RSA Lighting RNC120F, 120ERV User Manual

DESCRIPTION

Thermal
Protector

7.45”

4.65”

23.23”

34.77”

24.73”

38.90”

15.01”

6.14”

4.64”

Integral Electronic

Metal Halide Ballasts

45º x 45º

Adjust

Double
Gimbal

An adjustable Multi-lamp Recessed fixture with a 0.75” trim flange suitable for
downlighting and accent applications. Utilizes FIVE (5) T4 GU6.5 Metal Halide
(GE® Constant Color Super Mini) lamps.

For new construction applications. Insulation must be kept 3” from all sides
and at least 1” above the housing.

SPECIFICATION FEATURES

A ... Housing

Housing, junction box & trim assembly
are all steel construction. Fixture utilizes
a removable trim sleeve to provide a

0.75” flange around the ceiling opening
and to help conceal the inner hardware
of the fixture from sight below the ceiling.
Can accommodate 0.50” to 1.25” ceiling
thickness. Optional Chicago Plenum
configuration available.

B ... System Protection:

Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.

C ... Junction Box

Junction Box is UL listed for through
branch wiring, 6 #12 90º C supply con­ductors or 60º C for end of run. The fixture

is also UL listed as ‘access above ceiling
not required’.

D ... Electrical

Electrical accessible through ceiling
opening. J-Box located on the side wall
of the housing behind removable access
doors. Integral electronic metal halide
ballasts on individually removable “trays”
for easy maintenance. May also be con­figured for remote power.

E ... Lamps

Five (5) T4 GU6.5 Metal Halide lamps with
reflectors mounted in adjustable double
gimbals. Lamp holders are individually
removable and may be regressed 1” for
additional cut-off. Lamp can accept up to
three optical accessories (i.e. lens + hex
louver + snoot). 45º x 45º locking lamp

Catalog # Type

Project

Comments Date

Prepared by

adjustment. Beveled-edge lamp ring is
secured with threadless, bayonet action.
Optional retractable arm is available
for lamp pulldown and extreme aiming.
Includes PGJ5 sockets.

F ... Mounting

Butterfly Brackets accept 1/2” EMT,
C Channel, Tbar fasteners, and bar
hangers. Four tabs on housing for
securing to structure.

G ... Labels

cULus listed for non-type IC
applications, suitable for use in damp
locations.

Ceiling Cut-Out: 5.44” x 24.02”

COMBOLIGHT®

Multi-Lamp Fixture

T4 GU6.5 Metal Halide

w/ 0.75” Trim Flange

Next Generation

Recessed

Five (5) Light

New Construction

Housing

T4 GU6.5 Lamp with Reflectors

This fixture utilizes the GE® SuperMini Constant Color
Lamp and includes high-performance clear aluminum reflec­tors in narrow, medium, or wide distributions. Non-standard
color reflectors are available upon request.

ORDERING INFORMATION

C5 E T

Configuration
C5 = COMBOLIGHT

Recessed Five (5) Light

www.cooperlighting.com

Lamp Type / Wattage Label / Reflector Type
020MCN = 20 Watt T4 GU6.5 SuperMini Narrow
020MCM = 20 Watt T4 GU6.5 SuperMini Medium
020MCW = 20 Watt T4 GU6.5 SuperMini Wide

Housing
N = New Construction
C = Chicago Plenum

Specifications and Dimensions subject to change without notice.

RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX [phone]

Power Supply
Voltage
1 = 120V
2 = 277V

Power Supply
E = Electronic Metal Halide

Ballast

Lamp Mechanism
G = Double Gimbal
R = Retractable Double Gimbal

Trim Flange
T = 0.75” Trim Flange

Housing Interior/Electrical Door
/Sleeve Finish
W = White
B = Black
S = Industrial Silver

Trim Finish
W = White
B = Black
S = Industrial Silver

rev 022408