ModelV: /
Instruction Manual
Important safety instructions: read carefully and keep for future
reference
GENERAL SAFETY INSTRUCTIONS
• Please keep instructions and packaging.
• Switch off the hot plate and disconnect from the main
s supply whenever the hot
plate is not in use or when cleaning.
• Regularly inspect the hot plate and the cable for da
mage. If there is sign
damage of any kind, the hot plate should not be used.
• Repairs to this hot plate should only be performed by a qualified electrician.
• Do not use the hot plate outdoors.
• Under no circumstances should the hot plate be op
erated in wet or damp
conditions.
• Never leave heated oils and fats unsupervised.
• Be careful of cookware protruding beyond the hot plate.
• If liquids are spilt on the hot plates remove from the mains supply and dry.
• Use the hot plate only for the intended p
urpose of heating and cooking food.
• Use only when cookware is placed on the hot plates.
• Be careful when placing on any heat sensitive surface.
• This appliance is not intended to be operated by means of an external timer or
se
parate remote-control system
• work time should not exceed 60 minutes
• this applia
nce is not intended for use by persons(including children) with
reduced physical, sensory or metal capabilities or lack of experience and
knowledge, unless they have been given supervision or introduction concerning
use of the appliance by person responsible for their safety,
• children should be supervised to ensure that they do
not play with the appliance
USING HOT PLATE
• Before using your hot plate for the first time, turn the hot plate to the highest
setting for 3 to 5 minutes to condition the Protective coating.
1. Switch “ON” the hot plate by turning the variable temp
erature control of the hot
plate to the selected temperature. When the Indicator light illuminates, the hot
plate is in use.
2. Turn the variable temperature control to achieve the d
esired temperature
POSITION FUNCTION
0 OFF
1 LOW TEMPERATURE
6 HIGH TEMPERATURE
3. When not in use, make sure the variab
le temperature control is in the “OFF”
position and mains plug is removed from the mains supply.
4. The Indicator Light will switch off when the hot plate reaches the selected
temperature.
5.
The Indicator Light will switch on again to
maintain the desired temperature.
6. Some requirements for the cookware used for cooking.
a) For the most efficient use of the Hot plate, the cookware used should be
with a soli
d b
ase and be as even as possible, and with a diameter of
about 18mm to 20mm, and a maximum quantity of 12 litres.
b) Cookware with a base diameter smaller than the diameter of the Solid
Hot plate shou
ld not be used.
c) Cookware with convex, concave or uneven bottoms
should not be used.
CLEANING
• Disconnect the plug from the mains supply when not in use.
• Do not immerse the Hot plate in any liquid.
• Clean the hot plates with a soft, damp cl
oth and mild
detergent.
• Spills on the enamel can be removed with a household cleaner.
•
Commercially available hot plate cleaners can use to preserve the natural finish
of the hot plate.
STORAGE
• Store the Hot plate after it has cooled down.
• When not in use, store the Hot plate in a safe, dry place, out of reach of
children.
SPECIFICATION
VOLTAGE
TOTAL POWER
684-6199 220-240V 50/60Hz 2500W (1000W + 1500W) 6
684-6192 / 727-1599 220-240V 5 0/60Hz 1500W
.
Loading...