared by

is secured with threadless, bayonet ac­tion. Optional retractable arm is available
for lamp pulldown and extreme aiming.
Includes Med. base sockets.

F ... Mounting

Butterfly Brackets accept 1/2” EMT,
C Channel, Tbar fasteners, and bar
hangers. Four tabs on housing for
securing to structure.

G ... Labels

cULus listed for non-type IC
applications, suitable for use in damp
locations.

Ceiling Cut-Out: 5.44” x 28.67”

COMBOLIGHT®

Multi-Lamp Fixture

PAR20 Metal Halide

w/ 0.75” Trim Flange

Next Generation

Recessed

Six (6) Light

New Construction

Housing

For use with 20W or 39W PAR20MH lamps.

ORDERING INFORMATION

C6 E T

Configuration
C6 = COMBOLIGHT

Recessed Six (6) Light

www.cooperlighting.com

Lamp Type / Wattage Label
020M20 = 20 Watt PAR20 Metal Halide
039M20 = 39 Watt PAR20 Metal Halide

Housing
N = New Construction
C = Chicago Plenum

Power Supply
E = Electronic Metal Halide

Ballast

Specifications and Dimensions subject to change without notice.

RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX [phone]

Power Supply
Voltage
1 = 120V
2 = 277V

Lamp Mechanism

Trim Flange
T = 0.75” Trim Flange

G = Double Gimbal
R = Retractable Double Gimbal

Trim Finish
W = White
B = Black
S = Industrial Silver

Housing Interior/Electrical Door/Sleeve
Finish
W = White
B = Black
S = Industrial Silver

rev 022408