RSA Lighting 60 DHWH, 40 DHWH User Manual

DESCRIPTION

Thermal
Protector

7.45”

5.69”

17.07”

23.39”

27.52”

15.01”

12.01”

Integral Electronic

Metal Halide Ballasts

45º x 45º

Adjust

Double
Gimbal

5.69”

Perforated
Meshplate

An adjustable Multi-lamp Recessed fixture for trimless installation suitable for
downlighting and accent applications. Utilizes THREE (3) PAR30 Metal Halide
lamps.

For new construction applications. Insulation must be kept 3” from all sides
and at least 1” above the housing.

SPECIFICATION FEATURES

A ... Housing

Housing, junction box & trimless
meshplate assembly are all steel
construction. Perforated meshplate allows
for trimless installation in drywall/plaster
ceilings by allowing the ceiling’s mudding
compound to be applied right up to the
edge of the fixture opening. Includes
a beveled “knife-edge” lips to ensure a
clean edge. Can accommodate 0.50” to

1.25” ceiling thickness. Optional Chicago
Plenum configuration available.

B ... System Protection:

Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.

C ... Junction Box

Junction Box is UL listed for through

branch wiring, 6 #12 90º C supply
conductors or 60º C for end of run. The
fixture is also UL listed as ‘access above
ceiling not required’.

D ... Electrical

Electrical accessible through ceiling
opening. J-Box located on the side wall
of the housing behind removable access
doors. Integral electronic metal halide
ballasts on individually removable “trays”
for easy maintenance. May also be con­figured for remote power.

E ... Lamps

Three (3) PAR30 Metal Halide lamps mount­ed in adjustable double gimbals. Lamp
holders are individually removable and may
be regressed 1” for additional cut-off. Lamp
can accept up to three optical accessories
(i.e. lens + hex louver + snoot). 45º x 45º

Catalog # Type

Project

Comments Date

Prepared by

locking lamp adjustment. Beveled-edge
lamp ring is secured with threadless,
bayonet action. Optional retractable arm is
available for lamp pulldown and extreme
aiming. Includes Med. base sockets.

F ... Mounting

Butterfly Brackets accept 1/2” EMT,
C Channel, Tbar fasteners, and bar
hangers. Four tabs on housing for
securing to structure. Perforated flaps
along housing sides for securing trimless
insert to fixture and drywall.

G ... Labels

cULus listed for non-type IC
applications, suitable for use in damp
locations.

Ceiling Cut-Out: 6.49” x 17.87”

COMBOLIGHT®

Multi-Lamp Fixture

PAR30 Metal Halide

Next Generation

Recessed

Three (3) Light

New Construction

Housing

Trimless

For use with 39W or 70W PAR30MH lamps.

ORDERING INFORMATION

C3 E N N

Configuration
C3 = COMBOLIGHT

Recessed Three (3) Light

www.cooperlighting.com

Lamp Type / Wattage Label
039M30 = 39 Watt PAR30 Metal Halide
070M30 = 70 Watt PAR30 Metal Halide

Housing
N = New Construction
C = Chicago Plenum

Specifications and Dimensions subject to change without notice.

RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX [phone]

Power Supply
E = Electronic Metal Halide

Ballast

Power Supply
Voltage
1 = 120V
2 = 277V

Trim Insert
N = Trimless

Lamp Mechanism
G = Double Gimbal
R = Retractable Double Gimbal

Housing Interior/Electrical Door/Sleeve
Finish
W = White
B = Black
S = Industrial Silver

Trim Insert Finish
N = Trimless

rev 022408