RSA Lighting 12V AR70 User Manual

DESCRIPTION

Thermal
Protector

Separate Wiring

Compartment

18” flexible conduit

4.65”

12.01”

5.47”

7.95”

9.27”

10.96”

4.65”

1.60”

9.25”

4.10”

7.45”

Required

above
ceiling

45º x 45º

Adjust

Double
Gimbal

Integral

Low Voltage

Transformers

An adjustable Single-lamp Recessed fixture for trimless installation suitable for
downlighting and accent applications. Utilizes ONE (1) 12V AR70 lamp.

For remodel applications. Insulation must be kept 3” from all sides and at least
1” above the housing.

SPECIFICATION FEATURES

A ... Housing

Housing and junction box are aluminum,
trimless meshplate is steel with powder
coated finish. Perforated meshplate
allows for trimless installation in drywall/
plaster ceilings by allowing the ceiling’s
mudding compound to be applied right
up to the edge of the fixture opening.
Includes a beveled “knife-edge” lips to
ensure a clean edge. Can accommodate
various ceiling thickness.

B ... System Protection:

Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.

C ... Junction Box

Junction Box is UL listed for through branch
wiring, 6 #12 90º C supply conductors or
60º C for end of run. The fixture is also UL
listed as ‘access above ceiling not required’.

D ... Electrical

Integral electronic or magnetic low voltage
transformers. Transformers and electrical
are mounted in a separate metal enclosure
box attached to the junction box with 18”
of flexible conduit. Transformer enclosure
includes a separated wiring compartment
and two knockouts for conduit entry.
Transformer enclosure features perforated
metal door for easy maintenance access
and cooler operation. Entire electrical
assembly (jbox and transformer enclosure)
is removable from the housing for easy
maintenance.

E ... Lamps

One (1) 12V AR70 lamp mounted in
adjustable double gimbal. Lamp holder is
removable and may be regressed 1” for
additional cut-off. Lamp can accept up to
three optical accessories (i.e. lens + hex
louver + snoot). 45º x 45º locking lamp
adjustment. Beveled-edge lamp ring is

Catalog # Type

Project

Comments Date

Prepared by

secured with threadless, bayonet action.
Optional retractable arm is available
for lamp pulldown and extreme aiming.
Double contact bayonet base sockets
included.

F ... Mounting

Mounting clips are provided which
mount the housing edge flush with the
finished ceiling line. Mounting clips are
secured to the housing through the
meshplate with screws.

G ... Labels

cULus listed for non-type IC
applications, suitable for use in damp
locations.

Ceiling Cut-Out: 5.76” x 5.76”

COMBOLIGHT®

Single-Lamp Fixture

Next Generation

Recessed

One (1) Light

12V AR70

Remodel Housing

Trimless

NOTES:
De-Rated wattage labels are available.
12V Primary voltage is available.

ORDERING INFORMATION

C1 R N N

Power Supply
Voltage
1 = 120V
2 = 277V

Power Supply
E = Electronic Low Voltage

Transformer

M = Magnetic Low Voltage

Transformer

Trim Insert
N = Trimless

Lamp Mechanism
G = Double Gimbal
R = Retractable Double Gimbal

Housing Interior/Electrical Door/Sleeve
Finish
W = White
B = Black
S = Industrial Silver

Configuration

=

COMBOLIGHT

C1

Recessed One (1) Light

www.cooperlighting.com

Housing
R = Remodel

Lamp Type / Wattage Label
050A70 = 50 Watt max. AR70 12V

Specifications and Dimensions subject to change without notice.

RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX [phone]

Trim Insert Finish
N = Trimless

rev 022408