R&S®FSVA3000 / R&S®FSV3000
Signal and Spectrum Analyzer
Instrument Security Procedures
(;Ý0ï2)
1179009702
Version 01
Instrument Security Procedures
The following abbreviations are used throughout this manual: R&S®FSVA3000 is abbreviated as R&S FSVA. R&S®FSV3000 is
abbreviated as R&S FSV. R&S FSV/A refers to both the R&S FSV3000 and the R&S FSVA3000.
R&S®FSVA3000 / R&S®FSV3000
Contents
1 Overview................................................................................................. 3
2 Instrument Models Covered..................................................................4
3 Security Terms and Definitions............................................................ 4
4 Types of Memory and Information Storage in the R&S FSV/A.......... 5
5 Instrument Declassification.................................................................. 8
6 Functionality Outside the Secured Area............................................10
7 Validity of Instrument Calibration after Declassification..................10
8 Securing Self Alignment Data when Security Write Protection is
Enabled................................................................................................. 11
Contents
9 Secure User Mode................................................................................12
10 Special Considerations for USB Ports...............................................12
1 Overview
It is often imperative that R&S FSV/A Signal and Spectrum Analyzers are used in a
secured environment. Generally these highly secured environments do not allow any
test equipment to leave the area unless it can be proven that no user information
leaves with the test equipment. Security concerns can arise when devices need to
leave a secured area, e.g. to be calibrated or serviced.
This document describes the types of memory and their usage in the R&S FSV/A. It
provides a statement regarding the volatility of all memory types and specifies the
steps required to declassify an instrument through memory clearing or sanitization procedures. These sanitization procedures are designed for customers who need to meet
the requirements specified by the US Defense Security Service (DSS).
3Instrument Security Procedures 1179.0097.02 ─ 01
R&S®FSVA3000 / R&S®FSV3000
2 Instrument Models Covered
Product name Order number
Instrument Models Covered
R&S®FSV3004
R&S®FSV3007
R&S®FSV3013
R&S®FSV3030
R&S®FSV3044
R&S®FSVA3004
R&S®FSVA3007
R&S®FSVA3013
R&S®FSVA3030
R&S®FSVA3044
1330.5000.04
1330.5000.07
1330.5000.13
1330.5000.30
1330.5000.43
1330.5000.05
1330.5000.08
1330.5000.14
1330.5000.31
1330.5000.44
3 Security Terms and Definitions
Clearing
The term "clearing" is defined in Section 8-301a of DoD 5220.22-M, "National Industrial
Security Program Operating Manual (NISPOM)". Clearing is the process of eradicating
the data on media so that the data can no longer be retrieved using the standard interfaces on the instrument. Therefore, clearing is typically used when the instrument is to
remain in an environment with an acceptable level of protection.
Sanitization
The term "sanitization" is defined in Section 8-301b of DoD 5220.22-M, "National
Industrial Security Program Operating Manual (NISPOM)". Sanitization is the process
of removing or eradicating stored data so that the data cannot be recovered using any
known technology. Instrument sanitization is typically required when an instrument is
moved from a secure to a non-secure environment, such as when it is returned for service of calibration.
The memory sanitization procedures described in this document are designed for customers who need to meet the requirements specified by the US Defense Security Service (DSS). These requirements are specified in the "Clearing and Sanitization Matrix"
in Section 14.1.16 of the ISFO "Manual for the Certification and Accreditation of Classified Systems under the NISPOM".
4Instrument Security Procedures 1179.0097.02 ─ 01
Loading...